From: William Zhang <william.zhang@broadcom.com>
To: Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com>,
Linux MTD List <linux-mtd@lists.infradead.org>
Cc: f.fainelli@gmail.com, rafal@milecki.pl, kursad.oney@broadcom.com,
joel.peshkin@broadcom.com, computersforpeace@gmail.com,
anand.gore@broadcom.com, dregan@mail.com,
kamal.dasu@broadcom.com, tomer.yacoby@broadcom.com,
dan.beygelman@broadcom.com,
William Zhang <william.zhang@broadcom.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
linux-kernel@vger.kernel.org,
Vignesh Raghavendra <vigneshr@ti.com>,
Richard Weinberger <richard@nod.at>,
Kamal Dasu <kdasu.kdev@gmail.com>
Subject: [PATCH 11/12] mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
Date: Tue, 6 Jun 2023 16:12:51 -0700 [thread overview]
Message-ID: <20230606231252.94838-12-william.zhang@broadcom.com> (raw)
In-Reply-To: <20230606231252.94838-1-william.zhang@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 3986 bytes --]
BCMBCA broadband SoC based board design does not specify ecc setting in
dts but rather use the SoC NAND strap info to obtain the ecc strength
and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for
this purpose and update driver to support this option.
The generic nand ecc settings still take precedence over this flag. For
example, if nand-ecc-strength is set in the dts, the driver ignores the
strap setting and falls back to original behavior. This makes sure that
the existing BCMBCA board dts still works the old way even the strap
flag is set in the BCMBCA chip dtsi.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 72 +++++++++++++++++++++---
1 file changed, 64 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 656be4d73016..8c7cea36ac71 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -1076,6 +1076,38 @@ static void brcmnand_set_sector_size_1k(struct brcmnand_host *host, int val)
nand_writereg(ctrl, acc_control_offs, tmp);
}
+static int brcmnand_get_spare_size(struct brcmnand_host *host)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_ACC_CONTROL);
+ u32 acc = nand_readreg(ctrl, acc_control_offs);
+
+ return (acc&brcmnand_spare_area_mask(ctrl));
+}
+
+static int brcmnand_get_ecc_strength(struct brcmnand_host *host)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_ACC_CONTROL);
+ int sector_size_1k = brcmnand_get_sector_size_1k(host);
+ int spare_area_size, ecc_level, ecc_strength;
+ u32 acc;
+
+ spare_area_size = brcmnand_get_spare_size(host);
+ acc = nand_readreg(ctrl, acc_control_offs);
+ ecc_level = (acc & brcmnand_ecc_level_mask(ctrl)) >> brcmnand_ecc_level_shift(ctrl);
+ if (sector_size_1k)
+ ecc_strength = ecc_level<<1;
+ else if (spare_area_size == 16 && ecc_level == 15)
+ ecc_strength = 1; /* hamming */
+ else
+ ecc_strength = ecc_level;
+
+ return ecc_strength;
+}
+
/***********************************************************************
* CS_NAND_SELECT
***********************************************************************/
@@ -2656,19 +2688,43 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
nanddev_get_ecc_requirements(&chip->base);
struct brcmnand_controller *ctrl = host->ctrl;
struct brcmnand_cfg *cfg = &host->hwcfg;
- char msg[128];
+ struct device_node *np = nand_get_flash_node(chip);
u32 offs, tmp, oob_sector;
- int ret;
+ int ret, sector_size_1k = 0;
+ bool use_strap = false;
+ char msg[128];
memset(cfg, 0, sizeof(*cfg));
+ use_strap = of_property_read_bool(np, "brcm,nand-ecc-use-strap");
+
+ /*
+ * Set ECC size and strength based on hw configuration from strap
+ * if device tree does not specify them and use strap property is set
+ * If ecc strength is set in dts, don't use strap setting.
+ */
+ if (chip->ecc.strength)
+ use_strap = 0;
+
+ if (use_strap) {
+ chip->ecc.strength = brcmnand_get_ecc_strength(host);
+ sector_size_1k = brcmnand_get_sector_size_1k(host);
+ if (chip->ecc.size == 0) {
+ if (sector_size_1k < 0)
+ chip->ecc.size = 512;
+ else
+ chip->ecc.size = 512<<sector_size_1k;
+ }
+ }
- ret = of_property_read_u32(nand_get_flash_node(chip),
- "brcm,nand-oob-sector-size",
- &oob_sector);
+ ret = of_property_read_u32(np, "brcm,nand-oob-sector-size",
+ &oob_sector);
if (ret) {
- /* Use detected size */
- cfg->spare_area_size = mtd->oobsize /
- (mtd->writesize >> FC_SHIFT);
+ if (use_strap)
+ cfg->spare_area_size = brcmnand_get_spare_size(host);
+ else
+ /* Use detected size */
+ cfg->spare_area_size = mtd->oobsize /
+ (mtd->writesize >> FC_SHIFT);
} else {
cfg->spare_area_size = oob_sector;
}
--
2.37.3
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
next prev parent reply other threads:[~2023-06-06 23:15 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 23:12 [PATCH 00/12] mtd: rawnand: brcmnand: driver and doc updates William Zhang
2023-06-06 23:12 ` [PATCH 01/12] mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller William Zhang
2023-06-07 8:06 ` Miquel Raynal
2023-06-06 23:12 ` [PATCH 02/12] mtd: rawnand: brcmnand: Fix potential false time out warning William Zhang
2023-06-06 23:12 ` [PATCH 03/12] mtd: rawnand: brcmnand: Fix crash during the panic_write William Zhang
2023-06-06 23:12 ` [PATCH 04/12] mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write William Zhang
2023-06-07 8:09 ` Miquel Raynal
2023-06-06 23:12 ` [PATCH 05/12] dt-bindings: mtd: brcmnand: Updates for bcmbca SoCs William Zhang
2023-06-07 8:14 ` Miquel Raynal
2023-06-07 20:01 ` William Zhang
2023-06-09 8:58 ` Miquel Raynal
2023-06-09 19:05 ` William Zhang
2023-06-12 17:43 ` Miquel Raynal
2023-06-14 22:46 ` Rob Herring
2023-06-15 0:40 ` William Zhang
2023-06-14 22:43 ` Rob Herring
2023-06-15 0:28 ` William Zhang
2023-06-06 23:12 ` [PATCH 06/12] ARM: dts: broadcom: bcmbca: Add NAND controller node William Zhang
2023-06-06 23:12 ` [PATCH 07/12] arm64: " William Zhang
2023-06-06 23:12 ` [PATCH 08/12] mtd: rawnand: brcmnand: Rename bcm63138 nand driver William Zhang
2023-06-06 23:12 ` [PATCH 09/12] mtd: rawnand: brcmnand: Add new compatible string William Zhang
2023-06-06 23:12 ` [PATCH 10/12] mtd: rawnand: brcmnand: Add BCMBCA read data bus interface William Zhang
2023-06-07 8:20 ` Miquel Raynal
2023-06-07 20:12 ` William Zhang
2023-06-08 6:15 ` Miquel Raynal
2023-06-08 19:04 ` William Zhang
2023-06-07 8:22 ` Miquel Raynal
2023-06-07 20:24 ` William Zhang
2023-06-08 6:18 ` Miquel Raynal
2023-06-08 19:10 ` William Zhang
2023-06-09 8:35 ` Miquel Raynal
2023-06-09 19:16 ` William Zhang
2023-06-12 17:49 ` Miquel Raynal
2023-06-12 17:53 ` Miquel Raynal
2023-06-12 19:18 ` William Zhang
2023-06-13 6:42 ` Miquel Raynal
2023-06-14 0:00 ` William Zhang
2023-06-14 6:22 ` Miquel Raynal
2023-06-14 23:52 ` William Zhang
2023-06-12 19:03 ` William Zhang
2023-06-11 9:54 ` kernel test robot
2023-06-06 23:12 ` William Zhang [this message]
2023-06-07 8:25 ` [PATCH 11/12] mtd: rawnand: brcmnand: Add support for getting ecc setting from strap Miquel Raynal
2023-06-06 23:12 ` [PATCH 12/12] mtd: rawnand: brcmnand: Support write protection setting from dts William Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230606231252.94838-12-william.zhang@broadcom.com \
--to=william.zhang@broadcom.com \
--cc=anand.gore@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=computersforpeace@gmail.com \
--cc=dan.beygelman@broadcom.com \
--cc=dregan@mail.com \
--cc=f.fainelli@gmail.com \
--cc=joel.peshkin@broadcom.com \
--cc=kamal.dasu@broadcom.com \
--cc=kdasu.kdev@gmail.com \
--cc=kursad.oney@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=rafal@milecki.pl \
--cc=richard@nod.at \
--cc=tomer.yacoby@broadcom.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).