From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
To: Thomas Bonnefille <thomas.bonnefille@bootlin.com>,
jszhang@kernel.org, guoren@kernel.org, wefu@redhat.com,
andi.shyti@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: miquel.raynal@bootlin.com, thomas.petazzoni@bootlin.com,
linux-riscv@lists.infradead.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu
Subject: Re: [PATCH 3/4] riscv: dts: thead: Add TH1520 I2C nodes
Date: Mon, 29 Apr 2024 09:35:10 -0400 [thread overview]
Message-ID: <CAJM55Z-3rjs8m4Dt6DVEv-5XfKUgRedY1p=BaPPdDG2_fh3AUg@mail.gmail.com> (raw)
In-Reply-To: <20240425082138.374445-4-thomas.bonnefille@bootlin.com>
Thomas Bonnefille wrote:
> Add nodes for the five I2C on the T-Head TH1520 RISCV SoC.
> All the I2C nodes are fed with the same clock named i2c_ic_clk.
> As there is currently no clock support, the i2c_ic_clk is exposed
> through a fixed-clock to mimic the existing nodes.
>
Thanks!
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
> ---
> arch/riscv/boot/dts/thead/th1520.dtsi | 66 +++++++++++++++++++++++++++
> 1 file changed, 66 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index d2fa25839012..86ae507576dc 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -153,6 +153,12 @@ sdhci_clk: sdhci-clock {
> #clock-cells = <0>;
> };
>
> + i2c_ic_clk: i2c-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <50000000>;
> + #clock-cells = <0>;
> + };
> +
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&plic>;
> @@ -258,6 +264,36 @@ portc: gpio-controller@0 {
> };
> };
>
> + i2c0: i2c@ffe7f20000 {
> + compatible = "thead,th1520-i2c", "snps,designware-i2c";
> + reg = <0xff 0xe7f20000 0x0 0x4000>;
> + interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&i2c_ic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@ffe7f24000 {
> + compatible = "thead,th1520-i2c", "snps,designware-i2c";
> + reg = <0xff 0xe7f24000 0x0 0x4000>;
> + interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&i2c_ic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@ffe7f28000 {
> + compatible = "thead,th1520-i2c", "snps,designware-i2c";
> + reg = <0xff 0xe7f28000 0x0 0x4000>;
> + interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&i2c_ic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> gpio3: gpio@ffe7f38000 {
> compatible = "snps,dw-apb-gpio";
> reg = <0xff 0xe7f38000 0x0 0x1000>;
> @@ -312,6 +348,16 @@ portb: gpio-controller@0 {
> };
> };
>
> + i2c2: i2c@ffec00c000 {
> + compatible = "thead,th1520-i2c", "snps,designware-i2c";
> + reg = <0xff 0xec00c000 0x0 0x4000>;
> + interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&i2c_ic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> uart2: serial@ffec010000 {
> compatible = "snps,dw-apb-uart";
> reg = <0xff 0xec010000 0x0 0x4000>;
> @@ -322,6 +368,16 @@ uart2: serial@ffec010000 {
> status = "disabled";
> };
>
> + i2c3: i2c@ffec014000 {
> + compatible = "thead,th1520-i2c", "snps,designware-i2c";
> + reg = <0xff 0xec014000 0x0 0x4000>;
> + interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&i2c_ic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> dmac0: dma-controller@ffefc00000 {
> compatible = "snps,axi-dma-1.01a";
> reg = <0xff 0xefc00000 0x0 0x1000>;
> @@ -394,6 +450,16 @@ uart5: serial@fff7f0c000 {
> status = "disabled";
> };
>
> + i2c5: i2c@fff7f2c000 {
> + compatible = "thead,th1520-i2c", "snps,designware-i2c";
> + reg = <0xff 0xf7f2c000 0x0 0x4000>;
> + interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&i2c_ic_clk>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> timer4: timer@ffffc33000 {
> compatible = "snps,dw-apb-timer";
> reg = <0xff 0xffc33000 0x0 0x14>;
> --
> 2.44.0
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-04-29 13:35 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-25 8:21 [PATCH 0/4] Add I2C support on TH1520 Thomas Bonnefille
2024-04-25 8:21 ` [PATCH 1/4] dt-bindings: i2c: dw: Document compatible thead,th1520-i2c Thomas Bonnefille
2024-04-25 9:48 ` Krzysztof Kozlowski
2024-04-25 8:21 ` [PATCH 2/4] riscv: boot: dts: thead: Fix node ordering in TH1520 device tree Thomas Bonnefille
2024-04-25 9:49 ` Krzysztof Kozlowski
2024-04-25 16:39 ` Conor Dooley
2024-04-25 8:21 ` [PATCH 3/4] riscv: dts: thead: Add TH1520 I2C nodes Thomas Bonnefille
2024-04-29 13:35 ` Emil Renner Berthing [this message]
2024-04-25 8:21 ` [PATCH 4/4] riscv: dts: thead: Enable I2C on the BeagleV-Ahead Thomas Bonnefille
2024-04-29 13:38 ` Emil Renner Berthing
2024-04-25 9:00 ` [PATCH 0/4] Add I2C support on TH1520 Conor Dooley
2024-04-25 9:42 ` Thomas Bonnefille
2024-04-25 15:10 ` Drew Fustini
2024-04-25 14:51 ` Rob Herring
2024-04-25 16:35 ` Conor Dooley
2024-04-26 14:12 ` Thomas Bonnefille
2024-04-26 14:42 ` Conor Dooley
2024-04-29 13:07 ` Thomas Bonnefille
2024-04-29 13:24 ` Conor Dooley
2024-04-25 16:37 ` (subset) " Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJM55Z-3rjs8m4Dt6DVEv-5XfKUgRedY1p=BaPPdDG2_fh3AUg@mail.gmail.com' \
--to=emil.renner.berthing@canonical.com \
--cc=andi.shyti@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=guoren@kernel.org \
--cc=jszhang@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=thomas.bonnefille@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).