From: Krishna Kurapati <quic_kriskura@quicinc.com>
To: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
"Andy Gross" <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Felipe Balbi <balbi@kernel.org>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<quic_pkondeti@quicinc.com>, <quic_ppratap@quicinc.com>,
<quic_wcheng@quicinc.com>, <quic_jackp@quicinc.com>,
<quic_harshq@quicinc.com>, <ahalaney@redhat.com>,
Krishna Kurapati <quic_kriskura@quicinc.com>
Subject: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
Date: Sun, 14 May 2023 11:19:15 +0530 [thread overview]
Message-ID: <20230514054917.21318-8-quic_kriskura@quicinc.com> (raw)
In-Reply-To: <20230514054917.21318-1-quic_kriskura@quicinc.com>
Add USB and DWC3 node for tertiary port of SC8280 along with multiport
IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride
platforms.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 66 ++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 8fa9fbfe5d00..50f6a8424537 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3133,6 +3133,72 @@ usb_1_role_switch: endpoint {
};
};
+ usb_2: usb@a4f8800 {
+ compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
+ reg = <0 0x0a4f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+ <&gcc GCC_USB30_MP_SLEEP_CLK>,
+ <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+ "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MP_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 126 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq",
+ "pwr_event_1",
+ "pwr_event_2",
+ "pwr_event_3",
+ "pwr_event_4";
+
+ power-domains = <&gcc USB30_MP_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_MP_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ status = "disabled";
+
+ usb_2_dwc3: usb@a400000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a400000 0 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x800 0x0>;
+ phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
+ <&usb_2_hsphy1>, <&usb_2_qmpphy1>,
+ <&usb_2_hsphy2>,
+ <&usb_2_hsphy3>;
+ phy-names = "usb2-port0", "usb3-port0",
+ "usb2-port1", "usb3-port1",
+ "usb2-port2",
+ "usb2-port3";
+ };
+ };
+
mdss0: display-subsystem@ae00000 {
compatible = "qcom,sc8280xp-mdss";
reg = <0 0x0ae00000 0 0x1000>;
--
2.40.0
next prev parent reply other threads:[~2023-05-14 5:51 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-14 5:49 [PATCH v8 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
2023-05-14 5:49 ` [PATCH v8 1/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport Krishna Kurapati
2023-05-14 9:46 ` Krzysztof Kozlowski
2023-05-16 10:59 ` Johan Hovold
2023-05-17 11:10 ` Krishna Kurapati PSSNV
2023-05-17 11:44 ` Johan Hovold
2023-05-17 12:19 ` Krishna Kurapati PSSNV
2023-05-17 12:55 ` Johan Hovold
2023-05-14 5:49 ` [PATCH v8 2/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller Krishna Kurapati
2023-05-14 5:49 ` [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info Krishna Kurapati
2023-05-15 21:08 ` Bjorn Andersson
2023-05-16 2:12 ` Krishna Kurapati PSSNV
2023-05-16 22:39 ` Thinh Nguyen
2023-05-16 12:11 ` Johan Hovold
2023-05-16 15:02 ` Krishna Kurapati PSSNV
2023-05-17 3:10 ` Krishna Kurapati PSSNV
2023-05-17 3:21 ` Thinh Nguyen
2023-05-17 7:46 ` Johan Hovold
2023-05-17 23:21 ` Thinh Nguyen
2023-06-07 11:56 ` Johan Hovold
2023-05-17 7:35 ` Johan Hovold
2023-05-17 12:21 ` Krishna Kurapati PSSNV
2023-05-17 15:10 ` Johan Hovold
2023-05-14 5:49 ` [PATCH v8 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers Krishna Kurapati
2023-05-15 21:19 ` Bjorn Andersson
2023-05-16 12:17 ` Johan Hovold
2023-05-16 14:28 ` Krishna Kurapati PSSNV
2023-05-14 5:49 ` [PATCH v8 5/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller Krishna Kurapati
2023-05-15 21:47 ` Bjorn Andersson
2023-05-16 2:31 ` Krishna Kurapati PSSNV
2023-05-17 16:17 ` Johan Hovold
2023-05-14 5:49 ` [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper Krishna Kurapati
2023-05-15 22:27 ` Bjorn Andersson
2023-05-16 2:19 ` Krishna Kurapati PSSNV
2023-05-17 16:37 ` Johan Hovold
2023-05-20 17:48 ` Krishna Kurapati PSSNV
2023-06-07 11:37 ` Johan Hovold
2023-06-07 19:51 ` Krishna Kurapati PSSNV
2023-06-08 9:42 ` Johan Hovold
2023-06-08 15:23 ` Krishna Kurapati PSSNV
2023-06-08 17:57 ` Thinh Nguyen
2023-06-09 8:18 ` Johan Hovold
2023-06-09 18:16 ` Thinh Nguyen
2023-06-15 4:20 ` Krishna Kurapati PSSNV
2023-06-15 21:08 ` Thinh Nguyen
2023-06-21 7:38 ` Johan Hovold
2023-06-22 4:39 ` Krishna Kurapati PSSNV
2023-06-21 7:34 ` Johan Hovold
2023-06-22 22:41 ` Thinh Nguyen
2023-05-26 2:55 ` Bjorn Andersson
2023-05-26 15:25 ` Krishna Kurapati PSSNV
2023-06-07 11:44 ` Johan Hovold
2023-06-07 19:55 ` Krishna Kurapati PSSNV
2023-06-08 9:44 ` Johan Hovold
2023-06-07 12:16 ` Johan Hovold
2023-06-27 15:43 ` Johan Hovold
2023-07-02 19:05 ` Krishna Kurapati PSSNV
2023-07-14 9:00 ` Johan Hovold
2023-07-14 10:38 ` Krishna Kurapati PSSNV
2023-07-21 11:16 ` Johan Hovold
2023-07-21 12:10 ` Konrad Dybcio
2023-07-21 12:54 ` Johan Hovold
2023-08-11 16:48 ` Konrad Dybcio
2023-08-12 8:58 ` Krishna Kurapati PSSNV
2023-05-14 5:49 ` Krishna Kurapati [this message]
2023-05-15 14:26 ` [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 Johan Hovold
2023-05-15 15:32 ` Krishna Kurapati PSSNV
2023-05-16 10:54 ` Johan Hovold
2023-05-16 14:24 ` Krishna Kurapati PSSNV
2023-05-16 14:42 ` Johan Hovold
2023-05-16 14:44 ` Krishna Kurapati PSSNV
2023-05-14 5:49 ` [PATCH v8 8/9] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports Krishna Kurapati
2023-05-14 5:49 ` [PATCH v8 9/9] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller Krishna Kurapati
2023-05-15 2:40 ` [PATCH v8 0/9] Add multiport support for DWC3 controllers Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230514054917.21318-8-quic_kriskura@quicinc.com \
--to=quic_kriskura@quicinc.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=agross@kernel.org \
--cc=ahalaney@redhat.com \
--cc=andersson@kernel.org \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=quic_harshq@quicinc.com \
--cc=quic_jackp@quicinc.com \
--cc=quic_pkondeti@quicinc.com \
--cc=quic_ppratap@quicinc.com \
--cc=quic_wcheng@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).