From: Karsten Merker <merker@debian.org>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-sunxi@googlegroups.com, Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
devicetree@vger.kernel.org
Subject: Re: [linux-sunxi] [PATCH 10/11] arm64: dts: add Allwinner A64 SoC .dtsi
Date: Mon, 1 Feb 2016 20:05:21 +0100 [thread overview]
Message-ID: <20160201190521.GC14737@excalibur.cnev.de> (raw)
In-Reply-To: <1454348370-3816-11-git-send-email-andre.przywara@arm.com>
Hello,
a few tiny spelling nitpicks in case you should do a V2:
On Mon, Feb 01, 2016 at 05:39:29PM +0000, Andre Przywara wrote:
> The Allwinner A64 SoC is low-cost SoC with 4 ARM Cortex-A53 cores
s/is low-cost SoC/is a low-cost SoC/
> and the typical tablet / TV box peripherals.
> The Soc is based on the (32-bit) Allwinner H3 chip, sharing most of
s/Soc/SoC/
> the peripherals and the memory map.
> Although the cores are proper 64-bit ones, the whole SoC is actually
> limited to 4GB (including all the supported DRAM), so we use 32-bit
> address and size cells. This has the nice feature of us being able to
> reuse the DT for 32-bit kernels as well.
> This .dtsi lists the hardware that we support so far.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
> Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
> arch/arm64/boot/dts/allwinner/a64.dtsi | 583 ++++++++++++++++++++++
> 3 files changed, 585 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/a64.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
> index 980e065..4a83853 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.txt
> +++ b/Documentation/devicetree/bindings/arm/sunxi.txt
> @@ -14,6 +14,7 @@ using one of the following compatible strings:
> allwinner,sun8i-a83t
> allwinner,sun8i-h3
> allwinner,sun9i-a80
> + allwinner,a64
Please see my followup to patch No. 5 in this series.
s/allwinner,a64/allwinner,sun50i-a64/ ?
>
> For Allwinner SoCs without any specific needs the generic fallback value of:
> allwinner,sunxi
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index e59f57b..44b0c6c 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -77,6 +77,7 @@ Required properties:
> "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
> "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
> "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
> + "allwinner,a64-bus-gates-clk" - for the A64 multi-parent bus gates clock
see above
>
> Required properties for all clocks:
> - reg : shall be the control register address for the clock.
> diff --git a/arch/arm64/boot/dts/allwinner/a64.dtsi b/arch/arm64/boot/dts/allwinner/a64.dtsi
see above - the dts and dtsi names for the other Allwinner SoCs contain
the SoC family.
> new file mode 100644
> index 0000000..8dce10f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/a64.dtsi
> @@ -0,0 +1,583 @@
> +/*
> + * Copyright (C) 2016 ARM Ltd.
> + * based on the Allwinner H3 dtsi:
> + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/sun4i-a10.h>
> +
> +/ {
> + compatible = "allwinner,a64", "allwinner,sunxi";
see above
> + interrupt-parent = <&gic>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + serial4 = &uart4;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <0>;
> + enable-method = "psci";
> + };
> +
> + cpu@1 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <1>;
> + enable-method = "psci";
> + };
> +
> + cpu@2 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <2>;
> + enable-method = "psci";
> + };
> +
> + cpu@3 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <3>;
> + enable-method = "psci";
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2", "arm,psci";
> + method = "smc";
> + cpu_suspend = <0xc4000001>;
> + cpu_off = <0x84000002>;
> + cpu_on = <0xc4000003>;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x40000000 0>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc24M: osc24M_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "osc24M";
> + };
> +
> + osc32k: osc32k_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "osc32k";
> + };
> +
> + pll1: clk@01c20000 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun8i-a23-pll1-clk";
> + reg = <0x01c20000 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll1";
> + };
> +
> + pll6: clk@01c20028 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun6i-a31-pll6-clk";
> + reg = <0x01c20028 0x4>;
> + clocks = <&osc24M>;
> + clock-output-names = "pll6", "pll6x2";
> + };
> +
> + pll6d2: pll6d2_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-factor-clock";
> + clock-div = <2>;
> + clock-mult = <1>;
> + clocks = <&pll6 0>;
> + clock-output-names = "pll6d2";
> + };
> +
> + /* dummy clock until pll6 can be reused */
> + pll8: pll8_clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <1>;
> + clock-output-names = "pll8";
> + };
> +
> + cpu: cpu_clk@01c20050 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-cpu-clk";
> + reg = <0x01c20050 0x4>;
> + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
> + clock-output-names = "cpu";
> + critical-clocks = <0>;
> + };
> +
> + axi: axi_clk@01c20050 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-axi-clk";
> + reg = <0x01c20050 0x4>;
> + clocks = <&cpu>;
> + clock-output-names = "axi";
> + };
> +
> + ahb1: ahb1_clk@01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun6i-a31-ahb1-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
> + clock-output-names = "ahb1";
> + };
> +
> + ahb2: ahb2_clk@01c2005c {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun8i-h3-ahb2-clk";
> + reg = <0x01c2005c 0x4>;
> + clocks = <&ahb1>, <&pll6d2>;
> + clock-output-names = "ahb2";
> + };
> +
> + apb1: apb1_clk@01c20054 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-apb0-clk";
> + reg = <0x01c20054 0x4>;
> + clocks = <&ahb1>;
> + clock-output-names = "apb1";
> + };
> +
> + apb2: apb2_clk@01c20058 {
> + #clock-cells = <0>;
> + compatible = "allwinner,sun4i-a10-apb1-clk";
> + reg = <0x01c20058 0x4>;
> + clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>;
> + clock-output-names = "apb2";
> + };
> +
> + bus_gates: clk@01c20060 {
> + #clock-cells = <1>;
> + compatible = "allwinner,a64-bus-gates-clk",
see above
> + "allwinner,sunxi-multi-bus-gates-clk";
> + reg = <0x01c20060 0x14>;
> + ahb1_parent {
> + clocks = <&ahb1>;
> + clock-indices = <1>, <5>,
> + <6>, <8>,
> + <9>, <10>,
> + <13>, <14>,
> + <18>, <19>,
> + <20>, <21>,
> + <23>, <24>,
> + <25>, <28>,
> + <32>, <35>,
> + <36>, <37>,
> + <40>, <43>,
> + <44>, <52>,
> + <53>, <54>,
> + <135>;
> + clock-output-names = "bus_mipidsi", "bus_ce",
> + "bus_dma", "bus_mmc0",
> + "bus_mmc1", "bus_mmc2",
> + "bus_nand", "bus_sdram",
> + "bus_ts", "bus_hstimer",
> + "bus_spi0", "bus_spi1",
> + "bus_otg", "bus_otg_ehci0",
> + "bus_ehci0", "bus_otg_ohci0",
> + "bus_ve", "bus_lcd0",
> + "bus_lcd1", "bus_deint",
> + "bus_csi", "bus_hdmi",
> + "bus_de", "bus_gpu",
> + "bus_msgbox", "bus_spinlock",
> + "bus_dbg";
> + };
> + ahb2_parent {
> + clocks = <&ahb2>;
> + clock-indices = <17>, <29>;
> + clock-output-names = "bus_gmac", "bus_ohci0";
> + };
> + apb1_parent {
> + clocks = <&apb1>;
> + clock-indices = <64>, <65>,
> + <69>, <72>,
> + <76>, <77>,
> + <78>;
> + clock-output-names = "bus_codec", "bus_spdif",
> + "bus_pio", "bus_ths",
> + "bus_i2s0", "bus_i2s1",
> + "bus_i2s2";
> + };
> + abp2_parent {
> + clocks = <&apb2>;
> + clock-indices = <96>, <97>,
> + <98>, <101>,
> + <112>, <113>,
> + <114>, <115>,
> + <116>;
> + clock-output-names = "bus_i2c0", "bus_i2c1",
> + "bus_i2c2", "bus_scr",
> + "bus_uart0", "bus_uart1",
> + "bus_uart2", "bus_uart3",
> + "bus_uart4";
> + };
> + };
> +
> + mmc0_clk: clk@01c20088 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c20088 0x4>;
> + clocks = <&osc24M>, <&pll6 0>, <&pll8>;
> + clock-output-names = "mmc0",
> + "mmc0_output",
> + "mmc0_sample";
> + };
> +
> + mmc1_clk: clk@01c2008c {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c2008c 0x4>;
> + clocks = <&osc24M>, <&pll6 0>, <&pll8>;
> + clock-output-names = "mmc1",
> + "mmc1_output",
> + "mmc1_sample";
> + };
> +
> + mmc2_clk: clk@01c20090 {
> + #clock-cells = <1>;
> + compatible = "allwinner,sun4i-a10-mmc-clk";
> + reg = <0x01c20090 0x4>;
> + clocks = <&osc24M>, <&pll6 0>, <&pll8>;
> + clock-output-names = "mmc2",
> + "mmc2_output",
> + "mmc2_sample";
> + };
> + };
> +
> + regulators {
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + mmc0: mmc@01c0f000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c0f000 0x1000>;
> + clocks = <&bus_gates 8>,
> + <&mmc0_clk 0>,
> + <&mmc0_clk 1>,
> + <&mmc0_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + resets = <&ahb_rst 8>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc1: mmc@01c10000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c10000 0x1000>;
> + clocks = <&bus_gates 9>,
> + <&mmc1_clk 0>,
> + <&mmc1_clk 1>,
> + <&mmc1_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + resets = <&ahb_rst 9>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mmc2: mmc@01c11000 {
> + compatible = "allwinner,sun5i-a13-mmc";
> + reg = <0x01c11000 0x1000>;
> + clocks = <&bus_gates 10>,
> + <&mmc2_clk 0>,
> + <&mmc2_clk 1>,
> + <&mmc2_clk 2>;
> + clock-names = "ahb",
> + "mmc",
> + "output",
> + "sample";
> + resets = <&ahb_rst 10>;
> + reset-names = "ahb";
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + pio: pinctrl@01c20800 {
> + compatible = "allwinner,a64-pinctrl";
see above
> + reg = <0x01c20800 0x400>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&bus_gates 69>;
> + gpio-controller;
> + #gpio-cells = <3>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + uart0_pins_a: uart0@0 {
> + allwinner,pins = "PB8", "PB9";
> + allwinner,function = "uart0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart0_pins_b: uart0@1 {
> + allwinner,pins = "PF2", "PF3";
> + allwinner,function = "uart0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart1_pins: uart1@0 {
> + allwinner,pins = "PG6", "PG7", "PG8", "PG9";
> + allwinner,function = "uart1";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart2_pins: uart2@0 {
> + allwinner,pins = "PB0", "PB1", "PB2", "PB3";
> + allwinner,function = "uart2";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart3_pins_a: uart3@0 {
> + allwinner,pins = "PD0", "PD1";
> + allwinner,function = "uart3";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart3_pins_b: uart3@1 {
> + allwinner,pins = "PH4", "PH5", "PH6", "PH7";
> + allwinner,function = "uart3";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + uart4_pins: uart4@0 {
> + allwinner,pins = "PD2", "PD3", "PD4", "PD5";
> + allwinner,function = "uart4";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc0_pins: mmc0@0 {
> + allwinner,pins = "PF0", "PF1", "PF2", "PF3",
> + "PF4", "PF5";
> + allwinner,function = "mmc0";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc0_default_cd_pin: mmc0_cd_pin@0 {
> + allwinner,pins = "PF6";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> + };
> +
> + mmc1_pins: mmc1@0 {
> + allwinner,pins = "PG0", "PG1", "PG2", "PG3",
> + "PG4", "PG5";
> + allwinner,function = "mmc1";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> + mmc2_pins: mmc2@0 {
> + allwinner,pins = "PC1", "PC5", "PC6", "PC8",
> + "PC9", "PC10";
> + allwinner,function = "mmc2";
> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> + };
> +
> + ahb_rst: reset@01c202c0 {
> + #reset-cells = <1>;
> + compatible = "allwinner,sun6i-a31-ahb1-reset";
> + reg = <0x01c202c0 0xc>;
> + };
> +
> + apb1_rst: reset@01c202d0 {
> + #reset-cells = <1>;
> + compatible = "allwinner,sun6i-a31-clock-reset";
> + reg = <0x01c202d0 0x4>;
> + };
> +
> + apb2_rst: reset@01c202d8 {
> + #reset-cells = <1>;
> + compatible = "allwinner,sun6i-a31-clock-reset";
> + reg = <0x01c202d8 0x4>;
> + };
> +
> + uart0: serial@01c28000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28000 0x400>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&bus_gates 112>;
> + resets = <&apb2_rst 16>;
> + reset-names = "apb2";
> + status = "disabled";
> + };
> +
> + uart1: serial@01c28400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28400 0x400>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&bus_gates 113>;
> + resets = <&apb2_rst 17>;
> + reset-names = "apb2";
> + status = "disabled";
> + };
> +
> + uart2: serial@01c28800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28800 0x400>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&bus_gates 114>;
> + resets = <&apb2_rst 18>;
> + reset-names = "apb2";
> + status = "disabled";
> + };
> +
> + uart3: serial@01c28c00 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c28c00 0x400>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&bus_gates 115>;
> + resets = <&apb2_rst 19>;
> + reset-names = "apb2";
> + status = "disabled";
> + };
> +
> + uart4: serial@01c29000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x01c29000 0x400>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&bus_gates 116>;
> + resets = <&apb2_rst 20>;
> + reset-names = "apb2";
> + status = "disabled";
> + };
> +
> + rtc: rtc@01f00000 {
> + compatible = "allwinner,sun6i-a31-rtc";
> + reg = <0x01f00000 0x54>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + gic: interrupt-controller@{
> + compatible = "arm,gic-400";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> +
> + reg = <0x01C81000 0x1000>,
> + <0x01C82000 0x2000>,
> + <0x01C84000 0x2000>,
> + <0x01C86000 0x2000>;
> + interrupts = <GIC_PPI 9
> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +};
> --
> 2.6.4
Regards,
Karsten
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
next prev parent reply other threads:[~2016-02-01 19:06 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-01 17:39 [PATCH 00/11] arm64: Introduce Allwinner A64 and Pine64 support Andre Przywara
2016-02-01 17:39 ` [PATCH 01/11] irqchip: sun4i: fix compilation outside of arch/arm Andre Przywara
2016-02-02 14:51 ` [tip:irq/urgent] irqchip/sun4i: Fix compilation outside of arch/ arm tip-bot for Andre Przywara
2016-02-02 15:12 ` [PATCH 01/11] irqchip: sun4i: fix compilation outside of arch/arm Matthias Brugger
2016-02-02 15:32 ` Andre Przywara
2016-02-02 16:50 ` Matthias Brugger
2016-02-01 17:39 ` [PATCH 02/11] crypto: sunxi-ss: prevent compilation on 64-bit Andre Przywara
2016-02-02 3:16 ` Herbert Xu
2016-02-02 8:42 ` [linux-sunxi] " LABBE Corentin
2016-02-06 7:46 ` Herbert Xu
2016-02-01 17:39 ` [PATCH 03/11] drivers: rtc: allow compilation of sun6i RTC for all sunxi SoCs Andre Przywara
2016-02-02 9:44 ` Maxime Ripard
2016-02-04 22:58 ` Alexandre Belloni
2016-02-01 17:39 ` [PATCH 04/11] arm64: Introduce Allwinner SoC config option Andre Przywara
2016-02-02 15:20 ` Matthias Brugger
2016-02-02 15:30 ` Andre Przywara
2016-02-02 16:04 ` Arnd Bergmann
2016-02-01 17:39 ` [PATCH 05/11] drivers: pinctrl: add driver for Allwinner A64 SoC Andre Przywara
2016-02-01 18:27 ` Karsten Merker
2016-02-01 18:45 ` [linux-sunxi] " Karsten Merker
2016-02-01 23:02 ` André Przywara
2016-02-01 22:49 ` André Przywara
2016-02-02 1:58 ` [linux-sunxi] " Siarhei Siamashka
2016-02-02 14:24 ` Andre Przywara
2016-02-02 17:37 ` Maxime Ripard
2016-02-02 10:00 ` Maxime Ripard
2016-02-02 10:09 ` Chen-Yu Tsai
2016-02-02 16:53 ` Andre Przywara
2016-02-04 16:51 ` Maxime Ripard
2016-02-08 15:54 ` Rob Herring
2016-02-08 15:58 ` Andre Przywara
2016-02-09 17:12 ` Maxime Ripard
2016-02-01 17:39 ` [PATCH 06/11] clk: sunxi: add generic multi-parent bus clock gates driver Andre Przywara
2016-02-01 18:40 ` Jean-Francois Moine
2016-02-01 23:01 ` André Przywara
2016-02-01 17:39 ` [PATCH 07/11] clk: sunxi: add generic allwinner,sunxi name Andre Przywara
2016-02-08 15:57 ` Rob Herring
2016-02-08 16:06 ` Andre Przywara
2016-02-01 17:39 ` [PATCH 08/11] clk: sunxi: improve error reporting for the mux clock Andre Przywara
2016-02-02 18:02 ` Maxime Ripard
2016-02-02 18:05 ` Andre Przywara
2016-02-01 17:39 ` [PATCH 09/11] clk: sunxi: add critical-clocks property to mux clocks Andre Przywara
2016-02-01 17:39 ` [PATCH 10/11] arm64: dts: add Allwinner A64 SoC .dtsi Andre Przywara
2016-02-01 19:05 ` Karsten Merker [this message]
2016-02-01 23:03 ` [linux-sunxi] " André Przywara
2016-02-02 16:24 ` Jens Kuske
2016-02-02 16:46 ` Andre Przywara
2016-02-02 17:40 ` Jens Kuske
2016-02-05 8:55 ` Chen-Yu Tsai
2016-02-05 8:50 ` Maxime Ripard
2016-02-08 9:42 ` Andre Przywara
2016-02-23 18:45 ` Maxime Ripard
2016-02-01 17:39 ` [PATCH 11/11] arm64: dts: add Pine64 support Andre Przywara
2016-02-01 19:22 ` [linux-sunxi] " Karsten Merker
2016-02-01 23:04 ` André Przywara
2016-02-05 9:03 ` Maxime Ripard
2016-02-05 10:04 ` Andre Przywara
2016-02-08 0:55 ` [linux-sunxi] " Julian Calaby
2016-02-09 20:33 ` Danny Milosavljevic
2016-02-11 10:32 ` Maxime Ripard
2016-02-02 7:57 ` [PATCH 00/11] arm64: Introduce Allwinner A64 and " lists.nick.betteridge
2016-02-02 8:12 ` André Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160201190521.GC14737@excalibur.cnev.de \
--to=merker@debian.org \
--cc=andre.przywara@arm.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).