From: Juston Li <juston.h.li@gmail.com>
To: sudipm.mukherjee@gmail.com, teddy.wang@siliconmotion.com,
gregkh@linuxfoundation.org, linux-fbdev@vger.kernel.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
dan.carpenter@oracle.com
Cc: Juston Li <juston.h.li@gmail.com>
Subject: [PATCH v4 14/19] staging: sm750fb: remove trailing whitespace
Date: Mon, 29 Jun 2015 10:55:31 -0700 [thread overview]
Message-ID: <1435600536-13135-14-git-send-email-juston.h.li@gmail.com> (raw)
In-Reply-To: <CAFow2F-+fT0iRmFd+H_X-1gBmvCsgehxXeyr7A8Zk9TtfD0aBA@mail.gmail.com>
Fixes checkpatch.pl error:
ERROR: trailing whitespace
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_dvi.c | 2 +-
drivers/staging/sm750fb/sm750_accel.c | 4 ++--
drivers/staging/sm750fb/sm750_hw.c | 24 ++++++++++++------------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 4c64436..c42db85 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -1,4 +1,4 @@
-#define USE_DVICHIP
+#define USE_DVICHIP
#ifdef USE_DVICHIP
#include "ddk750_help.h"
#include "ddk750_reg.h"
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 2ea447e..866bb99 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -37,7 +37,7 @@ void hw_de_init(struct lynx_accel *accel)
{
/* setup 2d engine registers */
u32 reg, clr;
-
+
write_dpr(accel, DE_MASKS, 0xFFFFFFFF);
/* dpr1c */
@@ -82,7 +82,7 @@ void hw_de_init(struct lynx_accel *accel)
void hw_set2dformat(struct lynx_accel *accel, int fmt)
{
u32 reg;
-
+
/* fmt=0,1,2 for 8,16,32,bpp on sm718/750/502 */
reg = read_dpr(accel, DE_STRETCH_FORMAT);
reg = FIELD_VALUE(reg, DE_STRETCH_FORMAT, PIXEL_FORMAT, fmt);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 4941e2a..3b8107c 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -28,7 +28,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
{
int ret;
struct sm750_share *spec_share;
-
+
spec_share = container_of(share, struct sm750_share, share);
ret = 0;
@@ -60,7 +60,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
-
+
share->accel.dprBase = share->pvReg + DE_BASE_ADDR_TYPE1;
share->accel.dpPortBase = share->pvReg + DE_PORT_ADDR_TYPE1;
@@ -104,7 +104,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
{
struct sm750_share *spec_share;
struct init_status *parm;
-
+
spec_share = container_of(share, struct sm750_share, share);
parm = &spec_share->state.initParm;
if (parm->chip_clk == 0)
@@ -202,7 +202,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
resource_size_t hw_sm750_getVMSize(struct lynx_share *share)
{
resource_size_t ret;
-
+
ret = ddk750_getVMSize();
return ret;
}
@@ -211,7 +211,7 @@ resource_size_t hw_sm750_getVMSize(struct lynx_share *share)
int hw_sm750_output_checkMode(struct lynxfb_output* output, struct fb_var_screeninfo* var)
{
-
+
return 0;
}
@@ -222,7 +222,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
int ret;
disp_output_t dispSet;
int channel;
-
+
ret = 0;
dispSet = 0;
channel = *output->channel;
@@ -259,14 +259,14 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
void hw_sm750_output_clear(struct lynxfb_output* output)
{
-
+
return;
}
int hw_sm750_crtc_checkMode(struct lynxfb_crtc* crtc, struct fb_var_screeninfo* var)
{
struct lynx_share *share;
-
+
share = container_of(crtc, struct lynxfb_par, crtc)->share;
@@ -303,7 +303,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
struct lynx_share *share;
struct lynxfb_par *par;
-
+
ret = 0;
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
@@ -414,7 +414,7 @@ exit:
void hw_sm750_crtc_clear(struct lynxfb_crtc* crtc)
{
-
+
return;
}
@@ -428,7 +428,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int dpms, crtdb;
-
+
switch (blank)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
@@ -483,7 +483,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
{
unsigned int dpms, pps, crtdb;
-
+
dpms = pps = crtdb = 0;
switch (blank)
--
2.4.4
WARNING: multiple messages have this Message-ID (diff)
From: Juston Li <juston.h.li@gmail.com>
To: sudipm.mukherjee@gmail.com, teddy.wang@siliconmotion.com,
gregkh@linuxfoundation.org, linux-fbdev@vger.kernel.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
dan.carpenter@oracle.com
Cc: Juston Li <juston.h.li@gmail.com>
Subject: [PATCH v4 14/19] staging: sm750fb: remove trailing whitespace
Date: Mon, 29 Jun 2015 17:55:31 +0000 [thread overview]
Message-ID: <1435600536-13135-14-git-send-email-juston.h.li@gmail.com> (raw)
In-Reply-To: <CAFow2F-+fT0iRmFd+H_X-1gBmvCsgehxXeyr7A8Zk9TtfD0aBA@mail.gmail.com>
Fixes checkpatch.pl error:
ERROR: trailing whitespace
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_dvi.c | 2 +-
drivers/staging/sm750fb/sm750_accel.c | 4 ++--
drivers/staging/sm750fb/sm750_hw.c | 24 ++++++++++++------------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 4c64436..c42db85 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -1,4 +1,4 @@
-#define USE_DVICHIP
+#define USE_DVICHIP
#ifdef USE_DVICHIP
#include "ddk750_help.h"
#include "ddk750_reg.h"
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 2ea447e..866bb99 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -37,7 +37,7 @@ void hw_de_init(struct lynx_accel *accel)
{
/* setup 2d engine registers */
u32 reg, clr;
-
+
write_dpr(accel, DE_MASKS, 0xFFFFFFFF);
/* dpr1c */
@@ -82,7 +82,7 @@ void hw_de_init(struct lynx_accel *accel)
void hw_set2dformat(struct lynx_accel *accel, int fmt)
{
u32 reg;
-
+
/* fmt=0,1,2 for 8,16,32,bpp on sm718/750/502 */
reg = read_dpr(accel, DE_STRETCH_FORMAT);
reg = FIELD_VALUE(reg, DE_STRETCH_FORMAT, PIXEL_FORMAT, fmt);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 4941e2a..3b8107c 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -28,7 +28,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
{
int ret;
struct sm750_share *spec_share;
-
+
spec_share = container_of(share, struct sm750_share, share);
ret = 0;
@@ -60,7 +60,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
-
+
share->accel.dprBase = share->pvReg + DE_BASE_ADDR_TYPE1;
share->accel.dpPortBase = share->pvReg + DE_PORT_ADDR_TYPE1;
@@ -104,7 +104,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
{
struct sm750_share *spec_share;
struct init_status *parm;
-
+
spec_share = container_of(share, struct sm750_share, share);
parm = &spec_share->state.initParm;
if (parm->chip_clk = 0)
@@ -202,7 +202,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
resource_size_t hw_sm750_getVMSize(struct lynx_share *share)
{
resource_size_t ret;
-
+
ret = ddk750_getVMSize();
return ret;
}
@@ -211,7 +211,7 @@ resource_size_t hw_sm750_getVMSize(struct lynx_share *share)
int hw_sm750_output_checkMode(struct lynxfb_output* output, struct fb_var_screeninfo* var)
{
-
+
return 0;
}
@@ -222,7 +222,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
int ret;
disp_output_t dispSet;
int channel;
-
+
ret = 0;
dispSet = 0;
channel = *output->channel;
@@ -259,14 +259,14 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
void hw_sm750_output_clear(struct lynxfb_output* output)
{
-
+
return;
}
int hw_sm750_crtc_checkMode(struct lynxfb_crtc* crtc, struct fb_var_screeninfo* var)
{
struct lynx_share *share;
-
+
share = container_of(crtc, struct lynxfb_par, crtc)->share;
@@ -303,7 +303,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
struct lynx_share *share;
struct lynxfb_par *par;
-
+
ret = 0;
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
@@ -414,7 +414,7 @@ exit:
void hw_sm750_crtc_clear(struct lynxfb_crtc* crtc)
{
-
+
return;
}
@@ -428,7 +428,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int dpms, crtdb;
-
+
switch (blank)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
@@ -483,7 +483,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
{
unsigned int dpms, pps, crtdb;
-
+
dpms = pps = crtdb = 0;
switch (blank)
--
2.4.4
next prev parent reply other threads:[~2015-06-29 17:56 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-29 17:12 [PATCH v4 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
2015-06-29 17:12 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 01/19] staging: sm750fb: use tabs for indentation Juston Li
2015-06-29 17:55 ` Juston Li
2015-07-15 1:30 ` Greg KH
2015-07-15 1:30 ` Greg KH
2015-06-29 17:55 ` [PATCH v4 02/19] staging: sm750fb: remove spacing after open parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 03/19] staging: sm750fb: remove space before close parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 04/19] staging: sm750fb: add space before open parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 05/19] staging: sm750fb: remove space between function name and parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 06/19] staging: sm750fb: add space before open brace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 07/19] staging: sm750fb: add space after close brace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 08/19] staging: sm750fb: add space after enum definition Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 09/19] staging: sm750fb: add space after struct definition Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 10/19] staging: sm750fb: add space after return type Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 11/19] staging: sm750fb: consistent spacing around operators Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 12/19] staging: sm750fb: add spaces " Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 13/19] staging: sm750fb: add space after semicolon Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` Juston Li [this message]
2015-06-29 17:55 ` [PATCH v4 14/19] staging: sm750fb: remove trailing whitespace Juston Li
2015-06-29 17:55 ` [PATCH v4 15/19] staging: sm750fb: remove unnecessary whitespace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 16/19] staging: sm750fb: fix brace placement Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 17/19] staging: sm750fb: move while to follow do close brace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 18/19] staging: sm750fb: remove unnecessary braces Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 19/19] staging: sm750fb: add missing blank line after declarations Juston Li
2015-06-29 17:55 ` Juston Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435600536-13135-14-git-send-email-juston.h.li@gmail.com \
--to=juston.h.li@gmail.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.