From: Boris Brezillon <boris.brezillon@free-electrons.com>
To: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
linux-mtd@lists.infradead.org
Cc: Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org, Josh Wu <josh.wu@atmel.com>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-sunxi@googlegroups.com, Stefan Agner <stefan@agner.ch>,
Kyungmin Park <kyungmin.park@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
punnaiah choudary kalluri <punnaia@xilinx.com>,
Priit Laes <plaes@plaes.org>,
Boris Brezillon <boris.brezillon@free-electrons.com>
Subject: [PATCH v2 08/51] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate
Date: Thu, 4 Feb 2016 11:06:31 +0100 [thread overview]
Message-ID: <1454580434-32078-9-git-send-email-boris.brezillon@free-electrons.com> (raw)
In-Reply-To: <1454580434-32078-1-git-send-email-boris.brezillon@free-electrons.com>
The mtd_ooblayout_xxx() helper functions have been added to avoid direct
accesses to the ecclayout field, and thus ease for future reworks.
Use these helpers in all places where the oobfree[] and eccpos[] arrays
where directly accessed.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/atmel_nand.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index affe7a7..9dde308 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -828,13 +828,16 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, *(buf + byte_pos));
} else {
+ struct mtd_oob_region oobregion;
+
/* Bit flip in OOB area */
tmp = sector_num * nand_chip->ecc.bytes
+ (byte_pos - sector_size);
err_byte = ecc[tmp];
ecc[tmp] ^= (1 << bit_pos);
- pos = tmp + nand_chip->ecc.layout->eccpos[0];
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ pos = tmp + oobregion.offset;
dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, ecc[tmp]);
}
@@ -923,7 +926,6 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
struct atmel_nand_host *host = nand_get_controller_data(chip);
int eccsize = chip->ecc.size * chip->ecc.steps;
uint8_t *oob = chip->oob_poi;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint32_t stat;
unsigned long end_time;
int bitflips = 0;
@@ -945,7 +947,11 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
stat = pmecc_readl_relaxed(host->ecc, ISR);
if (stat != 0) {
- bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+ struct mtd_oob_region oobregion;
+
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ bitflips = pmecc_correction(mtd, stat, buf,
+ &oob[oobregion.offset]);
if (bitflips < 0)
/* uncorrectable errors */
return 0;
@@ -959,8 +965,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
int page)
{
struct atmel_nand_host *host = nand_get_controller_data(chip);
- uint32_t *eccpos = chip->ecc.layout->eccpos;
- int i, j;
+ struct mtd_oob_region oobregion = { };
+ int i, j, section = 0;
unsigned long end_time;
if (!host->nfc || !host->nfc->write_by_sram) {
@@ -979,11 +985,12 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
for (i = 0; i < chip->ecc.steps; i++) {
for (j = 0; j < chip->ecc.bytes; j++) {
- int pos;
+ if (!oobregion.length)
+ mtd_ooblayout_ecc(mtd, section++, &oobregion);
- pos = i * chip->ecc.bytes + j;
- chip->oob_poi[eccpos[pos]] =
+ chip->oob_poi[oobregion.offset++] =
pmecc_readb_ecc_relaxed(host->ecc, i, j);
+ oobregion.length--;
}
}
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -997,6 +1004,7 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
uint32_t val = 0;
struct nand_ecclayout *ecc_layout;
+ struct mtd_oob_region oobregion;
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
@@ -1045,9 +1053,10 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
ecc_layout = nand_chip->ecc.layout;
pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
- pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ pmecc_writel(host->ecc, SADDR, oobregion.offset);
pmecc_writel(host->ecc, EADDR,
- ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+ oobregion.offset + ecc_layout->eccbytes - 1);
/* See datasheet about PMECC Clock Control Register */
pmecc_writel(host->ecc, CLK, 2);
pmecc_writel(host->ecc, IDR, 0xff);
@@ -1341,12 +1350,12 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
{
int eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint8_t *p = buf;
uint8_t *oob = chip->oob_poi;
uint8_t *ecc_pos;
int stat;
unsigned int max_bitflips = 0;
+ struct mtd_oob_region oobregion = {};
/*
* Errata: ALE is incorrectly wired up to the ECC controller
@@ -1364,7 +1373,8 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
chip->read_buf(mtd, p, eccsize);
/* move to ECC position if needed */
- if (eccpos[0] != 0) {
+ mtd_ooblayout_ecc(mtd, 0, &oobregion);
+ if (oobregion.offset != 0) {
/* This only works on large pages
* because the ECC controller waits for
* NAND_CMD_RNDOUTSTART after the
@@ -1372,11 +1382,11 @@ static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
* anyway, for small pages, the eccpos[0] == 0
*/
chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
- mtd->writesize + eccpos[0], -1);
+ mtd->writesize + oobregion.offset, -1);
}
/* the ECC controller needs to read the ECC just after the data */
- ecc_pos = oob + eccpos[0];
+ ecc_pos = oob + oobregion.offset;
chip->read_buf(mtd, ecc_pos, eccbytes);
/* check if there's an error */
--
2.1.4
next prev parent reply other threads:[~2016-02-04 10:28 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 10:06 [PATCH v2 00/51] mtd: rework ECC layout definition Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 01/51] mtd: kill the ecclayout->oobavail field Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 02/51] mtd: create an mtd_oobavail() helper and make use of it Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 03/51] mtd: mtdswap: remove useless if (!mtd->ecclayout) test Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 04/51] mtd: nand: simplify nand_bch_init() usage Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions Boris Brezillon
2016-02-05 7:35 ` Boris Brezillon
2016-02-05 9:27 ` Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 06/51] mtd: use mtd_ooblayout_xxx() helpers where appropriate Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 07/51] mtd: nand: core: " Boris Brezillon
2016-02-05 9:31 ` Boris Brezillon
2016-02-04 10:06 ` Boris Brezillon [this message]
2016-02-04 10:06 ` [PATCH v2 09/51] mtd: nand: fsl_ifc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 10/51] mtd: nand: gpmi: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 11/51] mtd: nand: lpc32xx: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 12/51] mtd: nand: omap2: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 13/51] mtd: onenand: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 14/51] mtd: add mtd_set_ecclayout() helper function Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 15/51] mtd: use mtd_set_ecclayout() where appropriate Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 16/51] mtd: nand: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 17/51] mtd: onenand: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 18/51] mtd: docg3: " Boris Brezillon
2016-02-06 21:55 ` Robert Jarzmik
2016-02-04 10:06 ` [PATCH v2 19/51] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 20/51] mtd: docg3: switch to mtd_ooblayout_ops Boris Brezillon
2016-02-06 21:57 ` Robert Jarzmik
2016-02-04 10:06 ` [PATCH v2 21/51] mtd: nand: implement the default mtd_ooblayout_ops Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 22/51] mtd: nand: bch: switch to mtd_ooblayout_ops Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 23/51] mtd: nand: sharpsl: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 24/51] mtd: nand: jz4740: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 25/51] mtd: nand: atmel: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 26/51] mtd: nand: bf5xx: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 27/51] mtd: nand: brcm: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 28/51] mtd: nand: cafe: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 29/51] mtd: nand: davinci: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 30/51] mtd: nand: denali: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 31/51] mtd: nand: diskonchip: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 32/51] mtd: nand: docg4: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 33/51] mtd: nand: fsl_elbc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 34/51] mtd: nand: fsl_ifc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 35/51] mtd: nand: fsmc: " Boris Brezillon
2016-02-04 10:06 ` [PATCH v2 36/51] mtd: nand: gpmi: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 37/51] mtd: nand: hisi504: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 38/51] mtd: nand: jz4780: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 39/51] mtd: nand: lpc32xx: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 40/51] mtd: nand: mxc: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 41/51] mtd: nand: omap2: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 42/51] mtd: nand: pxa3xx: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 43/51] mtd: nand: s3c2410: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 44/51] mtd: nand: sh_flctl: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 45/51] mtd: nand: sm_common: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 46/51] mtd: nand: sunxi: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 47/51] mtd: nand: vf610: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 48/51] mtd: onenand: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 49/51] staging: mt29f_spinand: " Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 50/51] mtd: nand: kill the ecc->layout field Boris Brezillon
2016-02-04 10:07 ` [PATCH v2 51/51] mtd: kill the nand_ecclayout struct Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454580434-32078-9-git-send-email-boris.brezillon@free-electrons.com \
--to=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=daniel@zonque.org \
--cc=devel@driverdev.osuosl.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=josh.wu@atmel.com \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=plaes@plaes.org \
--cc=punnaia@xilinx.com \
--cc=ralf@linux-mips.org \
--cc=robert.jarzmik@free.fr \
--cc=stefan@agner.ch \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).