From: "Inès Varhol" <ines.varhol@telecom-paris.fr>
To: qemu-devel@nongnu.org
Cc: "Laurent Vivier" <lvivier@redhat.com>,
"Thomas Huth" <thuth@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
qemu-arm@nongnu.org, "Alistair Francis" <alistair@alistair23.me>,
"Inès Varhol" <ines.varhol@telecom-paris.fr>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Arnaud Minier" <arnaud.minier@telecom-paris.fr>,
"Paolo Bonzini" <pbonzini@redhat.com>
Subject: [PATCH 4/4] tests/qtest: Check STM32L4x5 clock connections
Date: Tue, 7 May 2024 20:55:41 +0200 [thread overview]
Message-ID: <20240507185854.34572-5-ines.varhol@telecom-paris.fr> (raw)
In-Reply-To: <20240507185854.34572-1-ines.varhol@telecom-paris.fr>
For USART, GPIO and SYSCFG devices, check that clock frequency before
and after enabling the peripheral clock in RCC is correct.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
---
tests/qtest/stm32l4x5.h | 40 +++++++++++++++++++++++++++++
tests/qtest/stm32l4x5_gpio-test.c | 23 +++++++++++++++++
tests/qtest/stm32l4x5_syscfg-test.c | 19 ++++++++++++--
tests/qtest/stm32l4x5_usart-test.c | 26 +++++++++++++++++++
4 files changed, 106 insertions(+), 2 deletions(-)
create mode 100644 tests/qtest/stm32l4x5.h
diff --git a/tests/qtest/stm32l4x5.h b/tests/qtest/stm32l4x5.h
new file mode 100644
index 0000000000..b8ef6698b2
--- /dev/null
+++ b/tests/qtest/stm32l4x5.h
@@ -0,0 +1,40 @@
+/*
+ * QTest testcase header for STM32L4X5 :
+ * used for consolidating common objects in stm32l4x5_*-test.c
+ *
+ * Copyright (c) 2024 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2024 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+
+/*
+ * MSI (4 MHz) is used as system clock source after startup
+ * from Reset.
+ * AHB, APB1 and APB2 prescalers are set to 1 at reset.
+ */
+#define SYSCLK_FREQ_HZ 4000000
+#define RCC_AHB2ENR 0x4002104C
+#define RCC_APB1ENR1 0x40021058
+#define RCC_APB1ENR2 0x4002105C
+#define RCC_APB2ENR 0x40021060
+
+
+static inline uint32_t get_clock_freq_hz(QTestState *qts, const char *path)
+{
+ uint32_t clock_freq_hz = 0;
+ QDict *r;
+
+ r = qtest_qmp(qts, "{ 'execute': 'qom-get', 'arguments':"
+ " { 'path': %s, 'property': 'clock-freq-hz'} }", path);
+ g_assert_false(qdict_haskey(r, "error"));
+ clock_freq_hz = qdict_get_int(r, "return");
+ qobject_unref(r);
+ return clock_freq_hz;
+}
+
+
diff --git a/tests/qtest/stm32l4x5_gpio-test.c b/tests/qtest/stm32l4x5_gpio-test.c
index 72a7823406..5c62125736 100644
--- a/tests/qtest/stm32l4x5_gpio-test.c
+++ b/tests/qtest/stm32l4x5_gpio-test.c
@@ -10,6 +10,7 @@
#include "qemu/osdep.h"
#include "libqtest-single.h"
+#include "stm32l4x5.h"
#define GPIO_BASE_ADDR 0x48000000
#define GPIO_SIZE 0x400
@@ -505,6 +506,26 @@ static void test_bsrr_brr(const void *data)
gpio_writel(gpio, ODR, reset(gpio, ODR));
}
+static void test_clock_enable(void)
+{
+ /*
+ * For each GPIO, enable its clock in RCC
+ * and check that its clock frequency changes to SYSCLK_FREQ_HZ
+ */
+ unsigned int gpio_id;
+
+ for (uint32_t gpio = GPIO_A; gpio <= GPIO_H; gpio += GPIO_B - GPIO_A) {
+ gpio_id = get_gpio_id(gpio);
+ g_autofree char *path = g_strdup_printf("/machine/soc/gpio%c",
+ gpio_id + 'a');
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, path), ==, 0);
+ /* Enable the gpio clock */
+ writel(RCC_AHB2ENR, readl(RCC_AHB2ENR) | (0x1 << gpio_id));
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, path), ==,
+ SYSCLK_FREQ_HZ);
+ }
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -556,6 +577,8 @@ int main(int argc, char **argv)
qtest_add_data_func("stm32l4x5/gpio/test_bsrr_brr2",
test_data(GPIO_D, 0),
test_bsrr_brr);
+ qtest_add_func("stm32l4x5/gpio/test_clock_enable",
+ test_clock_enable);
qtest_start("-machine b-l475e-iot01a");
ret = g_test_run();
diff --git a/tests/qtest/stm32l4x5_syscfg-test.c b/tests/qtest/stm32l4x5_syscfg-test.c
index 506ca08bc2..2ff0d5e9e0 100644
--- a/tests/qtest/stm32l4x5_syscfg-test.c
+++ b/tests/qtest/stm32l4x5_syscfg-test.c
@@ -10,6 +10,7 @@
#include "qemu/osdep.h"
#include "libqtest-single.h"
+#include "stm32l4x5.h"
#define SYSCFG_BASE_ADDR 0x40010000
#define SYSCFG_MEMRMP 0x00
@@ -26,7 +27,8 @@
#define INVALID_ADDR 0x2C
/* SoC forwards GPIOs to SysCfg */
-#define SYSCFG "/machine/soc"
+#define SOC "/machine/soc"
+#define SYSCFG "/machine/soc/syscfg"
#define EXTI "/machine/soc/exti"
static void syscfg_writel(unsigned int offset, uint32_t value)
@@ -41,7 +43,7 @@ static uint32_t syscfg_readl(unsigned int offset)
static void syscfg_set_irq(int num, int level)
{
- qtest_set_irq_in(global_qtest, SYSCFG, NULL, num, level);
+ qtest_set_irq_in(global_qtest, SOC, NULL, num, level);
}
static void system_reset(void)
@@ -301,6 +303,17 @@ static void test_irq_gpio_multiplexer(void)
syscfg_writel(SYSCFG_EXTICR1, 0x00000000);
}
+static void test_clock_enable(void)
+{
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, SYSCFG), ==, 0);
+
+ /* Enable SYSCFG clock */
+ writel(RCC_APB2ENR, readl(RCC_APB2ENR) | (0x1 << 0));
+
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, SYSCFG), ==,
+ SYSCLK_FREQ_HZ);
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -325,6 +338,8 @@ int main(int argc, char **argv)
test_irq_pin_multiplexer);
qtest_add_func("stm32l4x5/syscfg/test_irq_gpio_multiplexer",
test_irq_gpio_multiplexer);
+ qtest_add_func("stm32l4x5/syscfg/test_clock_enable",
+ test_clock_enable);
qtest_start("-machine b-l475e-iot01a");
ret = g_test_run();
diff --git a/tests/qtest/stm32l4x5_usart-test.c b/tests/qtest/stm32l4x5_usart-test.c
index 8902518233..7a5671be99 100644
--- a/tests/qtest/stm32l4x5_usart-test.c
+++ b/tests/qtest/stm32l4x5_usart-test.c
@@ -12,6 +12,7 @@
#include "libqtest.h"
#include "hw/misc/stm32l4x5_rcc_internals.h"
#include "hw/registerfields.h"
+#include "stm32l4x5.h"
#define RCC_BASE_ADDR 0x40021000
/* Use USART 1 ADDR, assume the others work the same */
@@ -296,6 +297,30 @@ static void test_send_str(void)
qtest_quit(qts);
}
+static void check_clock(QTestState *qts, const char *path, uint32_t rcc_reg,
+ uint32_t reg_offset)
+{
+ g_assert_cmpuint(get_clock_freq_hz(qts, path), ==, 0);
+ qtest_writel(qts, rcc_reg, qtest_readl(qts, rcc_reg) | (0x1 << reg_offset));
+ g_assert_cmpuint(get_clock_freq_hz(qts, path), ==, SYSCLK_FREQ_HZ);
+}
+
+static void test_clock_enable(void)
+{
+ /*
+ * For each USART device, enable its clock in RCC
+ * and check that its clock frequency is SYSCLK_FREQ_HZ
+ */
+ QTestState *qts = qtest_init("-M b-l475e-iot01a");
+
+ check_clock(qts, "machine/soc/usart[0]", RCC_APB2ENR, 14);
+ check_clock(qts, "machine/soc/usart[1]", RCC_APB1ENR1, 17);
+ check_clock(qts, "machine/soc/usart[2]", RCC_APB1ENR1, 18);
+ check_clock(qts, "machine/soc/uart[0]", RCC_APB1ENR1, 19);
+ check_clock(qts, "machine/soc/uart[1]", RCC_APB1ENR1, 20);
+ check_clock(qts, "machine/soc/lpuart1", RCC_APB1ENR2, 0);
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -308,6 +333,7 @@ int main(int argc, char **argv)
qtest_add_func("stm32l4x5/usart/send_char", test_send_char);
qtest_add_func("stm32l4x5/usart/receive_str", test_receive_str);
qtest_add_func("stm32l4x5/usart/send_str", test_send_str);
+ qtest_add_func("stm32l4x5/usart/clock_enable", test_clock_enable);
ret = g_test_run();
return ret;
--
2.43.2
next prev parent reply other threads:[~2024-05-07 19:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-07 18:55 [PATCH 0/4] Check clock connection between STM32L4x5 RCC and peripherals Inès Varhol
2024-05-07 18:55 ` [PATCH 1/4] hw/misc: Create STM32L4x5 SYSCFG clock Inès Varhol
2024-05-07 18:55 ` [PATCH 2/4] hw/gpio: Handle clock migration in STM32L4x5 gpios Inès Varhol
2024-05-08 8:26 ` Philippe Mathieu-Daudé
2024-05-07 18:55 ` [PATCH 3/4] hw/char: Add QOM property for STM32L4x5 USART clock frequency Inès Varhol
2024-05-07 18:55 ` Inès Varhol [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-05-05 14:05 [PATCH 0/4] Check clock connection between STM32L4x5 RCC and peripherals Inès Varhol
2024-05-05 14:05 ` [PATCH 4/4] tests/qtest: Check STM32L4x5 clock connections Inès Varhol
2024-05-06 4:16 ` Thomas Huth
2024-05-06 17:57 ` Inès Varhol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240507185854.34572-5-ines.varhol@telecom-paris.fr \
--to=ines.varhol@telecom-paris.fr \
--cc=alistair@alistair23.me \
--cc=arnaud.minier@telecom-paris.fr \
--cc=lvivier@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).