From: Juston Li <juston.h.li@gmail.com>
To: sudipm.mukherjee@gmail.com, teddy.wang@siliconmotion.com,
gregkh@linuxfoundation.org, linux-fbdev@vger.kernel.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
dan.carpenter@oracle.com
Cc: Juston Li <juston.h.li@gmail.com>
Subject: [PATCH v4 19/19] staging: sm750fb: add missing blank line after declarations
Date: Mon, 29 Jun 2015 10:55:36 -0700 [thread overview]
Message-ID: <1435600536-13135-19-git-send-email-juston.h.li@gmail.com> (raw)
In-Reply-To: <CAFow2F-+fT0iRmFd+H_X-1gBmvCsgehxXeyr7A8Zk9TtfD0aBA@mail.gmail.com>
Fixes checkpatch.pl
WARNING: Missing a blank line after declarations
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 1 +
drivers/staging/sm750fb/ddk750_display.c | 2 ++
drivers/staging/sm750fb/ddk750_dvi.c | 1 +
drivers/staging/sm750fb/ddk750_mode.c | 3 +++
drivers/staging/sm750fb/ddk750_power.c | 1 +
drivers/staging/sm750fb/ddk750_sii164.c | 1 +
drivers/staging/sm750fb/sm750_accel.c | 1 +
drivers/staging/sm750fb/sm750_cursor.c | 2 ++
drivers/staging/sm750fb/sm750_hw.c | 7 +++++++
9 files changed, 19 insertions(+)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index d7435d7..5e6798e 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -474,6 +474,7 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
M += (fl_quo*X % 10000) > 5000?1:0;
if (M < 256 && M > 0) {
unsigned int diff;
+
tmpClock = pll->inputFreq * M / N / X;
diff = absDiff(tmpClock, request_orig);
if (diff < miniDiff) {
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index abd6283..8348113 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -121,6 +121,7 @@ static void setDisplayControl(int ctrl, int dispState)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
+
if (!ctrl) {
/* primary controller */
@@ -210,6 +211,7 @@ static void swPanelPowerSequence(int disp, int delay)
void ddk750_setLogicalDispOut(disp_output_t output)
{
unsigned int reg;
+
if (output & PNL_2_USAGE) {
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index a18bb4c..a7a2351 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -43,6 +43,7 @@ int dviInit(
)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
+
pCurrentDviCtrl = g_dcftSupportedDviController;
if (pCurrentDviCtrl->pfnInit != NULL) {
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 9d10446..2399b17 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,6 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
int ret = 0;
int cnt = 0;
unsigned int ulTmpValue, ulReg;
+
if (pll->clockType == SECONDARY_PLL) {
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
@@ -120,6 +121,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
} else if (pll->clockType == PRIMARY_PLL) {
unsigned int ulReservedBits;
+
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
POKE32(PANEL_HORIZONTAL_TOTAL,
@@ -184,6 +186,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
{
pll_value_t pll;
unsigned int uiActualPixelClk;
+
pll.inputFreq = DEFAULT_INPUT_CLOCK;
pll.clockType = clock;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index c545c2d..c8c51be 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,6 +5,7 @@
void ddk750_setDPMS(DPMS_t state)
{
unsigned int value;
+
if (getChipType() == SM750LE) {
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index a5153be..0bdf3db 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -340,6 +340,7 @@ void sii164EnableHotPlugDetection(
)
{
unsigned char detectReg;
+
detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based on each
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 291a47b..b75ffbd 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -152,6 +152,7 @@ unsigned int rop2) /* ROP value */
{
unsigned int nDirection, de_ctrl;
int opSign;
+
nDirection = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
opSign = 1;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index ab61fe6..2400c6c 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -61,6 +61,7 @@ writel((data), cursor->mmio + (addr))
void hw_cursor_enable(struct lynx_cursor *cursor)
{
u32 reg;
+
reg = FIELD_VALUE(0, HWC_ADDRESS, ADDRESS, cursor->offset)|
FIELD_SET(0, HWC_ADDRESS, EXT, LOCAL)|
FIELD_SET(0, HWC_ADDRESS, ENABLE, ENABLE);
@@ -81,6 +82,7 @@ void hw_cursor_setPos(struct lynx_cursor *cursor,
int x, int y)
{
u32 reg;
+
reg = FIELD_VALUE(0, HWC_LOCATION, Y, y)|
FIELD_VALUE(0, HWC_LOCATION, X, x);
POKE32(HWC_LOCATION, reg);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 97a0f63..10f15b5 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -243,6 +243,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
} else {
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
+
reg = PEEK32(DISPLAY_CONTROL_750LE);
reg |= 0xf;
POKE32(DISPLAY_CONTROL_750LE, reg);
@@ -417,6 +418,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
ushort red, ushort green, ushort blue)
{
static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
+
POKE32(add[crtc->channel] + index*4, (red<<16)|(green<<8)|blue);
return 0;
}
@@ -545,6 +547,7 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
void hw_sm750_initAccel(struct lynx_share *share)
{
u32 reg;
+
enable2DEngine(1);
if (getChipType() == SM750LE) {
@@ -574,8 +577,10 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
int i = 0x10000000;
+
while (i--) {
unsigned int dwVal = PEEK32(DE_STATE2);
+
if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) == DE_STATE2_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) == DE_STATE2_DE_MEM_FIFO_EMPTY)) {
@@ -590,8 +595,10 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
int i = 0x10000000;
+
while (i--) {
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
+
if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) == SYSTEM_CTRL_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) == SYSTEM_CTRL_DE_MEM_FIFO_EMPTY)) {
--
2.4.4
WARNING: multiple messages have this Message-ID (diff)
From: Juston Li <juston.h.li@gmail.com>
To: sudipm.mukherjee@gmail.com, teddy.wang@siliconmotion.com,
gregkh@linuxfoundation.org, linux-fbdev@vger.kernel.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
dan.carpenter@oracle.com
Cc: Juston Li <juston.h.li@gmail.com>
Subject: [PATCH v4 19/19] staging: sm750fb: add missing blank line after declarations
Date: Mon, 29 Jun 2015 17:55:36 +0000 [thread overview]
Message-ID: <1435600536-13135-19-git-send-email-juston.h.li@gmail.com> (raw)
In-Reply-To: <CAFow2F-+fT0iRmFd+H_X-1gBmvCsgehxXeyr7A8Zk9TtfD0aBA@mail.gmail.com>
Fixes checkpatch.pl
WARNING: Missing a blank line after declarations
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 1 +
drivers/staging/sm750fb/ddk750_display.c | 2 ++
drivers/staging/sm750fb/ddk750_dvi.c | 1 +
drivers/staging/sm750fb/ddk750_mode.c | 3 +++
drivers/staging/sm750fb/ddk750_power.c | 1 +
drivers/staging/sm750fb/ddk750_sii164.c | 1 +
drivers/staging/sm750fb/sm750_accel.c | 1 +
drivers/staging/sm750fb/sm750_cursor.c | 2 ++
drivers/staging/sm750fb/sm750_hw.c | 7 +++++++
9 files changed, 19 insertions(+)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index d7435d7..5e6798e 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -474,6 +474,7 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
M += (fl_quo*X % 10000) > 5000?1:0;
if (M < 256 && M > 0) {
unsigned int diff;
+
tmpClock = pll->inputFreq * M / N / X;
diff = absDiff(tmpClock, request_orig);
if (diff < miniDiff) {
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index abd6283..8348113 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -121,6 +121,7 @@ static void setDisplayControl(int ctrl, int dispState)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
+
if (!ctrl) {
/* primary controller */
@@ -210,6 +211,7 @@ static void swPanelPowerSequence(int disp, int delay)
void ddk750_setLogicalDispOut(disp_output_t output)
{
unsigned int reg;
+
if (output & PNL_2_USAGE) {
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index a18bb4c..a7a2351 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -43,6 +43,7 @@ int dviInit(
)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
+
pCurrentDviCtrl = g_dcftSupportedDviController;
if (pCurrentDviCtrl->pfnInit != NULL) {
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 9d10446..2399b17 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,6 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
int ret = 0;
int cnt = 0;
unsigned int ulTmpValue, ulReg;
+
if (pll->clockType = SECONDARY_PLL) {
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
@@ -120,6 +121,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
} else if (pll->clockType = PRIMARY_PLL) {
unsigned int ulReservedBits;
+
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
POKE32(PANEL_HORIZONTAL_TOTAL,
@@ -184,6 +186,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
{
pll_value_t pll;
unsigned int uiActualPixelClk;
+
pll.inputFreq = DEFAULT_INPUT_CLOCK;
pll.clockType = clock;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index c545c2d..c8c51be 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,6 +5,7 @@
void ddk750_setDPMS(DPMS_t state)
{
unsigned int value;
+
if (getChipType() = SM750LE) {
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index a5153be..0bdf3db 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -340,6 +340,7 @@ void sii164EnableHotPlugDetection(
)
{
unsigned char detectReg;
+
detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based on each
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 291a47b..b75ffbd 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -152,6 +152,7 @@ unsigned int rop2) /* ROP value */
{
unsigned int nDirection, de_ctrl;
int opSign;
+
nDirection = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
opSign = 1;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index ab61fe6..2400c6c 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -61,6 +61,7 @@ writel((data), cursor->mmio + (addr))
void hw_cursor_enable(struct lynx_cursor *cursor)
{
u32 reg;
+
reg = FIELD_VALUE(0, HWC_ADDRESS, ADDRESS, cursor->offset)|
FIELD_SET(0, HWC_ADDRESS, EXT, LOCAL)|
FIELD_SET(0, HWC_ADDRESS, ENABLE, ENABLE);
@@ -81,6 +82,7 @@ void hw_cursor_setPos(struct lynx_cursor *cursor,
int x, int y)
{
u32 reg;
+
reg = FIELD_VALUE(0, HWC_LOCATION, Y, y)|
FIELD_VALUE(0, HWC_LOCATION, X, x);
POKE32(HWC_LOCATION, reg);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 97a0f63..10f15b5 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -243,6 +243,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
} else {
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
+
reg = PEEK32(DISPLAY_CONTROL_750LE);
reg |= 0xf;
POKE32(DISPLAY_CONTROL_750LE, reg);
@@ -417,6 +418,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
ushort red, ushort green, ushort blue)
{
static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
+
POKE32(add[crtc->channel] + index*4, (red<<16)|(green<<8)|blue);
return 0;
}
@@ -545,6 +547,7 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
void hw_sm750_initAccel(struct lynx_share *share)
{
u32 reg;
+
enable2DEngine(1);
if (getChipType() = SM750LE) {
@@ -574,8 +577,10 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
int i = 0x10000000;
+
while (i--) {
unsigned int dwVal = PEEK32(DE_STATE2);
+
if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) = DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) = DE_STATE2_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) = DE_STATE2_DE_MEM_FIFO_EMPTY)) {
@@ -590,8 +595,10 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
int i = 0x10000000;
+
while (i--) {
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
+
if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) = SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) = SYSTEM_CTRL_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) = SYSTEM_CTRL_DE_MEM_FIFO_EMPTY)) {
--
2.4.4
next prev parent reply other threads:[~2015-06-29 17:56 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-29 17:12 [PATCH v4 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
2015-06-29 17:12 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 01/19] staging: sm750fb: use tabs for indentation Juston Li
2015-06-29 17:55 ` Juston Li
2015-07-15 1:30 ` Greg KH
2015-07-15 1:30 ` Greg KH
2015-06-29 17:55 ` [PATCH v4 02/19] staging: sm750fb: remove spacing after open parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 03/19] staging: sm750fb: remove space before close parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 04/19] staging: sm750fb: add space before open parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 05/19] staging: sm750fb: remove space between function name and parenthesis Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 06/19] staging: sm750fb: add space before open brace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 07/19] staging: sm750fb: add space after close brace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 08/19] staging: sm750fb: add space after enum definition Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 09/19] staging: sm750fb: add space after struct definition Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 10/19] staging: sm750fb: add space after return type Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 11/19] staging: sm750fb: consistent spacing around operators Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 12/19] staging: sm750fb: add spaces " Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 13/19] staging: sm750fb: add space after semicolon Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 14/19] staging: sm750fb: remove trailing whitespace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 15/19] staging: sm750fb: remove unnecessary whitespace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 16/19] staging: sm750fb: fix brace placement Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 17/19] staging: sm750fb: move while to follow do close brace Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` [PATCH v4 18/19] staging: sm750fb: remove unnecessary braces Juston Li
2015-06-29 17:55 ` Juston Li
2015-06-29 17:55 ` Juston Li [this message]
2015-06-29 17:55 ` [PATCH v4 19/19] staging: sm750fb: add missing blank line after declarations Juston Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435600536-13135-19-git-send-email-juston.h.li@gmail.com \
--to=juston.h.li@gmail.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.