From: Wenyou Yang <wenyou.yang@atmel.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
Mark Brown <broonie@kernel.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>
Cc: Javier Martinez Canillas <javier@dowhile0.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Peter Korsgaard <jacmet@gmail.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Wenyou Yang <wenyou.yang@atmel.com>
Subject: [PATCH v10 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver
Date: Fri, 5 Feb 2016 11:36:29 +0800 [thread overview]
Message-ID: <1454643390-16910-2-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1454643390-16910-1-git-send-email-wenyou.yang@atmel.com>
This patch adds support for the Active-semi ACT8945A PMIC.
It is a Multi Function Device with the following subdevices:
- Regulator
- Charger
It is interfaced to the host controller using I2C interface,
ACT8945A is a child device of the I2C.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
---
Changes in v10:
- remove the mfd cell .of_compatible.
Changes in v9:
- remove unneeded struct act8945a_dev structure.
- collect Acked from Lee.
- collect Acked from Peter.
Changes in v8:
- change the subdevice's name "act8945a-pmic" to "act8945a-regulator".
Changes in v7:
- remove struct act8945a_dev to .c file.
- remove unused .h file.
Changes in v6:
- change MFD_ACT8945A type from bool to tristate.
- revert depends on to 'I2C'.
Changes in v5:
- change depends on to 'I2C=y'.
Changes in v4:
- add a space before .compatible.
- collect Reviewed-by from Krzysztof Kozlowski.
Changes in v3: None
Changes in v2:
- add more help information in Kconfig.
- update the file header with short version license and author line.
- remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
- use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
- use more explicit info to indicate the failure to add sub devices.
- remove the unnecessary print out.
- substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
drivers/mfd/Kconfig | 11 ++++++
drivers/mfd/Makefile | 1 +
drivers/mfd/act8945a.c | 102 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 114 insertions(+)
create mode 100644 drivers/mfd/act8945a.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6c4ebd9..38994bb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -18,6 +18,17 @@ config MFD_CS5535
This is the core driver for CS5535/CS5536 MFD functions. This is
necessary for using the board's GPIO and MFGPT functionality.
+config MFD_ACT8945A
+ tristate "Active-semi ACT8945A"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C && OF
+ help
+ Support for the ACT8945A PMIC from Active-semi. This device
+ features three step-down DC/DC converters and four low-dropout
+ linear regulators, along with a complete ActivePath battery
+ charger.
+
config MFD_AS3711
bool "AMS AS3711"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..2f1ca82 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
+obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
new file mode 100644
index 0000000..525b546
--- /dev/null
+++ b/drivers/mfd/act8945a.c
@@ -0,0 +1,102 @@
+/*
+ * MFD driver for Active-semi ACT8945a PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation.
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell act8945a_devs[] = {
+ {
+ .name = "act8945a-regulator",
+ },
+ {
+ .name = "act8945a-charger",
+ },
+};
+
+static const struct regmap_config act8945a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int act8945a_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ i2c_set_clientdata(i2c, regmap);
+
+ ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs,
+ ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add sub devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int act8945a_i2c_remove(struct i2c_client *i2c)
+{
+ mfd_remove_devices(&i2c->dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id act8945a_i2c_id[] = {
+ { "act8945a", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
+
+static const struct of_device_id act8945a_of_match[] = {
+ { .compatible = "active-semi,act8945a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, act8945a_of_match);
+
+static struct i2c_driver act8945a_i2c_driver = {
+ .driver = {
+ .name = "act8945a",
+ .of_match_table = of_match_ptr(act8945a_of_match),
+ },
+ .probe = act8945a_i2c_probe,
+ .remove = act8945a_i2c_remove,
+ .id_table = act8945a_i2c_id,
+};
+
+static int __init act8945a_i2c_init(void)
+{
+ return i2c_add_driver(&act8945a_i2c_driver);
+}
+subsys_initcall(act8945a_i2c_init);
+
+static void __exit act8945a_i2c_exit(void)
+{
+ i2c_del_driver(&act8945a_i2c_driver);
+}
+module_exit(act8945a_i2c_exit);
+
+MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
--
1.7.9.5
next prev parent reply other threads:[~2016-02-05 3:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-05 3:36 [PATCH v10 0/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver Wenyou Yang
2016-02-05 3:36 ` Wenyou Yang [this message]
2016-02-10 16:55 ` [PATCH v10 1/2] " Lee Jones
2016-02-05 3:36 ` [PATCH v10 2/2] mfd: add documentation for ACT8945A DT bindings Wenyou Yang
2016-02-10 16:55 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454643390-16910-2-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jacmet@gmail.com \
--cc=javier@dowhile0.org \
--cc=k.kozlowski@samsung.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).