From: Sinan Kaya <okaya@codeaurora.org>
To: dmaengine@vger.kernel.org, marc.zyngier@arm.com,
mark.rutland@arm.com, timur@codeaurora.org,
devicetree@vger.kernel.org, cov@codeaurora.org,
vinod.koul@intel.com, jcm@redhat.com
Cc: shankerd@codeaurora.org, vikrams@codeaurora.org,
eric.auger@linaro.org, agross@codeaurora.org, arnd@arndb.de,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH V14 1/9] dma: qcom_bam_dma: move to qcom directory
Date: Thu, 4 Feb 2016 23:34:32 -0500 [thread overview]
Message-ID: <1454646882-24369-2-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1454646882-24369-1-git-send-email-okaya@codeaurora.org>
Creating a QCOM directory for all QCOM DMA source files.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
---
drivers/dma/Kconfig | 11 ++---------
drivers/dma/Makefile | 2 +-
drivers/dma/qcom/Kconfig | 8 ++++++++
drivers/dma/qcom/Makefile | 1 +
drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} | 4 ++--
5 files changed, 14 insertions(+), 12 deletions(-)
create mode 100644 drivers/dma/qcom/Kconfig
create mode 100644 drivers/dma/qcom/Makefile
rename drivers/dma/{qcom_bam_dma.c => qcom/bam_dma.c} (99%)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 79b1390..245b061 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -408,15 +408,6 @@ config PXA_DMA
16 to 32 channels for peripheral to memory or memory to memory
transfers.
-config QCOM_BAM_DMA
- tristate "QCOM BAM DMA support"
- depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
- select DMA_ENGINE
- select DMA_VIRTUAL_CHANNELS
- ---help---
- Enable support for the QCOM BAM DMA controller. This controller
- provides DMA capabilities for a variety of on-chip devices.
-
config SIRF_DMA
tristate "CSR SiRFprimaII/SiRFmarco DMA support"
depends on ARCH_SIRF
@@ -539,6 +530,8 @@ config ZX_DMA
# driver files
source "drivers/dma/bestcomm/Kconfig"
+source "drivers/dma/qcom/Kconfig"
+
source "drivers/dma/dw/Kconfig"
source "drivers/dma/hsu/Kconfig"
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 2dd0a067..6084127 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_PCH_DMA) += pch_dma.o
obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
obj-$(CONFIG_PXA_DMA) += pxa_dma.o
-obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
obj-$(CONFIG_RENESAS_DMA) += sh/
obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
@@ -67,4 +66,5 @@ obj-$(CONFIG_TI_EDMA) += edma.o
obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
+obj-y += qcom/
obj-y += xilinx/
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
new file mode 100644
index 0000000..f17c272
--- /dev/null
+++ b/drivers/dma/qcom/Kconfig
@@ -0,0 +1,8 @@
+config QCOM_BAM_DMA
+ tristate "QCOM BAM DMA support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the QCOM BAM DMA controller. This controller
+ provides DMA capabilities for a variety of on-chip devices.
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
new file mode 100644
index 0000000..f612ae3
--- /dev/null
+++ b/drivers/dma/qcom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom/bam_dma.c
similarity index 99%
rename from drivers/dma/qcom_bam_dma.c
rename to drivers/dma/qcom/bam_dma.c
index 5a250cd..b6f053d 100644
--- a/drivers/dma/qcom_bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -49,8 +49,8 @@
#include <linux/clk.h>
#include <linux/dmaengine.h>
-#include "dmaengine.h"
-#include "virt-dma.h"
+#include "../dmaengine.h"
+#include "../virt-dma.h"
struct bam_desc_hw {
u32 addr; /* Buffer physical address */
--
1.8.2.1
next prev parent reply other threads:[~2016-02-05 4:35 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-05 4:34 [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver Sinan Kaya
2016-02-05 4:34 ` Sinan Kaya [this message]
2016-03-11 2:13 ` [PATCH V14 1/9] dma: qcom_bam_dma: move to qcom directory Vinod Koul
2016-02-05 4:34 ` [PATCH V14 2/9] dma: hidma: Add Device Tree binding Sinan Kaya
2016-03-11 2:16 ` Vinod Koul
2016-02-05 4:34 ` [PATCH V14 3/9] dma: add Qualcomm Technologies HIDMA management driver Sinan Kaya
2016-03-11 2:16 ` Vinod Koul
2016-02-05 4:34 ` [PATCH V14 4/9] dma: add Qualcomm Technologies HIDMA channel driver Sinan Kaya
2016-03-11 2:17 ` Vinod Koul
2016-02-05 4:34 ` [PATCH V14 5/9] dma: qcom_hidma: implement lower level hardware interface Sinan Kaya
2016-03-11 2:06 ` Vinod Koul
2016-03-11 3:08 ` Okaya
2016-03-11 16:02 ` Sinan Kaya
2016-03-11 16:32 ` Vinod Koul
2016-03-11 16:44 ` Sinan Kaya
2016-03-11 19:29 ` Sinan Kaya
2016-03-11 21:59 ` Sinan Kaya
2016-03-13 16:00 ` Vinod Koul
2016-03-14 13:53 ` Sinan Kaya
2016-03-13 15:59 ` Vinod Koul
2016-03-14 13:56 ` Sinan Kaya
2016-02-05 4:34 ` [PATCH V14 6/9] dma: qcom_hidma: add debugfs hooks Sinan Kaya
2016-02-05 4:34 ` [PATCH V14 7/9] dma: qcom_hidma: add support for object hierarchy Sinan Kaya
2016-02-05 4:34 ` [PATCH V14 8/9] vfio, platform: add support for ACPI while detecting the reset driver Sinan Kaya
2016-02-26 16:24 ` Sinan Kaya
2016-02-26 17:15 ` Eric Auger
2016-02-26 19:21 ` Sinan Kaya
2016-03-02 18:34 ` Sinan Kaya
2016-03-03 23:14 ` Eric Auger
2016-03-04 5:20 ` Sinan Kaya
2016-03-07 4:09 ` Eric Auger
2016-03-07 15:30 ` Sinan Kaya
2016-03-08 4:46 ` Eric Auger
2016-03-08 5:07 ` Sinan Kaya
2016-03-08 15:44 ` Sinan Kaya
2016-02-05 4:34 ` [PATCH V14 9/9] vfio, platform: add QTI HIDMA " Sinan Kaya
2016-02-26 17:52 ` Eric Auger
2016-02-26 19:05 ` Sinan Kaya
2016-02-08 10:14 ` [PATCH V14 0/9] dma: add Qualcomm Technologies HIDMA driver Christoffer Dall
2016-02-08 14:24 ` Sinan Kaya
2016-02-08 17:00 ` Christoffer Dall
2016-02-26 16:21 ` Sinan Kaya
2016-02-26 16:52 ` Timur Tabi
2016-03-02 18:40 ` Sinan Kaya
2016-03-03 3:44 ` Vinod Koul
2016-03-03 15:22 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454646882-24369-2-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=arnd@arndb.de \
--cc=cov@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=eric.auger@linaro.org \
--cc=jcm@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=shankerd@codeaurora.org \
--cc=timur@codeaurora.org \
--cc=vikrams@codeaurora.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).