* [PATCH v10 00/12] Initial Marvell PXA1908 support
@ 2024-04-24 18:42 Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one Duje Mihanović
` (11 more replies)
0 siblings, 12 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel,
Andy Shevchenko, Conor Dooley, Krzysztof Kozlowski
Hello,
This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.
USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:
During SMP initialization:
[ 0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[ 0.006542] CPU features: Unsupported CPU feature variation detected.
[ 0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[ 0.010710] Detected VIPT I-cache on CPU2
[ 0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[ 0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[ 0.014849] Detected VIPT I-cache on CPU3
[ 0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[ 0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]
SMMU probing fails:
[ 0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[ 0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[ 0.101816] arm-smmu c0010000.iommu: no translation support!
A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.
Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Changes in v10:
- Update trailers
- Rebase on v6.9-rc5
- Clock driver changes:
- Add a couple of forgotten clocks in APBC
- The clocks are thermal_clk, ipc_clk, ssp0_clk, ssp2_clk and swjtag
- The IDs and register offsets were already present, but I forgot to
actually register them
- Split each controller block into own file
- Drop unneeded -of in clock driver filenames
- Simplify struct pxa1908_clk_unit
- Convert to platform driver
- Add module metadata
- DTS changes:
- Properly name pinctrl nodes
- Drop pinctrl #size-cells, #address-cells, ranges and #gpio-size-cells
- Fix pinctrl input-schmitt configuration
- Link to v9: https://lore.kernel.org/20240402-pxa1908-lkml-v9-0-25a003e83c6f@skole.hr
Changes in v9:
- Update trailers and rebase on v6.9-rc2, no changes
- Link to v8: https://lore.kernel.org/20240110-pxa1908-lkml-v8-0-fea768a59474@skole.hr
Changes in v8:
- Drop SSPA patch
- Drop broken-cd from eMMC node
- Specify S-Boot hardcoded initramfs location in device tree
- Add ARM PMU node
- Correct inverted modem memory base and size
- Update trailers
- Rebase on next-20240110
- Link to v7: https://lore.kernel.org/20231102-pxa1908-lkml-v7-0-cabb1a0cb52b@skole.hr
and https://lore.kernel.org/20231102152033.5511-1-duje.mihanovic@skole.hr
Changes in v7:
- Suppress SND_MMP_SOC_SSPA on ARM64
- Update trailers
- Rebase on v6.6-rc7
- Link to v6: https://lore.kernel.org/r/20231010-pxa1908-lkml-v6-0-b2fe09240cf8@skole.hr
Changes in v6:
- Address maintainer comments:
- Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
- Drop GPIO patch as it's been pulled
- Update trailers
- Rebase on v6.6-rc5
- Link to v5: https://lore.kernel.org/r/20230812-pxa1908-lkml-v5-0-a5d51937ee34@skole.hr
Changes in v5:
- Address maintainer comments:
- Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
allocating 50 for each
- Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@skole.hr
Changes in v4:
- Address maintainer comments:
- Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr
Changes in v3:
- Address maintainer comments:
- Drop GPIO dynamic allocation patch
- Move clock register offsets into driver (instead of bindings file)
- Add missing Tested-by trailer to u32_fract patch
- Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@skole.hr
Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
- Clarify GPIO regressions on older PXA platforms
- Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
- Add missing includes to clock driver
- Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
- Dual license clock bindings
- Change clock IDs to decimal
- Fix underscores in dt node names
- Move chosen node to top of board dts
- Clean up documentation
- Reorder commits
- Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@skole.hr
---
Andy Shevchenko (1):
clk: mmp: Switch to use struct u32_fract instead of custom one
Duje Mihanović (11):
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Add Marvell PXA1908 APBC driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 MPMU driver
dt-bindings: marvell: Document PXA1908 SoC
arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
MAINTAINERS: add myself as Marvell PXA1908 maintainer
.../devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +
.../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 +++
.../bindings/pinctrl/pinctrl-single.yaml | 4 +
MAINTAINERS | 9 +
arch/arm64/Kconfig.platforms | 8 +
arch/arm64/boot/dts/marvell/Makefile | 3 +
.../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 328 +++++++++++++++++++++
arch/arm64/boot/dts/marvell/pxa1908.dtsi | 300 +++++++++++++++++++
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-frac.c | 57 ++--
drivers/clk/mmp/clk-of-mmp2.c | 26 +-
drivers/clk/mmp/clk-of-pxa168.c | 4 +-
drivers/clk/mmp/clk-of-pxa1928.c | 6 +-
drivers/clk/mmp/clk-of-pxa910.c | 4 +-
drivers/clk/mmp/clk-pxa1908-apbc.c | 131 ++++++++
drivers/clk/mmp/clk-pxa1908-apbcp.c | 84 ++++++
drivers/clk/mmp/clk-pxa1908-apmu.c | 123 ++++++++
drivers/clk/mmp/clk-pxa1908-mpmu.c | 112 +++++++
drivers/clk/mmp/clk.h | 10 +-
drivers/pinctrl/pinctrl-single.c | 1 +
include/dt-bindings/clock/marvell,pxa1908.h | 88 ++++++
21 files changed, 1296 insertions(+), 57 deletions(-)
---
base-commit: ed30a4a51bb196781c8058073ea720133a65596f
change-id: 20230803-pxa1908-lkml-6830e8da45c7
Best regards,
--
Duje Mihanović <duje.mihanovic@skole.hr>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v10 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 02/12] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible Duje Mihanović
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel,
Andy Shevchenko
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The struct mmp_clk_factor_tbl repeats the generic struct u32_fract.
Kill the custom one and use the generic one instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/clk/mmp/clk-frac.c | 57 ++++++++++++++++++++--------------------
drivers/clk/mmp/clk-of-mmp2.c | 26 +++++++++---------
drivers/clk/mmp/clk-of-pxa168.c | 4 +--
drivers/clk/mmp/clk-of-pxa1928.c | 6 ++---
drivers/clk/mmp/clk-of-pxa910.c | 4 +--
drivers/clk/mmp/clk.h | 10 +++----
6 files changed, 51 insertions(+), 56 deletions(-)
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 1b90867b60c4..6556f6ada2e8 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -26,14 +26,15 @@ static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
{
struct mmp_clk_factor *factor = to_clk_factor(hw);
u64 rate = 0, prev_rate;
+ struct u32_fract *d;
int i;
for (i = 0; i < factor->ftbl_cnt; i++) {
- prev_rate = rate;
- rate = *prate;
- rate *= factor->ftbl[i].den;
- do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+ d = &factor->ftbl[i];
+ prev_rate = rate;
+ rate = (u64)(*prate) * d->denominator;
+ do_div(rate, d->numerator * factor->masks->factor);
if (rate > drate)
break;
}
@@ -52,23 +53,22 @@ static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
{
struct mmp_clk_factor *factor = to_clk_factor(hw);
struct mmp_clk_factor_masks *masks = factor->masks;
- unsigned int val, num, den;
+ struct u32_fract d;
+ unsigned int val;
u64 rate;
val = readl_relaxed(factor->base);
/* calculate numerator */
- num = (val >> masks->num_shift) & masks->num_mask;
+ d.numerator = (val >> masks->num_shift) & masks->num_mask;
/* calculate denominator */
- den = (val >> masks->den_shift) & masks->den_mask;
-
- if (!den)
+ d.denominator = (val >> masks->den_shift) & masks->den_mask;
+ if (!d.denominator)
return 0;
- rate = parent_rate;
- rate *= den;
- do_div(rate, num * factor->masks->factor);
+ rate = (u64)parent_rate * d.denominator;
+ do_div(rate, d.numerator * factor->masks->factor);
return rate;
}
@@ -82,18 +82,18 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
int i;
unsigned long val;
unsigned long flags = 0;
+ struct u32_fract *d;
u64 rate = 0;
for (i = 0; i < factor->ftbl_cnt; i++) {
- rate = prate;
- rate *= factor->ftbl[i].den;
- do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+ d = &factor->ftbl[i];
+ rate = (u64)prate * d->denominator;
+ do_div(rate, d->numerator * factor->masks->factor);
if (rate > drate)
break;
}
- if (i > 0)
- i--;
+ d = i ? &factor->ftbl[i - 1] : &factor->ftbl[0];
if (factor->lock)
spin_lock_irqsave(factor->lock, flags);
@@ -101,10 +101,10 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
val = readl_relaxed(factor->base);
val &= ~(masks->num_mask << masks->num_shift);
- val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+ val |= (d->numerator & masks->num_mask) << masks->num_shift;
val &= ~(masks->den_mask << masks->den_shift);
- val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+ val |= (d->denominator & masks->den_mask) << masks->den_shift;
writel_relaxed(val, factor->base);
@@ -118,7 +118,8 @@ static int clk_factor_init(struct clk_hw *hw)
{
struct mmp_clk_factor *factor = to_clk_factor(hw);
struct mmp_clk_factor_masks *masks = factor->masks;
- u32 val, num, den;
+ struct u32_fract d;
+ u32 val;
int i;
unsigned long flags = 0;
@@ -128,23 +129,22 @@ static int clk_factor_init(struct clk_hw *hw)
val = readl(factor->base);
/* calculate numerator */
- num = (val >> masks->num_shift) & masks->num_mask;
+ d.numerator = (val >> masks->num_shift) & masks->num_mask;
/* calculate denominator */
- den = (val >> masks->den_shift) & masks->den_mask;
+ d.denominator = (val >> masks->den_shift) & masks->den_mask;
for (i = 0; i < factor->ftbl_cnt; i++)
- if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+ if (d.denominator == factor->ftbl[i].denominator &&
+ d.numerator == factor->ftbl[i].numerator)
break;
if (i >= factor->ftbl_cnt) {
val &= ~(masks->num_mask << masks->num_shift);
- val |= (factor->ftbl[0].num & masks->num_mask) <<
- masks->num_shift;
+ val |= (factor->ftbl[0].numerator & masks->num_mask) << masks->num_shift;
val &= ~(masks->den_mask << masks->den_shift);
- val |= (factor->ftbl[0].den & masks->den_mask) <<
- masks->den_shift;
+ val |= (factor->ftbl[0].denominator & masks->den_mask) << masks->den_shift;
}
if (!(val & masks->enable_mask) || i >= factor->ftbl_cnt) {
@@ -168,8 +168,7 @@ static const struct clk_ops clk_factor_ops = {
struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
unsigned long flags, void __iomem *base,
struct mmp_clk_factor_masks *masks,
- struct mmp_clk_factor_tbl *ftbl,
- unsigned int ftbl_cnt, spinlock_t *lock)
+ struct u32_fract *ftbl, unsigned int ftbl_cnt, spinlock_t *lock)
{
struct mmp_clk_factor *factor;
struct clk_init_data init;
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index eaad36ee323d..a4f15cee630e 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -143,9 +143,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
.den_shift = 0,
};
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
- {.num = 8125, .den = 1536}, /*14.745MHZ */
- {.num = 3521, .den = 689}, /*19.23MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+ { .numerator = 8125, .denominator = 1536 }, /* 14.745MHZ */
+ { .numerator = 3521, .denominator = 689 }, /* 19.23MHZ */
};
static struct mmp_clk_factor_masks i2s_factor_masks = {
@@ -157,16 +157,16 @@ static struct mmp_clk_factor_masks i2s_factor_masks = {
.enable_mask = 0xd0000000,
};
-static struct mmp_clk_factor_tbl i2s_factor_tbl[] = {
- {.num = 24868, .den = 511}, /* 2.0480 MHz */
- {.num = 28003, .den = 793}, /* 2.8224 MHz */
- {.num = 24941, .den = 1025}, /* 4.0960 MHz */
- {.num = 28003, .den = 1586}, /* 5.6448 MHz */
- {.num = 31158, .den = 2561}, /* 8.1920 MHz */
- {.num = 16288, .den = 1845}, /* 11.2896 MHz */
- {.num = 20772, .den = 2561}, /* 12.2880 MHz */
- {.num = 8144, .den = 1845}, /* 22.5792 MHz */
- {.num = 10386, .den = 2561}, /* 24.5760 MHz */
+static struct u32_fract i2s_factor_tbl[] = {
+ { .numerator = 24868, .denominator = 511 }, /* 2.0480 MHz */
+ { .numerator = 28003, .denominator = 793 }, /* 2.8224 MHz */
+ { .numerator = 24941, .denominator = 1025 }, /* 4.0960 MHz */
+ { .numerator = 28003, .denominator = 1586 }, /* 5.6448 MHz */
+ { .numerator = 31158, .denominator = 2561 }, /* 8.1920 MHz */
+ { .numerator = 16288, .denominator = 1845 }, /* 11.2896 MHz */
+ { .numerator = 20772, .denominator = 2561 }, /* 12.2880 MHz */
+ { .numerator = 8144, .denominator = 1845 }, /* 22.5792 MHz */
+ { .numerator = 10386, .denominator = 2561 }, /* 24.5760 MHz */
};
static DEFINE_SPINLOCK(acgr_lock);
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
index c5a7ba1deaa3..5f250427e60d 100644
--- a/drivers/clk/mmp/clk-of-pxa168.c
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -106,8 +106,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
.den_shift = 0,
};
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
- {.num = 8125, .den = 1536}, /*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+ { .numerator = 8125, .denominator = 1536 }, /* 14.745MHZ */
};
static void pxa168_pll_init(struct pxa168_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa1928.c b/drivers/clk/mmp/clk-of-pxa1928.c
index 9def4b5f10e9..ebb6e278eda3 100644
--- a/drivers/clk/mmp/clk-of-pxa1928.c
+++ b/drivers/clk/mmp/clk-of-pxa1928.c
@@ -61,9 +61,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
.den_shift = 0,
};
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
- {.num = 832, .den = 234}, /*58.5MHZ */
- {.num = 1, .den = 1}, /*26MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+ { .numerator = 832, .denominator = 234 }, /* 58.5MHZ */
+ { .numerator = 1, .denominator = 1 }, /* 26MHZ */
};
static void pxa1928_pll_init(struct pxa1928_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c
index 7a38c424782e..fe65e7bdb411 100644
--- a/drivers/clk/mmp/clk-of-pxa910.c
+++ b/drivers/clk/mmp/clk-of-pxa910.c
@@ -86,8 +86,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
.den_shift = 0,
};
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
- {.num = 8125, .den = 1536}, /*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+ { .numerator = 8125, .denominator = 1536 }, /* 14.745MHZ */
};
static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 55ac05379781..c83cec169ddc 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -3,6 +3,7 @@
#define __MACH_MMP_CLK_H
#include <linux/clk-provider.h>
+#include <linux/math.h>
#include <linux/pm_domain.h>
#include <linux/clkdev.h>
@@ -20,16 +21,11 @@ struct mmp_clk_factor_masks {
unsigned int enable_mask;
};
-struct mmp_clk_factor_tbl {
- unsigned int num;
- unsigned int den;
-};
-
struct mmp_clk_factor {
struct clk_hw hw;
void __iomem *base;
struct mmp_clk_factor_masks *masks;
- struct mmp_clk_factor_tbl *ftbl;
+ struct u32_fract *ftbl;
unsigned int ftbl_cnt;
spinlock_t *lock;
};
@@ -37,7 +33,7 @@ struct mmp_clk_factor {
extern struct clk *mmp_clk_register_factor(const char *name,
const char *parent_name, unsigned long flags,
void __iomem *base, struct mmp_clk_factor_masks *masks,
- struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
+ struct u32_fract *ftbl, unsigned int ftbl_cnt,
spinlock_t *lock);
/* Clock type "mix" */
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 02/12] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 03/12] pinctrl: single: " Duje Mihanović
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
index c11495524dd2..1ce24ad8bc73 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
@@ -33,6 +33,10 @@ properties:
- ti,omap5-padconf
- ti,j7200-padconf
- const: pinctrl-single
+ - items:
+ - enum:
+ - marvell,pxa1908-padconf
+ - const: pinconf-single
reg:
maxItems: 1
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 03/12] pinctrl: single: add marvell,pxa1908-padconf compatible
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 02/12] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings Duje Mihanović
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add the "marvell,pxa1908-padconf" compatible to allow migrating to a
separate pinctrl driver later.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/pinctrl/pinctrl-single.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 19cc0db771a5..c15bf3cbabd7 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -1967,6 +1967,7 @@ static const struct pcs_soc_data pinconf_single = {
};
static const struct of_device_id pcs_of_match[] = {
+ { .compatible = "marvell,pxa1908-padconf", .data = &pinconf_single },
{ .compatible = "ti,am437-padconf", .data = &pinctrl_single_am437x },
{ .compatible = "ti,am654-padconf", .data = &pinctrl_single_am654 },
{ .compatible = "ti,dra7-padconf", .data = &pinctrl_single_dra7 },
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (2 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 03/12] pinctrl: single: " Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 05/12] clk: mmp: Add Marvell PXA1908 APBC driver Duje Mihanović
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel,
Conor Dooley
Add dt bindings and documentation for the Marvell PXA1908 clock
controller.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
.../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 ++++++++++++
include/dt-bindings/clock/marvell,pxa1908.h | 88 ++++++++++++++++++++++
2 files changed, 136 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..4e78933232b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+ - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+ The PXA1908 clock subsystem generates and supplies clock to various
+ controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+ controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+ and APMU roughly corresponding to internal buses.
+
+ All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+ compatible:
+ enum:
+ - marvell,pxa1908-apbc
+ - marvell,pxa1908-apbcp
+ - marvell,pxa1908-mpmu
+ - marvell,pxa1908-apmu
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ # APMU block:
+ - |
+ clock-controller@d4282800 {
+ compatible = "marvell,pxa1908-apmu";
+ reg = <0xd4282800 0x400>;
+ #clock-cells = <1>;
+ };
diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h
new file mode 100644
index 000000000000..fb15b0d0cd4c
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa1908.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+#ifndef __DTS_MARVELL_PXA1908_CLOCK_H
+#define __DTS_MARVELL_PXA1908_CLOCK_H
+
+/* plls */
+#define PXA1908_CLK_CLK32 1
+#define PXA1908_CLK_VCTCXO 2
+#define PXA1908_CLK_PLL1_624 3
+#define PXA1908_CLK_PLL1_416 4
+#define PXA1908_CLK_PLL1_499 5
+#define PXA1908_CLK_PLL1_832 6
+#define PXA1908_CLK_PLL1_1248 7
+#define PXA1908_CLK_PLL1_D2 8
+#define PXA1908_CLK_PLL1_D4 9
+#define PXA1908_CLK_PLL1_D8 10
+#define PXA1908_CLK_PLL1_D16 11
+#define PXA1908_CLK_PLL1_D6 12
+#define PXA1908_CLK_PLL1_D12 13
+#define PXA1908_CLK_PLL1_D24 14
+#define PXA1908_CLK_PLL1_D48 15
+#define PXA1908_CLK_PLL1_D96 16
+#define PXA1908_CLK_PLL1_D13 17
+#define PXA1908_CLK_PLL1_32 18
+#define PXA1908_CLK_PLL1_208 19
+#define PXA1908_CLK_PLL1_117 20
+#define PXA1908_CLK_PLL1_416_GATE 21
+#define PXA1908_CLK_PLL1_624_GATE 22
+#define PXA1908_CLK_PLL1_832_GATE 23
+#define PXA1908_CLK_PLL1_1248_GATE 24
+#define PXA1908_CLK_PLL1_D2_GATE 25
+#define PXA1908_CLK_PLL1_499_EN 26
+#define PXA1908_CLK_PLL2VCO 27
+#define PXA1908_CLK_PLL2 28
+#define PXA1908_CLK_PLL2P 29
+#define PXA1908_CLK_PLL2VCODIV3 30
+#define PXA1908_CLK_PLL3VCO 31
+#define PXA1908_CLK_PLL3 32
+#define PXA1908_CLK_PLL3P 33
+#define PXA1908_CLK_PLL3VCODIV3 34
+#define PXA1908_CLK_PLL4VCO 35
+#define PXA1908_CLK_PLL4 36
+#define PXA1908_CLK_PLL4P 37
+#define PXA1908_CLK_PLL4VCODIV3 38
+
+/* apb (apbc) peripherals */
+#define PXA1908_CLK_UART0 1
+#define PXA1908_CLK_UART1 2
+#define PXA1908_CLK_GPIO 3
+#define PXA1908_CLK_PWM0 4
+#define PXA1908_CLK_PWM1 5
+#define PXA1908_CLK_PWM2 6
+#define PXA1908_CLK_PWM3 7
+#define PXA1908_CLK_SSP0 8
+#define PXA1908_CLK_SSP1 9
+#define PXA1908_CLK_IPC_RST 10
+#define PXA1908_CLK_RTC 11
+#define PXA1908_CLK_TWSI0 12
+#define PXA1908_CLK_KPC 13
+#define PXA1908_CLK_SWJTAG 14
+#define PXA1908_CLK_SSP2 15
+#define PXA1908_CLK_TWSI1 16
+#define PXA1908_CLK_THERMAL 17
+#define PXA1908_CLK_TWSI3 18
+
+/* apb (apbcp) peripherals */
+#define PXA1908_CLK_UART2 1
+#define PXA1908_CLK_TWSI2 2
+#define PXA1908_CLK_AICER 3
+
+/* axi (apmu) peripherals */
+#define PXA1908_CLK_CCIC1 1
+#define PXA1908_CLK_ISP 2
+#define PXA1908_CLK_DSI1 3
+#define PXA1908_CLK_DISP1 4
+#define PXA1908_CLK_CCIC0 5
+#define PXA1908_CLK_SDH0 6
+#define PXA1908_CLK_SDH1 7
+#define PXA1908_CLK_USB 8
+#define PXA1908_CLK_NF 9
+#define PXA1908_CLK_CORE_DEBUG 10
+#define PXA1908_CLK_VPU 11
+#define PXA1908_CLK_GC 12
+#define PXA1908_CLK_SDH2 13
+#define PXA1908_CLK_GC2D 14
+#define PXA1908_CLK_TRACE 15
+#define PXA1908_CLK_DVC_DFC_DEBUG 16
+
+#endif
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 05/12] clk: mmp: Add Marvell PXA1908 APBC driver
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (3 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 06/12] clk: mmp: Add Marvell PXA1908 APBCP driver Duje Mihanović
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add driver for the APBC controller block found on Marvell's PXA1908 SoC.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-pxa1908-apbc.c | 131 +++++++++++++++++++++++++++++++++++++
2 files changed, 132 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 441bf83080a1..685bb80f8ae1 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
-obj-y += clk-of-pxa1928.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o
diff --git a/drivers/clk/mmp/clk-pxa1908-apbc.c b/drivers/clk/mmp/clk-pxa1908-apbc.c
new file mode 100644
index 000000000000..a418b9f895c1
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-apbc.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x1c
+#define APBC_SSP1 0x20
+#define APBC_IPC_RST 0x24
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x30
+#define APBC_SWJTAG 0x40
+#define APBC_SSP2 0x4c
+#define APBC_TWSI1 0x60
+#define APBC_THERMAL 0x6c
+#define APBC_TWSI3 0x70
+
+#define APBC_NR_CLKS 19
+
+struct pxa1908_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *base;
+};
+
+static DEFINE_SPINLOCK(pwm0_lock);
+static DEFINE_SPINLOCK(pwm2_lock);
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+static const char * const ssp_parent_names[] = {"pll1_d16", "pll1_d48", "pll1_d24", "pll1_d12"};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {PXA1908_CLK_TWSI0, "twsi0_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_TWSI1, "twsi1_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_TWSI3, "twsi3_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 3, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1908_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1908_CLK_PWM0, "pwm0_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM0, 0x2, 2, 0, 0, &pwm0_lock},
+ {PXA1908_CLK_PWM1, "pwm1_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM1, 0x6, 2, 0, 0, NULL},
+ {PXA1908_CLK_PWM2, "pwm2_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM2, 0x2, 2, 0, 0, NULL},
+ {PXA1908_CLK_PWM3, "pwm3_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM3, 0x6, 2, 0, 0, NULL},
+ {PXA1908_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 3, 0, 0, &uart0_lock},
+ {PXA1908_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 3, 0, 0, &uart1_lock},
+ {PXA1908_CLK_THERMAL, "thermal_clk", NULL, 0, APBC_THERMAL, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_IPC_RST, "ipc_clk", NULL, 0, APBC_IPC_RST, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_SSP0, "ssp0_clk", "ssp0_mux", 0, APBC_SSP0, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_SSP2, "ssp2_clk", "ssp2_mux", 0, APBC_SSP2, 0x7, 3, 0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP0, 4, 3, 0, NULL},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP2, 4, 3, 0, NULL},
+};
+
+static void pxa1908_apb_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+ struct clk *clk;
+
+ mmp_clk_register_gate(NULL, "pwm01_apb_share", "pll1_d48",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->base + APBC_PWM0,
+ 0x5, 1, 0, 0, &pwm0_lock);
+ mmp_clk_register_gate(NULL, "pwm23_apb_share", "pll1_d48",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->base + APBC_PWM2,
+ 0x5, 1, 0, 0, &pwm2_lock);
+ clk = mmp_clk_register_apbc("swjtag", NULL,
+ pxa_unit->base + APBC_SWJTAG, 10, 0, NULL);
+ mmp_clk_add(unit, PXA1908_CLK_SWJTAG, clk);
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->base,
+ ARRAY_SIZE(apbc_mux_clks));
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static int pxa1908_apbc_probe(struct platform_device *pdev)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+ if (IS_ERR(pxa_unit))
+ return PTR_ERR(pxa_unit);
+
+ pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pxa_unit->base))
+ return PTR_ERR(pxa_unit->base);
+
+ mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, APBC_NR_CLKS);
+
+ pxa1908_apb_periph_clk_init(pxa_unit);
+
+ return 0;
+}
+
+static const struct of_device_id pxa1908_apbc_match_table[] = {
+ { .compatible = "marvell,pxa1908-apbc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_apbc_match_table);
+
+static struct platform_driver pxa1908_apbc_driver = {
+ .probe = pxa1908_apbc_probe,
+ .driver = {
+ .name = "pxa1908-apbc",
+ .of_match_table = pxa1908_apbc_match_table
+ }
+};
+module_platform_driver(pxa1908_apbc_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 APBC Clock Driver");
+MODULE_LICENSE("GPL");
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 06/12] clk: mmp: Add Marvell PXA1908 APBCP driver
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (4 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 05/12] clk: mmp: Add Marvell PXA1908 APBC driver Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 07/12] clk: mmp: Add Marvell PXA1908 APMU driver Duje Mihanović
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add driver for the APBCP controller block found on Marvell's PXA1908
SoC.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-pxa1908-apbcp.c | 84 +++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 685bb80f8ae1..038bcd4d035e 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
-obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o
diff --git a/drivers/clk/mmp/clk-pxa1908-apbcp.c b/drivers/clk/mmp/clk-pxa1908-apbcp.c
new file mode 100644
index 000000000000..2a53cf276407
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-apbcp.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APBCP_UART2 0x1c
+#define APBCP_TWSI2 0x28
+#define APBCP_AICER 0x38
+
+#define APBCP_NR_CLKS 4
+
+struct pxa1908_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *base;
+};
+
+static DEFINE_SPINLOCK(uart2_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+ {PXA1908_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {PXA1908_CLK_TWSI2, "twsi2_clk", "pll1_32", CLK_SET_RATE_PARENT, APBCP_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA1908_CLK_AICER, "ripc_clk", NULL, 0, APBCP_AICER, 0x7, 0x2, 0x0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static void pxa1908_apb_p_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->base,
+ ARRAY_SIZE(apbcp_mux_clks));
+ mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->base,
+ ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static int pxa1908_apbcp_probe(struct platform_device *pdev)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+ if (IS_ERR(pxa_unit))
+ return PTR_ERR(pxa_unit);
+
+ pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pxa_unit->base))
+ return PTR_ERR(pxa_unit->base);
+
+ mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, APBCP_NR_CLKS);
+
+ pxa1908_apb_p_periph_clk_init(pxa_unit);
+
+ return 0;
+}
+
+static const struct of_device_id pxa1908_apbcp_match_table[] = {
+ { .compatible = "marvell,pxa1908-apbcp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_apbcp_match_table);
+
+static struct platform_driver pxa1908_apbcp_driver = {
+ .probe = pxa1908_apbcp_probe,
+ .driver = {
+ .name = "pxa1908-apbcp",
+ .of_match_table = pxa1908_apbcp_match_table
+ }
+};
+module_platform_driver(pxa1908_apbcp_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 APBCP Clock Driver");
+MODULE_LICENSE("GPL");
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 07/12] clk: mmp: Add Marvell PXA1908 APMU driver
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (5 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 06/12] clk: mmp: Add Marvell PXA1908 APBCP driver Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 08/12] clk: mmp: Add Marvell PXA1908 MPMU driver Duje Mihanović
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add driver for the APMU controller block found on Marvell's PXA1908 SoC.
This driver is incomplete, lacking support for (at least) GPU, VPU, DSI
and CCIC (camera related) clocks.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-pxa1908-apmu.c | 123 +++++++++++++++++++++++++++++++++++++
2 files changed, 124 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 038bcd4d035e..a8b1a4b08824 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
-obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o clk-pxa1908-apmu.o
diff --git a/drivers/clk/mmp/clk-pxa1908-apmu.c b/drivers/clk/mmp/clk-pxa1908-apmu.c
new file mode 100644
index 000000000000..693254539063
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-apmu.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APMU_CLK_GATE_CTRL 0x40
+#define APMU_CCIC1 0x24
+#define APMU_ISP 0x38
+#define APMU_DSI1 0x44
+#define APMU_DISP1 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_NF 0x60
+#define APMU_VPU 0xa4
+#define APMU_GC 0xcc
+#define APMU_SDH2 0xe0
+#define APMU_GC2D 0xf4
+#define APMU_TRACE 0x108
+#define APMU_DVC_DFC_DEBUG 0x140
+
+#define APMU_NR_CLKS 17
+
+struct pxa1908_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *base;
+};
+
+static DEFINE_SPINLOCK(pll1_lock);
+static struct mmp_param_general_gate_clk pll1_gate_clks[] = {
+ {PXA1908_CLK_PLL1_D2_GATE, "pll1_d2_gate", "pll1_d2", 0, APMU_CLK_GATE_CTRL, 29, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_416_GATE, "pll1_416_gate", "pll1_416", 0, APMU_CLK_GATE_CTRL, 27, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_624_GATE, "pll1_624_gate", "pll1_624", 0, APMU_CLK_GATE_CTRL, 26, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_832_GATE, "pll1_832_gate", "pll1_832", 0, APMU_CLK_GATE_CTRL, 30, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_1248_GATE, "pll1_1248_gate", "pll1_1248", 0, APMU_CLK_GATE_CTRL, 28, 0, &pll1_lock},
+};
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+
+static const char * const sdh_parent_names[] = {"pll1_416", "pll1_624"};
+
+static struct mmp_clk_mix_config sdh_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(3, 8, 2, 6, 11),
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA1908_CLK_USB, "usb_clk", NULL, 0, APMU_USB, 0x9, 0x9, 0x1, 0, NULL},
+ {PXA1908_CLK_SDH0, "sdh0_clk", "sdh0_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH0, 0x12, 0x12, 0x0, 0, &sdh0_lock},
+ {PXA1908_CLK_SDH1, "sdh1_clk", "sdh1_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH1, 0x12, 0x12, 0x0, 0, &sdh1_lock},
+ {PXA1908_CLK_SDH2, "sdh2_clk", "sdh2_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH2, 0x12, 0x12, 0x0, 0, &sdh2_lock}
+};
+
+static void pxa1908_axi_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_general_gate_clks(unit, pll1_gate_clks,
+ pxa_unit->base, ARRAY_SIZE(pll1_gate_clks));
+
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->base + APMU_SDH0;
+ mmp_clk_register_mix(NULL, "sdh0_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh0_lock);
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->base + APMU_SDH1;
+ mmp_clk_register_mix(NULL, "sdh1_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh1_lock);
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->base + APMU_SDH2;
+ mmp_clk_register_mix(NULL, "sdh2_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh2_lock);
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static int pxa1908_apmu_probe(struct platform_device *pdev)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+ if (IS_ERR(pxa_unit))
+ return PTR_ERR(pxa_unit);
+
+ pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pxa_unit->base))
+ return PTR_ERR(pxa_unit->base);
+
+ mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, APMU_NR_CLKS);
+
+ pxa1908_axi_periph_clk_init(pxa_unit);
+
+ return 0;
+}
+
+static const struct of_device_id pxa1908_apmu_match_table[] = {
+ { .compatible = "marvell,pxa1908-apmu" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_apmu_match_table);
+
+static struct platform_driver pxa1908_apmu_driver = {
+ .probe = pxa1908_apmu_probe,
+ .driver = {
+ .name = "pxa1908-apmu",
+ .of_match_table = pxa1908_apmu_match_table
+ }
+};
+module_platform_driver(pxa1908_apmu_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 APMU Clock Driver");
+MODULE_LICENSE("GPL");
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 08/12] clk: mmp: Add Marvell PXA1908 MPMU driver
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (6 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 07/12] clk: mmp: Add Marvell PXA1908 APMU driver Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 09/12] dt-bindings: marvell: Document PXA1908 SoC Duje Mihanović
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add driver for the MPMU controller block on Marvell's PXA1908 SoC. The
driver is incomplete, currently only supporting the fixed PLL1; dynamic
PLLs 2-4 and CPU/DDR/AXI clock support is missing.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-pxa1908-mpmu.c | 112 +++++++++++++++++++++++++++++++++++++
2 files changed, 113 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index a8b1a4b08824..062cd87fa8dd 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
-obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o clk-pxa1908-apmu.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o clk-pxa1908-apmu.o clk-pxa1908-mpmu.o
diff --git a/drivers/clk/mmp/clk-pxa1908-mpmu.c b/drivers/clk/mmp/clk-pxa1908-mpmu.c
new file mode 100644
index 000000000000..e3337bacaadd
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-mpmu.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define MPMU_UART_PLL 0x14
+
+#define MPMU_NR_CLKS 39
+
+struct pxa1908_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {PXA1908_CLK_CLK32, "clk32", NULL, 0, 32768},
+ {PXA1908_CLK_VCTCXO, "vctcxo", NULL, 0, 26 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_624, "pll1_624", NULL, 0, 624 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_416, "pll1_416", NULL, 0, 416 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_499, "pll1_499", NULL, 0, 499 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_832, "pll1_832", NULL, 0, 832 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_1248, "pll1_1248", NULL, 0, 1248 * HZ_PER_MHZ},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {PXA1908_CLK_PLL1_D2, "pll1_d2", "pll1_624", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D4, "pll1_d4", "pll1_d2", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D6, "pll1_d6", "pll1_d2", 1, 3, 0},
+ {PXA1908_CLK_PLL1_D8, "pll1_d8", "pll1_d4", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D12, "pll1_d12", "pll1_d6", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D13, "pll1_d13", "pll1_624", 1, 13, 0},
+ {PXA1908_CLK_PLL1_D16, "pll1_d16", "pll1_d8", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D24, "pll1_d24", "pll1_d12", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D48, "pll1_d48", "pll1_d24", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D96, "pll1_d96", "pll1_d48", 1, 2, 0},
+ {PXA1908_CLK_PLL1_32, "pll1_32", "pll1_d13", 2, 3, 0},
+ {PXA1908_CLK_PLL1_208, "pll1_208", "pll1_d2", 2, 3, 0},
+ {PXA1908_CLK_PLL1_117, "pll1_117", "pll1_624", 3, 16, 0},
+};
+
+static struct u32_fract uart_factor_tbl[] = {
+ {.numerator = 8125, .denominator = 1536}, /* 14.745MHz */
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = GENMASK(12, 0),
+ .den_mask = GENMASK(12, 0),
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static void pxa1908_pll_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ mmp_clk_register_factor("uart_pll", "pll1_d4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+}
+
+static int pxa1908_mpmu_probe(struct platform_device *pdev)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+ if (IS_ERR(pxa_unit))
+ return PTR_ERR(pxa_unit);
+
+ pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pxa_unit->base))
+ return PTR_ERR(pxa_unit->base);
+
+ mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, MPMU_NR_CLKS);
+
+ pxa1908_pll_init(pxa_unit);
+
+ return 0;
+}
+
+static const struct of_device_id pxa1908_mpmu_match_table[] = {
+ { .compatible = "marvell,pxa1908-mpmu" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_mpmu_match_table);
+
+static struct platform_driver pxa1908_mpmu_driver = {
+ .probe = pxa1908_mpmu_probe,
+ .driver = {
+ .name = "pxa1908-mpmu",
+ .of_match_table = pxa1908_mpmu_match_table
+ }
+};
+module_platform_driver(pxa1908_mpmu_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@skole.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 MPMU Clock Driver");
+MODULE_LICENSE("GPL");
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 09/12] dt-bindings: marvell: Document PXA1908 SoC
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (7 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 08/12] clk: mmp: Add Marvell PXA1908 MPMU driver Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform Duje Mihanović
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel,
Krzysztof Kozlowski
Add dt binding for the Marvell PXA1908 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 4c43eaf3632e..f73bb8ec3a1a 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -35,6 +35,11 @@ properties:
- enum:
- dell,wyse-ariel
- const: marvell,mmp3
+ - description: PXA1908 based boards
+ items:
+ - enum:
+ - samsung,coreprimevelte
+ - const: marvell,pxa1908
additionalProperties: true
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (8 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 09/12] dt-bindings: marvell: Document PXA1908 SoC Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 11/12] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 12/12] MAINTAINERS: add myself as Marvell PXA1908 maintainer Duje Mihanović
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add ARCH_MMP configuration option for Marvell PXA1908 SoC.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
arch/arm64/Kconfig.platforms | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 24335565bad5..d71b0b6e75aa 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -168,6 +168,14 @@ config ARCH_MESON
This enables support for the arm64 based Amlogic SoCs
such as the s905, S905X/D, S912, A113X/D or S905X/D2
+config ARCH_MMP
+ bool "Marvell MMP SoC Family"
+ select PINCTRL
+ select PINCTRL_SINGLE
+ help
+ This enables support for Marvell MMP SoC family, currently
+ supporting PXA1908 aka IAP140.
+
config ARCH_MVEBU
bool "Marvell EBU SoC Family"
select ARMADA_AP806_SYSCON
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 11/12] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (9 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 12/12] MAINTAINERS: add myself as Marvell PXA1908 maintainer Duje Mihanović
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value
Edition LTE, a smartphone based on said SoC.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
arch/arm64/boot/dts/marvell/Makefile | 3 +
.../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 328 +++++++++++++++++++++
arch/arm64/boot/dts/marvell/pxa1908.dtsi | 300 +++++++++++++++++++
3 files changed, 631 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 99b8cb3c49e1..687c256d95fe 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -28,3 +28,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
+
+# MMP SoC Family
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 000000000000..2a1f309c8e54
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ model = "Samsung Galaxy Core Prime VE LTE";
+ compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+ aliases {
+ mmc0 = &sdh2; /* eMMC */
+ mmc1 = &sdh0; /* SD card */
+ serial0 = &uart0;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0:115200n8";
+
+ /* S-Boot places the initramfs here */
+ linux,initrd-start = <0x4d70000>;
+ linux,initrd-end = <0x5000000>;
+
+ fb0: framebuffer@17177000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x17177000 0 (480 * 800 * 4)>;
+ width = <480>;
+ height = <800>;
+ stride = <(480 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ /* Bootloader fills this in */
+ memory {
+ device_type = "memory";
+ reg = <0 0 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer@17000000 {
+ reg = <0 0x17000000 0 0x1800000>;
+ no-map;
+ };
+
+ gpu@9000000 {
+ reg = <0 0x9000000 0 0x1000000>;
+ };
+
+ /* Communications processor, aka modem */
+ cp@5000000 {
+ reg = <0 0x5000000 0 0x3000000>;
+ };
+
+ cm3@a000000 {
+ reg = <0 0xa000000 0 0x80000>;
+ };
+
+ seclog@8000000 {
+ reg = <0 0x8000000 0 0x100000>;
+ };
+
+ ramoops@8100000 {
+ compatible = "ramoops";
+ reg = <0 0x8100000 0 0x40000>;
+ record-size = <0x8000>;
+ console-size = <0x20000>;
+ max-reason = <5>;
+ };
+ };
+
+
+ i2c-muic {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <3>;
+ i2c-gpio,timeout-ms = <100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_muic_pins>;
+
+ muic: extcon@14 {
+ compatible = "siliconmitus,sm5504-muic";
+ reg = <0x14>;
+ interrupt-parent = <&gpio>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+ autorepeat;
+
+ key-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+ };
+
+ key-volup {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ key-voldown {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&smmu {
+ status = "okay";
+};
+
+&pmx {
+ pinctrl-single,gpio-range = <&range 55 55 0>,
+ <&range 110 32 0>,
+ <&range 52 1 0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&board_pins_0 &board_pins_1 &board_pins_2>;
+
+ board_pins_0: board-pins-0 {
+ pinctrl-single,pins = <
+ 0x160 0
+ 0x164 0
+ 0x168 0
+ 0x16c 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0x288 0x388>;
+ };
+
+ board_pins_1: board-pins-1 {
+ pinctrl-single,pins = <
+ 0x44 1
+ 0x48 1
+ 0x20 1
+ 0x18 1
+ 0x14 1
+ 0x10 1
+ 0xc 1
+ 0x8 1
+ 0x68 1
+ 0x58 0
+ 0x54 0
+ 0x7c 0
+ 0x6c 0
+ 0x70 0
+ 0x4c 1
+ 0x50 1
+ 0xac 0
+ 0x90 0
+ 0x8c 0
+ 0x88 0
+ 0x84 0
+ 0xc8 0
+ 0x128 0
+ 0x190 0
+ 0x194 0
+ 0x1a0 0
+ 0x114 0
+ 0x118 0
+ 0x1d8 0
+ 0x1e4 0
+ 0xe8 0
+ 0x100 0
+ 0x204 0
+ 0x210 0
+ 0x218 0
+ >;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+ pinctrl-single,low-power-mode = <0x288 0x388>;
+ };
+
+ board_pins_2: board-pins-2 {
+ pinctrl-single,pins = <
+ 0x260 0
+ 0x264 0
+ 0x268 0
+ 0x26c 0
+ 0x270 0
+ 0x274 0
+ 0x78 0
+ 0x74 0
+ 0xb0 1
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ uart0_pins: uart0-pins {
+ pinctrl-single,pins = <
+ 0x198 6
+ 0x19c 6
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ gpio_keys_pins: gpio-keys-pins {
+ pinctrl-single,pins = <
+ 0x11c 0
+ 0x120 0
+ 0x1a4 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ i2c_muic_pins: i2c-muic-pins {
+ pinctrl-single,pins = <
+ 0x154 0
+ 0x150 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0x288 0x388>;
+ };
+
+ sdh0_pins_0: sdh0-pins-0 {
+ pinctrl-single,pins = <
+ 0x108 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ sdh0_pins_1: sdh0-pins-1 {
+ pinctrl-single,pins = <
+ 0x94 0
+ 0x98 0
+ 0x9c 0
+ 0xa0 0
+ 0xa4 0
+ >;
+ pinctrl-single,drive-strength = <0x800 0x1800>;
+ pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0 0x388>;
+ };
+
+ sdh0_pins_2: sdh0-pins-2 {
+ pinctrl-single,pins = <
+ 0xa8 0
+ >;
+ pinctrl-single,drive-strength = <0x1000 0x1800>;
+ pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+ pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+ pinctrl-single,input-schmitt = <0x40 0 0x40 0x70>;
+ pinctrl-single,low-power-mode = <0x208 0x388>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+ status = "okay";
+};
+
+&twsi1 {
+ status = "okay";
+};
+
+&twsi2 {
+ status = "okay";
+};
+
+&twsi3 {
+ status = "okay";
+};
+
+&usb {
+ extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+ /* Disabled for now because initialization fails with -ETIMEDOUT. */
+ status = "disabled";
+ bus-width = <8>;
+ non-removable;
+ mmc-ddr-1_8v;
+};
+
+&sdh0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>;
+ cd-gpios = <&gpio 11 0>;
+ cd-inverted;
+ bus-width = <4>;
+ wp-inverted;
+};
diff --git a/arch/arm64/boot/dts/marvell/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
new file mode 100644
index 000000000000..cf2b9109688c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+ model = "Marvell Armada PXA1908";
+ compatible = "marvell,pxa1908";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0 3>;
+ enable-method = "psci";
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ smmu: iommu@c0010000 {
+ compatible = "arm,mmu-400";
+ reg = <0 0xc0010000 0 0x10000>;
+ #global-interrupts = <1>;
+ #iommu-cells = <1>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@d1df9000 {
+ compatible = "arm,gic-400";
+ reg = <0 0xd1df9000 0 0x1000>,
+ <0 0xd1dfa000 0 0x2000>,
+ /* The subsequent registers are guesses. */
+ <0 0xd1dfc000 0 0x2000>,
+ <0 0xd1dfe000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ apb@d4000000 {
+ compatible = "simple-bus";
+ reg = <0 0xd4000000 0 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xd4000000 0x200000>;
+
+ pdma: dma-controller@0 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0 0x10000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <30>;
+ #dma-cells = <2>;
+ };
+
+ twsi1: i2c@10800 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10800 0x64>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_TWSI1>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi0: i2c@11000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11000 0x64>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_TWSI0>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi3: i2c@13800 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x13800 0x64>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_TWSI3>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ apbc: clock-controller@15000 {
+ compatible = "marvell,pxa1908-apbc";
+ reg = <0x15000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@17000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+ reg = <0x17000 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_UART0>;
+ reg-shift = <2>;
+ };
+
+ uart1: serial@18000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+ reg = <0x18000 0x1000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbc PXA1908_CLK_UART1>;
+ reg-shift = <2>;
+ };
+
+ gpio: gpio@19000 {
+ compatible = "marvell,mmp-gpio";
+ reg = <0x19000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&apbc PXA1908_CLK_GPIO>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ranges = <0 0x19000 0x800>;
+
+ gpio@0 {
+ reg = <0x0 0x4>;
+ };
+
+ gpio@4 {
+ reg = <0x4 0x4>;
+ };
+
+ gpio@8 {
+ reg = <0x8 0x4>;
+ };
+
+ gpio@100 {
+ reg = <0x100 0x4>;
+ };
+ };
+
+ pmx: pinmux@1e000 {
+ compatible = "marvell,pxa1908-padconf", "pinconf-single";
+ reg = <0x1e000 0x330>;
+
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ uart2: serial@36000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+ reg = <0x36000 0x1000>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbcp PXA1908_CLK_UART2>;
+ reg-shift = <2>;
+ };
+
+ twsi2: i2c@37000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x37000 0x64>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apbcp PXA1908_CLK_TWSI2>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ apbcp: clock-controller@3b000 {
+ compatible = "marvell,pxa1908-apbcp";
+ reg = <0x3b000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mpmu: clock-controller@50000 {
+ compatible = "marvell,pxa1908-mpmu";
+ reg = <0x50000 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ axi@d4200000 {
+ compatible = "simple-bus";
+ reg = <0 0xd4200000 0 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xd4200000 0x200000>;
+
+ usbphy: phy@7000 {
+ compatible = "marvell,pxa1928-usb-phy";
+ reg = <0x7000 0x200>;
+ clocks = <&apmu PXA1908_CLK_USB>;
+ #phy-cells = <0>;
+ };
+
+ usb: usb@8000 {
+ compatible = "chipidea,usb2";
+ reg = <0x8000 0x200>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_USB>;
+ phys = <&usbphy>;
+ phy-names = "usb-phy";
+ };
+
+ sdh0: mmc@80000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0x80000 0x120>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_SDH0>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <31>;
+ };
+
+ sdh1: mmc@80800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0x80800 0x120>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_SDH1>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <31>;
+ };
+
+ sdh2: mmc@81000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0x81000 0x120>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apmu PXA1908_CLK_SDH2>;
+ clock-names = "io";
+ mrvl,clk-delay-cycles = <31>;
+ };
+
+ apmu: clock-controller@82800 {
+ compatible = "marvell,pxa1908-apmu";
+ reg = <0x82800 0x400>;
+ #clock-cells = <1>;
+ };
+ };
+ };
+};
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v10 12/12] MAINTAINERS: add myself as Marvell PXA1908 maintainer
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
` (10 preceding siblings ...)
2024-04-24 18:42 ` [PATCH v10 11/12] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte Duje Mihanović
@ 2024-04-24 18:42 ` Duje Mihanović
11 siblings, 0 replies; 13+ messages in thread
From: Duje Mihanović @ 2024-04-24 18:42 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Tony Lindgren, Haojian Zhuang,
Duje Mihanović, Lubomir Rintel, Catalin Marinas, Will Deacon,
Kees Cook, Tony Luck, Guilherme G. Piccoli, Rob Herring
Cc: phone-devel, ~postmarketos/upstreaming, Karel Balej, David Wronek,
linux-clk, linux-kernel, linux-gpio, devicetree, linux-arm-kernel
Add myself as the maintainer for Marvell PXA1908 SoC support.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index ebf03f5f0619..5d48ac9801df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2370,6 +2370,15 @@ F: drivers/irqchip/irq-mvebu-*
F: drivers/pinctrl/mvebu/
F: drivers/rtc/rtc-armada38x.c
+ARM/Marvell PXA1908 SOC support
+M: Duje Mihanović <duje.mihanovic@skole.hr>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+T: git https://gitlab.com/LegoLivesMatter/linux
+F: arch/arm64/boot/dts/marvell/pxa1908*
+F: drivers/clk/mmp/clk-pxa1908*.c
+F: include/dt-bindings/clock/marvell,pxa1908.h
+
ARM/Mediatek RTC DRIVER
M: Eddie Huang <eddie.huang@mediatek.com>
M: Sean Wang <sean.wang@mediatek.com>
--
2.44.0
^ permalink raw reply related [flat|nested] 13+ messages in thread
end of thread, other threads:[~2024-04-24 18:42 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-24 18:42 [PATCH v10 00/12] Initial Marvell PXA1908 support Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 01/12] clk: mmp: Switch to use struct u32_fract instead of custom one Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 02/12] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 03/12] pinctrl: single: " Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 05/12] clk: mmp: Add Marvell PXA1908 APBC driver Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 06/12] clk: mmp: Add Marvell PXA1908 APBCP driver Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 07/12] clk: mmp: Add Marvell PXA1908 APMU driver Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 08/12] clk: mmp: Add Marvell PXA1908 MPMU driver Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 09/12] dt-bindings: marvell: Document PXA1908 SoC Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 11/12] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte Duje Mihanović
2024-04-24 18:42 ` [PATCH v10 12/12] MAINTAINERS: add myself as Marvell PXA1908 maintainer Duje Mihanović
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).