From: Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
"Andy Gross" <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Felipe Balbi <balbi@kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <quic_pkondeti@quicinc.com>,
<quic_ppratap@quicinc.com>, <quic_wcheng@quicinc.com>,
<quic_jackp@quicinc.com>, <quic_harshq@quicinc.com>,
<ahalaney@redhat.com>
Subject: Re: [PATCH v8 5/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
Date: Tue, 16 May 2023 08:01:27 +0530 [thread overview]
Message-ID: <5a7f993e-9340-825f-e8ea-833d4e0a0c2d@quicinc.com> (raw)
In-Reply-To: <20230515214730.epeelsnp3bznssr5@ripper>
On 5/16/2023 3:17 AM, Bjorn Andersson wrote:
> On Sun, May 14, 2023 at 11:19:13AM +0530, Krishna Kurapati wrote:
>> Currently the DWC3 driver supports only single port controller
>> which requires at most one HS and one SS PHY.
>>
>> But the DWC3 USB controller can be connected to multiple ports and
>> each port can have their own PHYs. Each port of the multiport
>> controller can either be HS+SS capable or HS only capable
>> Proper quantification of them is required to modify GUSB2PHYCFG
>> and GUSB3PIPECTL registers appropriately.
>>
>> Add support for detecting, obtaining and configuring phy's supported
>> by a multiport controller and limit the max number of ports
>> supported to 4.
>>
>> Co-developed-by: Harsh Agarwal <quic_harshq@quicinc.com>
>
> Please include Harsh's signed-off-by as well here, to clarify that you
> both certify the origin of this patch.
>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
>> drivers/usb/dwc3/core.c | 266 ++++++++++++++++++++++++++++++----------
>> drivers/usb/dwc3/core.h | 11 +-
>> drivers/usb/dwc3/drd.c | 13 +-
>> 3 files changed, 213 insertions(+), 77 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> [..]
>> @@ -744,22 +777,38 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>> static int dwc3_phy_init(struct dwc3 *dwc)
>> {
>> int ret;
>> + int i;
>> + int j;
>>
>> usb_phy_init(dwc->usb2_phy);
>> usb_phy_init(dwc->usb3_phy);
>>
>> - ret = phy_init(dwc->usb2_generic_phy);
>> - if (ret < 0)
>> - goto err_shutdown_usb3_phy;
>> + for (i = 0; i < dwc->num_usb2_ports; i++) {
>> + ret = phy_init(dwc->usb2_generic_phy[i]);
>> + if (ret < 0) {
>> + /* clean up prior initialized HS PHYs */
>> + for (j = 0; j < i; j++)
>> + phy_exit(dwc->usb2_generic_phy[j]);
>> + goto err_shutdown_usb3_phy;
>
> The idiomatic form is to goto err_exit_usb2_phy and let it phy_exit()
> from i - 1 to 0. That would avoid duplicating this snippet.
>
>> + }
>> + }
>>
>> - ret = phy_init(dwc->usb3_generic_phy);
>> - if (ret < 0)
>> - goto err_exit_usb2_phy;
>> + for (i = 0; i < dwc->num_usb2_ports; i++) {
>
> When you call dwc3_ss_phy_setup() the index refer to port0, port1... but
> when you refer to the phys you consistently loops over num_usb2_ports.
>
> The only case I can think of where this would be useful is if it's not
> the first N ports that are SS-capable (e.g. port0 and port can do SS).
>
> If this is the case, is it correct that this should not be reflected in
> the index passed to e.g. dwc3_ss_phy_setup()?
>
> If this is not the case, could you please transition these SS-related
> loops to iterate over usb3_generic_phy[0..num_usb3_ports)?
Hi Bjorn,
The reason why I used num_usb2_ports here and num_usb3_ports in
ss_phy_setup is that, there may be cases where not the ones in the
beginning but the last few ports of multiport controller are SS capable.
In that case trying to keep track of them and accordingly executing phy
operations is difficult. Instead since all ports are atleast HS capable
and calling a Phy op on a non-existent SS Phy is still harmless as the
phy pointer is NULL and phy op's return 0.
Coming to ss_phy_setup, we need to modify the GUSB3PIPECTL registers
which are same as number of ss ports present. And modifying these
registers whether or not the Phy is used is completely fine as it is
done even in today's code (dwc3_phy_setup). In this case, if there are 2
SS Phy's we need to loop over and modify GUSB3PIPECTL(0) and
GUSB3PIPECTL(1) and so we need to use num_usb3_ports.
For the above two reasons I used num_usb2_ports wherever I did phy
operations and num_usb3_ports wherever GUSB3PIPECTL is being modified
like I did in dwc3_core_init as well.
>
>> + ret = phy_init(dwc->usb3_generic_phy[i]);
>> + if (ret < 0) {
>> + /* clean up prior initialized SS PHYs */
>> + for (j = 0; j < i; j++)
>> + phy_exit(dwc->usb3_generic_phy[j]);
>> + goto err_exit_usb2_phy;
>
> For the purpose of symmetry, same suggestion as above. phy_exit() i - 1
> through 0, then reset j to dwc->num_usb2_ports and fall through to
> err_exit_usb2_phy.
I will try to set i/j to proper values to cleanup code appropriately.
But isn't this fine for now as I don't want to make too many changes in
next version. I will make sure to cleanup this section in a separate
patch after this series if that is fine.
>> + }
>> + }
>>
>> return 0;
>>
>> err_exit_usb2_phy:
>> - phy_exit(dwc->usb2_generic_phy);
>> + for (i = 0; i < dwc->num_usb2_ports; i++)
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> +
>> err_shutdown_usb3_phy:
>> usb_phy_shutdown(dwc->usb3_phy);
>> usb_phy_shutdown(dwc->usb2_phy);
>> @@ -769,8 +818,12 @@ static int dwc3_phy_init(struct dwc3 *dwc)
> [..]
>> static int dwc3_phy_power_on(struct dwc3 *dwc)
>> {
>> int ret;
>> + int i;
>> + int j;
>>
>> usb_phy_set_suspend(dwc->usb2_phy, 0);
>> usb_phy_set_suspend(dwc->usb3_phy, 0);
>>
>> - ret = phy_power_on(dwc->usb2_generic_phy);
>> - if (ret < 0)
>> - goto err_suspend_usb3_phy;
>> + for (i = 0; i < dwc->num_usb2_ports; i++) {
>> + ret = phy_power_on(dwc->usb2_generic_phy[i]);
>> + if (ret < 0) {
>> + /* Turn off prior ON'ed HS Phy's */
>> + for (j = 0; j < i; j++)
>> + phy_power_off(dwc->usb2_generic_phy[j]);
>> + goto err_suspend_usb3_phy;
>
> As above, I'd prefer that you don't duplicate the phy_power_off() loop.
>
>> + }
>> + }
>>
>> - ret = phy_power_on(dwc->usb3_generic_phy);
>> - if (ret < 0)
>> - goto err_power_off_usb2_phy;
>> + for (i = 0; i < dwc->num_usb2_ports; i++) {
>> + ret = phy_power_on(dwc->usb3_generic_phy[i]);
>> + if (ret < 0) {
>> + /* Turn of prior ON'ed SS Phy's */
>> + for (j = 0; j < i; j++)
>> + phy_power_off(dwc->usb3_generic_phy[j]);
>> + goto err_power_off_usb2_phy;
>> + }
>> + }
>>
>> return 0;
> [..]
>> +static int dwc3_get_multiport_phys(struct dwc3 *dwc)
>> +{
>> + int ret;
>> + struct device *dev = dwc->dev;
>> + int i;
>> + char phy_name[11];
>
> It would be prettier if you sorted these lines by length, longest
> first...
>
Sure, will fix this nit.
> [..]
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index d3401963bc27..84f6303922aa 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -35,6 +35,9 @@
>>
>> #define DWC3_MSG_MAX 500
>>
>> +/* Number of ports supported by a multiport controller */
>> +#define MAX_PORTS_SUPPORTED 4
>
> I think it would be preferred to prefix this DWC3_ (so perhaps just
> DWC3_MAX_PORTS, to keep it shorter)
Sure, will fix this nit.
Thanks,
Krishna,
>
>> +
>> /* Define XHCI Extcap register offsets for getting multiport info */
>> #define XHCI_HCC_PARAMS_OFFSET 0x10
>> #define DWC3_XHCI_HCSPARAMS1 0x04
>> @@ -1038,8 +1041,8 @@ struct dwc3_scratchpad_array {
>> * @usb3_phy: pointer to USB3 PHY
>> * @num_usb2_ports: number of usb2 ports.
>> * @num_usb3_ports: number of usb3 ports.
>> - * @usb2_generic_phy: pointer to USB2 PHY
>> - * @usb3_generic_phy: pointer to USB3 PHY
>> + * @usb2_generic_phy: pointer to array of USB2 PHY
>> + * @usb3_generic_phy: pointer to array of USB3 PHY
>> * @phys_ready: flag to indicate that PHYs are ready
>> * @ulpi: pointer to ulpi interface
>> * @ulpi_ready: flag to indicate that ULPI is initialized
>> @@ -1178,8 +1181,8 @@ struct dwc3 {
>> u8 num_usb2_ports;
>> u8 num_usb3_ports;
>>
>> - struct phy *usb2_generic_phy;
>> - struct phy *usb3_generic_phy;
>> + struct phy *usb2_generic_phy[MAX_PORTS_SUPPORTED];
>> + struct phy *usb3_generic_phy[MAX_PORTS_SUPPORTED];
>>
>> bool phys_ready;
>
next prev parent reply other threads:[~2023-05-16 2:31 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-14 5:49 [PATCH v8 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
2023-05-14 5:49 ` [PATCH v8 1/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport Krishna Kurapati
2023-05-14 9:46 ` Krzysztof Kozlowski
2023-05-16 10:59 ` Johan Hovold
2023-05-17 11:10 ` Krishna Kurapati PSSNV
2023-05-17 11:44 ` Johan Hovold
2023-05-17 12:19 ` Krishna Kurapati PSSNV
2023-05-17 12:55 ` Johan Hovold
2023-05-14 5:49 ` [PATCH v8 2/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller Krishna Kurapati
2023-05-14 5:49 ` [PATCH v8 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info Krishna Kurapati
2023-05-15 21:08 ` Bjorn Andersson
2023-05-16 2:12 ` Krishna Kurapati PSSNV
2023-05-16 22:39 ` Thinh Nguyen
2023-05-16 12:11 ` Johan Hovold
2023-05-16 15:02 ` Krishna Kurapati PSSNV
2023-05-17 3:10 ` Krishna Kurapati PSSNV
2023-05-17 3:21 ` Thinh Nguyen
2023-05-17 7:46 ` Johan Hovold
2023-05-17 23:21 ` Thinh Nguyen
2023-06-07 11:56 ` Johan Hovold
2023-05-17 7:35 ` Johan Hovold
2023-05-17 12:21 ` Krishna Kurapati PSSNV
2023-05-17 15:10 ` Johan Hovold
2023-05-14 5:49 ` [PATCH v8 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers Krishna Kurapati
2023-05-15 21:19 ` Bjorn Andersson
2023-05-16 12:17 ` Johan Hovold
2023-05-16 14:28 ` Krishna Kurapati PSSNV
2023-05-14 5:49 ` [PATCH v8 5/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller Krishna Kurapati
2023-05-15 21:47 ` Bjorn Andersson
2023-05-16 2:31 ` Krishna Kurapati PSSNV [this message]
2023-05-17 16:17 ` Johan Hovold
2023-05-14 5:49 ` [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper Krishna Kurapati
2023-05-15 22:27 ` Bjorn Andersson
2023-05-16 2:19 ` Krishna Kurapati PSSNV
2023-05-17 16:37 ` Johan Hovold
2023-05-20 17:48 ` Krishna Kurapati PSSNV
2023-06-07 11:37 ` Johan Hovold
2023-06-07 19:51 ` Krishna Kurapati PSSNV
2023-06-08 9:42 ` Johan Hovold
2023-06-08 15:23 ` Krishna Kurapati PSSNV
2023-06-08 17:57 ` Thinh Nguyen
2023-06-09 8:18 ` Johan Hovold
2023-06-09 18:16 ` Thinh Nguyen
2023-06-15 4:20 ` Krishna Kurapati PSSNV
2023-06-15 21:08 ` Thinh Nguyen
2023-06-21 7:38 ` Johan Hovold
2023-06-22 4:39 ` Krishna Kurapati PSSNV
2023-06-21 7:34 ` Johan Hovold
2023-06-22 22:41 ` Thinh Nguyen
2023-05-26 2:55 ` Bjorn Andersson
2023-05-26 15:25 ` Krishna Kurapati PSSNV
2023-06-07 11:44 ` Johan Hovold
2023-06-07 19:55 ` Krishna Kurapati PSSNV
2023-06-08 9:44 ` Johan Hovold
2023-06-07 12:16 ` Johan Hovold
2023-06-27 15:43 ` Johan Hovold
2023-07-02 19:05 ` Krishna Kurapati PSSNV
2023-07-14 9:00 ` Johan Hovold
2023-07-14 10:38 ` Krishna Kurapati PSSNV
2023-07-21 11:16 ` Johan Hovold
2023-07-21 12:10 ` Konrad Dybcio
2023-07-21 12:54 ` Johan Hovold
2023-08-11 16:48 ` Konrad Dybcio
2023-08-12 8:58 ` Krishna Kurapati PSSNV
2023-05-14 5:49 ` [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 Krishna Kurapati
2023-05-15 14:26 ` Johan Hovold
2023-05-15 15:32 ` Krishna Kurapati PSSNV
2023-05-16 10:54 ` Johan Hovold
2023-05-16 14:24 ` Krishna Kurapati PSSNV
2023-05-16 14:42 ` Johan Hovold
2023-05-16 14:44 ` Krishna Kurapati PSSNV
2023-05-14 5:49 ` [PATCH v8 8/9] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports Krishna Kurapati
2023-05-14 5:49 ` [PATCH v8 9/9] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller Krishna Kurapati
2023-05-15 2:40 ` [PATCH v8 0/9] Add multiport support for DWC3 controllers Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5a7f993e-9340-825f-e8ea-833d4e0a0c2d@quicinc.com \
--to=quic_kriskura@quicinc.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=agross@kernel.org \
--cc=ahalaney@redhat.com \
--cc=andersson@kernel.org \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=quic_harshq@quicinc.com \
--cc=quic_jackp@quicinc.com \
--cc=quic_pkondeti@quicinc.com \
--cc=quic_ppratap@quicinc.com \
--cc=quic_wcheng@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).