From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
linux-mtd@lists.infradead.org
Cc: Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org, Josh Wu <josh.wu@atmel.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-sunxi@googlegroups.com, Stefan Agner <stefan@agner.ch>,
Kyungmin Park <kyungmin.park@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
punnaiah choudary kalluri <punnaia@xilinx.com>,
Priit Laes <plaes@plaes.org>,
Boris Brezillon <boris.brezillon@free-electrons.com>
Subject: [PATCH v2 46/51] mtd: nand: sunxi: switch to mtd_ooblayout_ops
Date: Thu, 4 Feb 2016 11:07:09 +0100 [thread overview]
Message-ID: <1454580434-32078-47-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1454580434-32078-1-git-send-email-boris.brezillon@free-electrons.com>
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/sunxi_nand.c | 114 +++++++++++++++++++-----------------------
1 file changed, 52 insertions(+), 62 deletions(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index b5ea6b3..a32a894 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -212,12 +212,9 @@ struct sunxi_nand_chip_sel {
* sunxi HW ECC infos: stores information related to HW ECC support
*
* @mode: the sunxi ECC mode field deduced from ECC requirements
- * @layout: the OOB layout depending on the ECC requirements and the
- * selected ECC mode
*/
struct sunxi_nand_hw_ecc {
int mode;
- struct nand_ecclayout layout;
};
/*
@@ -1257,6 +1254,57 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
return sunxi_nand_chip_set_timings(chip, timings);
}
+static int sunxi_nand_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+ if (section >= ecc->steps)
+ return -ERANGE;
+
+ oobregion->offset = section * (ecc->bytes + 4) + 4;
+ oobregion->length = ecc->bytes;
+
+ return 0;
+}
+
+static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+
+ if (section > ecc->steps)
+ return -ERANGE;
+
+ /*
+ * The first 2 bytes are used for BB markers, hence we
+ * only have 2 bytes available in the first user data
+ * section.
+ */
+ if (!section && ecc->mode == NAND_ECC_HW) {
+ oobregion->offset = 2;
+ oobregion->length = 2;
+
+ return 0;
+ }
+
+ oobregion->offset = section * (ecc->bytes + 4);
+
+ if (section < ecc->steps)
+ oobregion->length = 4;
+ else
+ oobregion->offset = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops sunxi_nand_ooblayout_ops = {
+ .ecc = sunxi_nand_ooblayout_ecc,
+ .free = sunxi_nand_ooblayout_free,
+};
+
static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
@@ -1266,7 +1314,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
struct sunxi_nand_hw_ecc *data;
- struct nand_ecclayout *layout;
int nsectors;
int ret;
int i;
@@ -1295,7 +1342,6 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
/* HW ECC always work with even numbers of ECC bytes */
ecc->bytes = ALIGN(ecc->bytes, 2);
- layout = &data->layout;
nsectors = mtd->writesize / ecc->size;
if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) {
@@ -1303,9 +1349,7 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
goto err;
}
- layout->eccbytes = (ecc->bytes * nsectors);
-
- ecc->layout = layout;
+ mtd_set_ooblayout(mtd, &sunxi_nand_ooblayout_ops);
ecc->priv = data;
return 0;
@@ -1325,9 +1369,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
{
- struct nand_ecclayout *layout;
- int nsectors;
- int i, j;
int ret;
ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1336,40 +1377,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
ecc->read_page = sunxi_nfc_hw_ecc_read_page;
ecc->write_page = sunxi_nfc_hw_ecc_write_page;
- layout = ecc->layout;
- nsectors = mtd->writesize / ecc->size;
-
- for (i = 0; i < nsectors; i++) {
- if (i) {
- layout->oobfree[i].offset =
- layout->oobfree[i - 1].offset +
- layout->oobfree[i - 1].length +
- ecc->bytes;
- layout->oobfree[i].length = 4;
- } else {
- /*
- * The first 2 bytes are used for BB markers, hence we
- * only have 2 bytes available in the first user data
- * section.
- */
- layout->oobfree[i].length = 2;
- layout->oobfree[i].offset = 2;
- }
-
- for (j = 0; j < ecc->bytes; j++)
- layout->eccpos[(ecc->bytes * i) + j] =
- layout->oobfree[i].offset +
- layout->oobfree[i].length + j;
- }
-
- if (mtd->oobsize > (ecc->bytes + 4) * nsectors) {
- layout->oobfree[nsectors].offset =
- layout->oobfree[nsectors - 1].offset +
- layout->oobfree[nsectors - 1].length +
- ecc->bytes;
- layout->oobfree[nsectors].length = mtd->oobsize -
- ((ecc->bytes + 4) * nsectors);
- }
return 0;
}
@@ -1378,9 +1385,6 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc,
struct device_node *np)
{
- struct nand_ecclayout *layout;
- int nsectors;
- int i;
int ret;
ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
@@ -1391,15 +1395,6 @@ static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page;
ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page;
- layout = ecc->layout;
- nsectors = mtd->writesize / ecc->size;
-
- for (i = 0; i < (ecc->bytes * nsectors); i++)
- layout->eccpos[i] = i;
-
- layout->oobfree[0].length = mtd->oobsize - i;
- layout->oobfree[0].offset = i;
-
return 0;
}
@@ -1411,7 +1406,6 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc);
break;
case NAND_ECC_NONE:
- kfree(ecc->layout);
default:
break;
}
@@ -1445,10 +1439,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
return ret;
break;
case NAND_ECC_NONE:
- ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL);
- if (!ecc->layout)
- return -ENOMEM;
- ecc->layout->oobfree[0].length = mtd->oobsize;
case NAND_ECC_SOFT:
break;
default:
--
2.1.4
next prev parent reply other threads:[~2016-02-04 10:08 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 10:06 [PATCH v2 00/51] mtd: rework ECC layout definition Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 01/51] mtd: kill the ecclayout->oobavail field Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 02/51] mtd: create an mtd_oobavail() helper and make use of it Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 03/51] mtd: mtdswap: remove useless if (!mtd->ecclayout) test Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 04/51] mtd: nand: simplify nand_bch_init() usage Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon
2016-02-05 7:35 ` Boris Brezillon
2016-02-05 9:27 ` Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 06/51] mtd: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 07/51] mtd: nand: core: " Boris Brezillon
2016-02-05 9:31 ` Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 08/51] mtd: nand: atmel: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 09/51] mtd: nand: fsl_ifc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 10/51] mtd: nand: gpmi: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 11/51] mtd: nand: lpc32xx: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 12/51] mtd: nand: omap2: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 13/51] mtd: onenand: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 14/51] mtd: add mtd_set_ecclayout() helper function Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 15/51] mtd: use mtd_set_ecclayout() where appropriate Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 16/51] mtd: nand: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 17/51] mtd: onenand: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 18/51] mtd: docg3: " Boris Brezillon
2016-02-06 21:55 ` Robert Jarzmik
2016-02-04 10:06 ` [PATCH v2 19/51] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 20/51] mtd: docg3: switch to mtd_ooblayout_ops Boris Brezillon
2016-02-06 21:57 ` Robert Jarzmik
2016-02-04 10:06 ` [PATCH v2 21/51] mtd: nand: implement the default mtd_ooblayout_ops Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 22/51] mtd: nand: bch: switch to mtd_ooblayout_ops Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 23/51] mtd: nand: sharpsl: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 24/51] mtd: nand: jz4740: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 25/51] mtd: nand: atmel: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 26/51] mtd: nand: bf5xx: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 27/51] mtd: nand: brcm: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 28/51] mtd: nand: cafe: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 29/51] mtd: nand: davinci: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 30/51] mtd: nand: denali: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 31/51] mtd: nand: diskonchip: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 32/51] mtd: nand: docg4: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 33/51] mtd: nand: fsl_elbc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 34/51] mtd: nand: fsl_ifc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 35/51] mtd: nand: fsmc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 36/51] mtd: nand: gpmi: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 37/51] mtd: nand: hisi504: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 38/51] mtd: nand: jz4780: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 39/51] mtd: nand: lpc32xx: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 40/51] mtd: nand: mxc: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 41/51] mtd: nand: omap2: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 42/51] mtd: nand: pxa3xx: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 43/51] mtd: nand: s3c2410: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 44/51] mtd: nand: sh_flctl: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 45/51] mtd: nand: sm_common: " Boris Brezillon
2016-02-04 10:07 ` Boris Brezillon [this message]
2016-02-04 10:07 ` [PATCH v2 47/51] mtd: nand: vf610: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 48/51] mtd: onenand: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 49/51] staging: mt29f_spinand: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 50/51] mtd: nand: kill the ecc->layout field Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 51/51] mtd: kill the nand_ecclayout struct Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454580434-32078-47-git-send-email-boris.brezillon@free-electrons.com \
--to=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=daniel@zonque.org \
--cc=devel@driverdev.osuosl.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=josh.wu@atmel.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=plaes@plaes.org \
--cc=punnaia@xilinx.com \
--cc=ralf@linux-mips.org \
--cc=robert.jarzmik@free.fr \
--cc=stefan@agner.ch \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).