* [PATCH 1/1] scsi: storvsc: Always set no_report_opcodes
@ 2023-06-09 20:38 Michael Kelley
2023-06-15 2:15 ` Martin K. Petersen
0 siblings, 1 reply; 2+ messages in thread
From: Michael Kelley @ 2023-06-09 20:38 UTC (permalink / raw)
To: kys, martin.petersen, longli, wei.liu, decui, jejb, linux-hyperv,
linux-kernel, linux-scsi
Cc: mikelley
Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI
command, so scsi_report_opcode() always fails, resulting in messages
like this:
hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001
The recently added support for command duration limits calls
scsi_report_opcode() four times as each device comes online, which
significantly increases the number of messages logged in a system with
many disks.
Fix the problem by always marking Hyper-V synthetic SCSI devices as
not supporting scsi_report_opcode(). With this setting, the
MAINTENANCE_IN SCSI command is not issued and no messages are logged.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
---
drivers/scsi/storvsc_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index e6bc622..659196a 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1567,6 +1567,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
{
blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
+ /* storvsc devices don't support MAINTENANCE_IN SCSI cmd */
+ sdevice->no_report_opcodes = 1;
sdevice->no_write_same = 1;
/*
--
1.8.3.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH 1/1] scsi: storvsc: Always set no_report_opcodes
2023-06-09 20:38 [PATCH 1/1] scsi: storvsc: Always set no_report_opcodes Michael Kelley
@ 2023-06-15 2:15 ` Martin K. Petersen
0 siblings, 0 replies; 2+ messages in thread
From: Martin K. Petersen @ 2023-06-15 2:15 UTC (permalink / raw)
To: kys, longli, wei.liu, decui, jejb, linux-hyperv, linux-kernel,
linux-scsi, Michael Kelley
Cc: Martin K . Petersen
On Fri, 09 Jun 2023 13:38:21 -0700, Michael Kelley wrote:
> Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI
> command, so scsi_report_opcode() always fails, resulting in messages
> like this:
>
> hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001
>
> The recently added support for command duration limits calls
> scsi_report_opcode() four times as each device comes online, which
> significantly increases the number of messages logged in a system with
> many disks.
>
> [...]
Applied to 6.4/scsi-fixes, thanks!
[1/1] scsi: storvsc: Always set no_report_opcodes
https://git.kernel.org/mkp/scsi/c/31d16e712bdc
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-06-15 2:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-09 20:38 [PATCH 1/1] scsi: storvsc: Always set no_report_opcodes Michael Kelley
2023-06-15 2:15 ` Martin K. Petersen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).