From: James Liao <jamesjj.liao@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Heiko Stubner <heiko@sntech.de>
Cc: <srv_heupstream@mediatek.com>,
Daniel Kurtz <djkurtz@chromium.org>,
Ricky Liang <jcliang@chromium.org>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>
Subject: [PATCH v3 0/5] Add Mediatek MT8173 subsystem clocks support
Date: Fri, 10 Jul 2015 18:00:00 +0800 [thread overview]
Message-ID: <1436522405-13923-1-git-send-email-jamesjj.liao@mediatek.com> (raw)
This patchset is based on 4.2-rc1 and [1], and contains subsystem
clocks support for Mediatek MT8173.
There are many different implementation suggestions [2][3] due to
each subsystem HW contains multiple functions, such as clock and
reset controllers.
In this patchset, I still put subsystem clock implementations in
drivers/clk/mediatek, no mater reset controllers may need to implement
in the same directory in the future. That's because many other vendors
also implement clock and reset controllers in drivers/clk, and it looks
like an acceptible way.
This patchset also contains device tree nodes that are needed by
subsystem clocks.
changes since v2:
- Rebase to 4.2-rc1.
- Add device tree nodes for subsystem clocks.
- Fine tune comments of patches.
- Add __init, __initconst and const to init data and functions.
- Removed unused code from init functions of subsystem clocks.
changes since v1:
- Add CA7PLL and CA15PLL as critical clocks.
- Use the same register descriptor for imgsys, vensys and vencltsys.
- Generalize apmixedsys special clocks registration.
[1] https://patchwork.kernel.org/patch/6446341/
[2] https://lkml.org/lkml/2015/5/21/96
[3] https://lkml.org/lkml/2015/6/29/590
James Liao (4):
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock
controllers
clk: mediatek: Add subsystem clocks of MT8173
clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
arm64: dts: mt8173: Add subsystem clock controller device nodes
Sascha Hauer (1):
clk: mediatek: mt8173: Fix enabling of critical clocks
.../bindings/arm/mediatek/mediatek,imgsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,mmsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vdecsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencltsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencsys.txt | 22 ++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 30 ++
drivers/clk/mediatek/clk-mt8173.c | 432 ++++++++++++++++++++-
drivers/clk/mediatek/clk-pll.c | 7 +-
include/dt-bindings/clock/mt8173-clk.h | 94 ++++-
9 files changed, 659 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
--
1.8.1.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: James Liao <jamesjj.liao@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Heiko Stubner <heiko@sntech.de>
Cc: srv_heupstream@mediatek.com, Daniel Kurtz <djkurtz@chromium.org>,
Ricky Liang <jcliang@chromium.org>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org
Subject: [PATCH v3 0/5] Add Mediatek MT8173 subsystem clocks support
Date: Fri, 10 Jul 2015 18:00:00 +0800 [thread overview]
Message-ID: <1436522405-13923-1-git-send-email-jamesjj.liao@mediatek.com> (raw)
This patchset is based on 4.2-rc1 and [1], and contains subsystem
clocks support for Mediatek MT8173.
There are many different implementation suggestions [2][3] due to
each subsystem HW contains multiple functions, such as clock and
reset controllers.
In this patchset, I still put subsystem clock implementations in
drivers/clk/mediatek, no mater reset controllers may need to implement
in the same directory in the future. That's because many other vendors
also implement clock and reset controllers in drivers/clk, and it looks
like an acceptible way.
This patchset also contains device tree nodes that are needed by
subsystem clocks.
changes since v2:
- Rebase to 4.2-rc1.
- Add device tree nodes for subsystem clocks.
- Fine tune comments of patches.
- Add __init, __initconst and const to init data and functions.
- Removed unused code from init functions of subsystem clocks.
changes since v1:
- Add CA7PLL and CA15PLL as critical clocks.
- Use the same register descriptor for imgsys, vensys and vencltsys.
- Generalize apmixedsys special clocks registration.
[1] https://patchwork.kernel.org/patch/6446341/
[2] https://lkml.org/lkml/2015/5/21/96
[3] https://lkml.org/lkml/2015/6/29/590
James Liao (4):
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock
controllers
clk: mediatek: Add subsystem clocks of MT8173
clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
arm64: dts: mt8173: Add subsystem clock controller device nodes
Sascha Hauer (1):
clk: mediatek: mt8173: Fix enabling of critical clocks
.../bindings/arm/mediatek/mediatek,imgsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,mmsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vdecsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencltsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencsys.txt | 22 ++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 30 ++
drivers/clk/mediatek/clk-mt8173.c | 432 ++++++++++++++++++++-
drivers/clk/mediatek/clk-pll.c | 7 +-
include/dt-bindings/clock/mt8173-clk.h | 94 ++++-
9 files changed, 659 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
--
1.8.1.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: jamesjj.liao@mediatek.com (James Liao)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] Add Mediatek MT8173 subsystem clocks support
Date: Fri, 10 Jul 2015 18:00:00 +0800 [thread overview]
Message-ID: <1436522405-13923-1-git-send-email-jamesjj.liao@mediatek.com> (raw)
This patchset is based on 4.2-rc1 and [1], and contains subsystem
clocks support for Mediatek MT8173.
There are many different implementation suggestions [2][3] due to
each subsystem HW contains multiple functions, such as clock and
reset controllers.
In this patchset, I still put subsystem clock implementations in
drivers/clk/mediatek, no mater reset controllers may need to implement
in the same directory in the future. That's because many other vendors
also implement clock and reset controllers in drivers/clk, and it looks
like an acceptible way.
This patchset also contains device tree nodes that are needed by
subsystem clocks.
changes since v2:
- Rebase to 4.2-rc1.
- Add device tree nodes for subsystem clocks.
- Fine tune comments of patches.
- Add __init, __initconst and const to init data and functions.
- Removed unused code from init functions of subsystem clocks.
changes since v1:
- Add CA7PLL and CA15PLL as critical clocks.
- Use the same register descriptor for imgsys, vensys and vencltsys.
- Generalize apmixedsys special clocks registration.
[1] https://patchwork.kernel.org/patch/6446341/
[2] https://lkml.org/lkml/2015/5/21/96
[3] https://lkml.org/lkml/2015/6/29/590
James Liao (4):
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock
controllers
clk: mediatek: Add subsystem clocks of MT8173
clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
arm64: dts: mt8173: Add subsystem clock controller device nodes
Sascha Hauer (1):
clk: mediatek: mt8173: Fix enabling of critical clocks
.../bindings/arm/mediatek/mediatek,imgsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,mmsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vdecsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencltsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencsys.txt | 22 ++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 30 ++
drivers/clk/mediatek/clk-mt8173.c | 432 ++++++++++++++++++++-
drivers/clk/mediatek/clk-pll.c | 7 +-
include/dt-bindings/clock/mt8173-clk.h | 94 ++++-
9 files changed, 659 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
--
1.8.1.1.dirty
next reply other threads:[~2015-07-10 10:00 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-10 10:00 James Liao [this message]
2015-07-10 10:00 ` [PATCH v3 0/5] Add Mediatek MT8173 subsystem clocks support James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` [PATCH v3 1/5] clk: mediatek: mt8173: Fix enabling of critical clocks James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` [PATCH v3 2/5] dt-bindings: ARM: Mediatek: Document devicetree bindings for clock controllers James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` [PATCH v3 3/5] clk: mediatek: Add subsystem clocks of MT8173 James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` [PATCH v3 4/5] clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` James Liao
2015-07-13 14:46 ` Daniel Kurtz
2015-07-13 14:46 ` Daniel Kurtz
2015-07-13 14:46 ` Daniel Kurtz
2015-07-14 2:45 ` James Liao
2015-07-14 2:45 ` James Liao
2015-07-14 2:45 ` James Liao
2015-07-14 3:23 ` Daniel Kurtz
2015-07-14 3:23 ` Daniel Kurtz
2015-07-14 3:23 ` Daniel Kurtz
2015-07-14 9:46 ` James Liao
2015-07-14 9:46 ` James Liao
2015-07-14 9:46 ` James Liao
2015-07-14 10:15 ` Daniel Kurtz
2015-07-14 10:15 ` Daniel Kurtz
2015-07-14 10:15 ` Daniel Kurtz
2015-07-10 10:00 ` [PATCH v3 5/5] arm64: dts: mt8173: Add subsystem clock controller device nodes James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 10:00 ` James Liao
2015-07-10 15:02 ` Daniel Kurtz
2015-07-10 15:58 ` Matthias Brugger
2015-07-10 15:58 ` Matthias Brugger
2015-07-13 3:34 ` James Liao
2015-07-13 3:34 ` James Liao
2015-07-13 3:34 ` James Liao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436522405-13923-1-git-send-email-jamesjj.liao@mediatek.com \
--to=jamesjj.liao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=djkurtz@chromium.org \
--cc=heiko@sntech.de \
--cc=jcliang@chromium.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.