From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Georgi Djakov <djakov@kernel.org>, Leo Yan <leo.yan@linaro.org>,
Evan Green <evgreen@chromium.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v2 07/22] interconnect: qcom: Fold smd-rpm.h into icc-rpm.h
Date: Fri, 09 Jun 2023 22:19:12 +0200 [thread overview]
Message-ID: <20230526-topic-smd_icc-v2-7-e5934b07d813@linaro.org> (raw)
In-Reply-To: <20230526-topic-smd_icc-v2-0-e5934b07d813@linaro.org>
smd-rpm.h is not very useful as-is and both files are always included
anyway.. Combine them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/interconnect/qcom/icc-rpm.c | 1 -
drivers/interconnect/qcom/icc-rpm.h | 5 +++++
drivers/interconnect/qcom/msm8916.c | 1 -
drivers/interconnect/qcom/msm8939.c | 1 -
drivers/interconnect/qcom/msm8974.c | 2 +-
drivers/interconnect/qcom/msm8996.c | 1 -
drivers/interconnect/qcom/qcm2290.c | 1 -
drivers/interconnect/qcom/qcs404.c | 1 -
drivers/interconnect/qcom/sdm660.c | 1 -
drivers/interconnect/qcom/smd-rpm.c | 2 +-
drivers/interconnect/qcom/smd-rpm.h | 15 ---------------
11 files changed, 7 insertions(+), 24 deletions(-)
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 863e8ba1daa2..b8ecf9538ab9 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -14,7 +14,6 @@
#include <linux/regmap.h>
#include <linux/slab.h>
-#include "smd-rpm.h"
#include "icc-common.h"
#include "icc-rpm.h"
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index ba840a436cc0..9b4ea4e39b9f 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -6,6 +6,8 @@
#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
+#include <linux/soc/qcom/smd-rpm.h>
+
#include <dt-bindings/interconnect/qcom,icc.h>
#define RPM_BUS_MASTER_REQ 0x73616d62
@@ -121,4 +123,7 @@ enum qos_mode {
int qnoc_probe(struct platform_device *pdev);
int qnoc_remove(struct platform_device *pdev);
+bool qcom_icc_rpm_smd_available(void);
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
+
#endif
diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c
index 5c4ba2f37c8e..196b05879896 100644
--- a/drivers/interconnect/qcom/msm8916.c
+++ b/drivers/interconnect/qcom/msm8916.c
@@ -15,7 +15,6 @@
#include <dt-bindings/interconnect/qcom,msm8916.h>
-#include "smd-rpm.h"
#include "icc-rpm.h"
enum {
diff --git a/drivers/interconnect/qcom/msm8939.c b/drivers/interconnect/qcom/msm8939.c
index caf0aefad668..639566dce45a 100644
--- a/drivers/interconnect/qcom/msm8939.c
+++ b/drivers/interconnect/qcom/msm8939.c
@@ -16,7 +16,6 @@
#include <dt-bindings/interconnect/qcom,msm8939.h>
-#include "smd-rpm.h"
#include "icc-rpm.h"
enum {
diff --git a/drivers/interconnect/qcom/msm8974.c b/drivers/interconnect/qcom/msm8974.c
index 1828deaca443..968162213d40 100644
--- a/drivers/interconnect/qcom/msm8974.c
+++ b/drivers/interconnect/qcom/msm8974.c
@@ -38,7 +38,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include "smd-rpm.h"
+#include "icc-rpm.h"
enum {
MSM8974_BIMC_MAS_AMPSS_M0 = 1,
diff --git a/drivers/interconnect/qcom/msm8996.c b/drivers/interconnect/qcom/msm8996.c
index 20340fb62fe6..1f7e88a37acd 100644
--- a/drivers/interconnect/qcom/msm8996.c
+++ b/drivers/interconnect/qcom/msm8996.c
@@ -18,7 +18,6 @@
#include <dt-bindings/interconnect/qcom,msm8996.h>
#include "icc-rpm.h"
-#include "smd-rpm.h"
#include "msm8996.h"
static const char * const mm_intf_clocks[] = {
diff --git a/drivers/interconnect/qcom/qcm2290.c b/drivers/interconnect/qcom/qcm2290.c
index a29cdb4fac03..cb636e67a5a4 100644
--- a/drivers/interconnect/qcom/qcm2290.c
+++ b/drivers/interconnect/qcom/qcm2290.c
@@ -19,7 +19,6 @@
#include <linux/slab.h>
#include "icc-rpm.h"
-#include "smd-rpm.h"
enum {
QCM2290_MASTER_APPSS_PROC = 1,
diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c
index fae155344332..938283ddd0e3 100644
--- a/drivers/interconnect/qcom/qcs404.c
+++ b/drivers/interconnect/qcom/qcs404.c
@@ -13,7 +13,6 @@
#include <linux/of_device.h>
-#include "smd-rpm.h"
#include "icc-rpm.h"
enum {
diff --git a/drivers/interconnect/qcom/sdm660.c b/drivers/interconnect/qcom/sdm660.c
index 7ffaf70d62d3..003fc7d110a7 100644
--- a/drivers/interconnect/qcom/sdm660.c
+++ b/drivers/interconnect/qcom/sdm660.c
@@ -17,7 +17,6 @@
#include <linux/slab.h>
#include "icc-rpm.h"
-#include "smd-rpm.h"
enum {
SDM660_MASTER_IPA = 1,
diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c
index dc8ff8d133a9..b0183262ba66 100644
--- a/drivers/interconnect/qcom/smd-rpm.c
+++ b/drivers/interconnect/qcom/smd-rpm.c
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/soc/qcom/smd-rpm.h>
-#include "smd-rpm.h"
+#include "icc-rpm.h"
#define RPM_KEY_BW 0x00007762
diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
deleted file mode 100644
index ca9d0327b8ac..000000000000
--- a/drivers/interconnect/qcom/smd-rpm.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2019, Linaro Ltd.
- * Author: Georgi Djakov <georgi.djakov@linaro.org>
- */
-
-#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
-#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
-
-#include <linux/soc/qcom/smd-rpm.h>
-
-bool qcom_icc_rpm_smd_available(void);
-int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
-
-#endif
--
2.41.0
next prev parent reply other threads:[~2023-06-09 20:20 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-09 20:19 [PATCH v2 00/22] Restructure RPM SMD ICC Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 01/22] soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 02/22] soc: qcom: smd-rpm: Use tabs for defines Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 03/22] clk: qcom: smd-rpm: Move some RPM resources to the common header Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 04/22] clk: qcom: smd-rpm: Export clock scaling availability Konrad Dybcio
2023-06-10 11:35 ` Stephan Gerhold
2023-06-10 12:15 ` Konrad Dybcio
2023-06-10 18:53 ` Konrad Dybcio
2023-06-10 19:25 ` Stephan Gerhold
2023-06-10 19:39 ` Konrad Dybcio
2023-06-11 9:20 ` Stephan Gerhold
2023-06-12 12:51 ` Konrad Dybcio
2023-06-12 17:03 ` Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 05/22] interconnect: qcom: icc-rpm: Introduce keep_alive Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 06/22] interconnect: qcom: icc-rpm: Allow negative QoS offset Konrad Dybcio
2023-06-09 20:19 ` Konrad Dybcio [this message]
2023-06-09 20:19 ` [PATCH v2 08/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 09/22] interconnect: qcom: Add missing headers in icc-rpm.h Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 10/22] interconnect: qcom: Define RPM bus clocks Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 11/22] interconnect: qcom: sdm660: Hook up RPM bus clk definitions Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 12/22] interconnect: qcom: msm8996: " Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 13/22] interconnect: qcom: qcs404: " Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 14/22] interconnect: qcom: msm8939: " Konrad Dybcio
2023-06-10 12:02 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 15/22] interconnect: qcom: msm8916: " Konrad Dybcio
2023-06-10 12:02 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 16/22] interconnect: qcom: qcm2290: " Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 17/22] interconnect: qcom: icc-rpm: Control bus rpmcc from icc Konrad Dybcio
2023-06-10 11:58 ` Stephan Gerhold
2023-06-10 12:14 ` Konrad Dybcio
2023-06-10 16:20 ` Stephan Gerhold
2023-06-10 17:54 ` Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 18/22] clk: qcom: smd-rpm: Separate out interconnect bus clocks Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 19/22] interconnect: qcom: icc-rpm: Fix bucket number Konrad Dybcio
2023-06-10 17:46 ` Stephan Gerhold
2023-06-10 17:53 ` Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts Konrad Dybcio
2023-06-10 18:00 ` Stephan Gerhold
2023-06-10 18:28 ` Konrad Dybcio
2023-06-10 18:43 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 21/22] interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req Konrad Dybcio
2023-06-10 18:46 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations Konrad Dybcio
2023-06-10 19:06 ` Stephan Gerhold
2023-06-10 19:09 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230526-topic-smd_icc-v2-7-e5934b07d813@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=djakov@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=evgreen@chromium.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).