From: Timur Tabi <timur@codeaurora.org> To: fu.wei@linaro.org, Suravee.Suthikulpanit@amd.com, linaro-acpi@lists.linaro.org, linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org Cc: tekkamanninja@gmail.com, graeme.gregory@linaro.org, al.stone@linaro.org, hanjun.guo@linaro.org, ashwin.chaugule@linaro.org, arnd@arndb.de, linux@roeck-us.net, vgandhi@codeaurora.org, wim@iguana.be, jcm@redhat.com, leo.duran@amd.com, corbet@lwn.net, mark.rutland@arm.com, catalin.marinas@arm.com, will.deacon@arm.com, rjw@rjwysocki.net Subject: Re: [PATCH v4 5/7] Watchdog: introduce ARM SBSA watchdog driver Date: Tue, 02 Jun 2015 10:32:37 -0500 [thread overview] Message-ID: <556DCC95.806@codeaurora.org> (raw) In-Reply-To: <1433217907-928-6-git-send-email-fu.wei@linaro.org> On 06/01/2015 11:05 PM, fu.wei@linaro.org wrote: > +/* > + * help functions for accessing 32bit registers of SBSA Generic Watchdog > + */ > +static void sbsa_gwdt_cf_write(unsigned int reg, u32 val, > + struct watchdog_device *wdd) > +{ > + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); > + > + writel_relaxed(val, gwdt->control_base + reg); > +} > + > +static void sbsa_gwdt_rf_write(unsigned int reg, u32 val, > + struct watchdog_device *wdd) > +{ > + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); > + > + writel_relaxed(val, gwdt->refresh_base + reg); > +} > + > +static u32 sbsa_gwdt_cf_read(unsigned int reg, struct watchdog_device *wdd) > +{ > + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); > + > + return readl_relaxed(gwdt->control_base + reg); > +} I still think you should get rid of these functions and just call readl_relaxed() and writel_relaxed() every time, but I won't complain again if you keep them. > +static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id) > +{ > + struct sbsa_gwdt *gwdt = (struct sbsa_gwdt *)dev_id; > + struct watchdog_device *wdd = &gwdt->wdd; > + > + if (wdd->pretimeout) > + /* The pretimeout is valid, go panic */ > + panic("SBSA Watchdog pre-timeout"); > + else > + /* We don't use pretimeout, trigger WS1 now*/ > + sbsa_gwdt_set_wcv(wdd, 0); I don't like this. The triggering of the hardware reset should never depend on an interrupt being handled properly. You should always program WCV correctly in advance. This is especially true since pre-timeout will probably rarely be used. So what happens if the CPU is totally hung and this interrupt handler is never called? When will the timeout occur? > +static int sbsa_gwdt_probe(struct platform_device *pdev) > +{ > + u64 first_period_max = U64_MAX; > + struct device *dev = &pdev->dev; > + struct watchdog_device *wdd; > + struct sbsa_gwdt *gwdt; > + struct resource *res; > + void *rf_base, *cf_base; > + int ret, irq; > + u32 status; > + > + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL); > + if (!gwdt) > + return -ENOMEM; > + platform_set_drvdata(pdev, gwdt); You should probably do this *after* calling platform_get_irq_byname(). > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "refresh"); > + rf_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(rf_base)) > + return PTR_ERR(rf_base); > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control"); > + cf_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(cf_base)) > + return PTR_ERR(cf_base); > + > + irq = platform_get_irq_byname(pdev, "ws0"); > + if (irq < 0) { > + dev_err(dev, "unable to get ws0 interrupt.\n"); > + return irq; > + } > + > + /* > + * Get the frequency of system counter from the cp15 interface of ARM > + * Generic timer. We don't need to check it, because if it returns "0", > + * system would panic in very early stage. > + */ > + gwdt->clk = arch_timer_get_cntfrq(); > + gwdt->refresh_base = rf_base; > + gwdt->control_base = cf_base; > + > + wdd = &gwdt->wdd; > + wdd->parent = dev; > + wdd->info = &sbsa_gwdt_info; > + wdd->ops = &sbsa_gwdt_ops; > + watchdog_set_drvdata(wdd, gwdt); > + watchdog_set_nowayout(wdd, nowayout); > + > + wdd->min_pretimeout = 0; > + wdd->max_pretimeout = U32_MAX / gwdt->clk; > + wdd->min_timeout = 1; > + do_div(first_period_max, gwdt->clk); > + wdd->max_timeout = first_period_max; > + > + wdd->pretimeout = DEFAULT_PRETIMEOUT; > + wdd->timeout = DEFAULT_TIMEOUT; > + watchdog_init_timeouts(wdd, pretimeout, timeout, dev); > + > + status = sbsa_gwdt_cf_read(SBSA_GWDT_WCS, wdd); > + if (status & SBSA_GWDT_WCS_WS1) { > + dev_warn(dev, "System reset by WDT(WCV: %llx)\n", > + sbsa_gwdt_get_wcv(wdd)); "System was previously reset via watchdog" is much clearer. > + wdd->bootstatus |= WDIOF_CARDRESET; > + } > + /* Check if watchdog is already enabled */ > + if (status & SBSA_GWDT_WCS_EN) { > + dev_warn(dev, "already enabled!\n"); "watchdog is already enabled". Never use exclamation marks in kernel messages. > + sbsa_gwdt_keepalive(wdd); > + } > + > + /* update pretimeout to WOR */ > + sbsa_gwdt_set_pretimeout(wdd, wdd->pretimeout); > + > + ret = devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0, > + pdev->name, gwdt); > + if (ret) { > + dev_err(dev, "unable to request IRQ %d\n", irq); > + return ret; > + } > + > + ret = watchdog_register_device(wdd); > + if (ret) > + return ret; > + > + dev_info(dev, "Initialized with %ds timeout, %ds pretimeout @ %u Hz\n", > + wdd->timeout, wdd->pretimeout, gwdt->clk); if (wdd->pretimeout) "watchdog initialized to %us timeout and %us pre-timeout at %u Hz\n", wdd->timeout, wdd->pretimeout, gwdt->clk else "watchdog initialized to %us timeout at %u Hz\n", wdd->timeout, gwdt->clk I think it's unlikely that users will use pre-timeout, so your code should treat pre-timeout as a special case, not the normal usage. -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
WARNING: multiple messages have this Message-ID (diff)
From: Timur Tabi <timur-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> To: fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, Suravee.Suthikulpanit-5C7GfCeVMHo@public.gmane.org, linaro-acpi-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: tekkamanninja-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, graeme.gregory-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, al.stone-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, hanjun.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, ashwin.chaugule-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, arnd-r2nGTMty4D4@public.gmane.org, linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org, vgandhi-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org, jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org, leo.duran-5C7GfCeVMHo@public.gmane.org, corbet-T1hC0tSOHrs@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org Subject: Re: [PATCH v4 5/7] Watchdog: introduce ARM SBSA watchdog driver Date: Tue, 02 Jun 2015 10:32:37 -0500 [thread overview] Message-ID: <556DCC95.806@codeaurora.org> (raw) In-Reply-To: <1433217907-928-6-git-send-email-fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> On 06/01/2015 11:05 PM, fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org wrote: > +/* > + * help functions for accessing 32bit registers of SBSA Generic Watchdog > + */ > +static void sbsa_gwdt_cf_write(unsigned int reg, u32 val, > + struct watchdog_device *wdd) > +{ > + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); > + > + writel_relaxed(val, gwdt->control_base + reg); > +} > + > +static void sbsa_gwdt_rf_write(unsigned int reg, u32 val, > + struct watchdog_device *wdd) > +{ > + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); > + > + writel_relaxed(val, gwdt->refresh_base + reg); > +} > + > +static u32 sbsa_gwdt_cf_read(unsigned int reg, struct watchdog_device *wdd) > +{ > + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); > + > + return readl_relaxed(gwdt->control_base + reg); > +} I still think you should get rid of these functions and just call readl_relaxed() and writel_relaxed() every time, but I won't complain again if you keep them. > +static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id) > +{ > + struct sbsa_gwdt *gwdt = (struct sbsa_gwdt *)dev_id; > + struct watchdog_device *wdd = &gwdt->wdd; > + > + if (wdd->pretimeout) > + /* The pretimeout is valid, go panic */ > + panic("SBSA Watchdog pre-timeout"); > + else > + /* We don't use pretimeout, trigger WS1 now*/ > + sbsa_gwdt_set_wcv(wdd, 0); I don't like this. The triggering of the hardware reset should never depend on an interrupt being handled properly. You should always program WCV correctly in advance. This is especially true since pre-timeout will probably rarely be used. So what happens if the CPU is totally hung and this interrupt handler is never called? When will the timeout occur? > +static int sbsa_gwdt_probe(struct platform_device *pdev) > +{ > + u64 first_period_max = U64_MAX; > + struct device *dev = &pdev->dev; > + struct watchdog_device *wdd; > + struct sbsa_gwdt *gwdt; > + struct resource *res; > + void *rf_base, *cf_base; > + int ret, irq; > + u32 status; > + > + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL); > + if (!gwdt) > + return -ENOMEM; > + platform_set_drvdata(pdev, gwdt); You should probably do this *after* calling platform_get_irq_byname(). > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "refresh"); > + rf_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(rf_base)) > + return PTR_ERR(rf_base); > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control"); > + cf_base = devm_ioremap_resource(dev, res); > + if (IS_ERR(cf_base)) > + return PTR_ERR(cf_base); > + > + irq = platform_get_irq_byname(pdev, "ws0"); > + if (irq < 0) { > + dev_err(dev, "unable to get ws0 interrupt.\n"); > + return irq; > + } > + > + /* > + * Get the frequency of system counter from the cp15 interface of ARM > + * Generic timer. We don't need to check it, because if it returns "0", > + * system would panic in very early stage. > + */ > + gwdt->clk = arch_timer_get_cntfrq(); > + gwdt->refresh_base = rf_base; > + gwdt->control_base = cf_base; > + > + wdd = &gwdt->wdd; > + wdd->parent = dev; > + wdd->info = &sbsa_gwdt_info; > + wdd->ops = &sbsa_gwdt_ops; > + watchdog_set_drvdata(wdd, gwdt); > + watchdog_set_nowayout(wdd, nowayout); > + > + wdd->min_pretimeout = 0; > + wdd->max_pretimeout = U32_MAX / gwdt->clk; > + wdd->min_timeout = 1; > + do_div(first_period_max, gwdt->clk); > + wdd->max_timeout = first_period_max; > + > + wdd->pretimeout = DEFAULT_PRETIMEOUT; > + wdd->timeout = DEFAULT_TIMEOUT; > + watchdog_init_timeouts(wdd, pretimeout, timeout, dev); > + > + status = sbsa_gwdt_cf_read(SBSA_GWDT_WCS, wdd); > + if (status & SBSA_GWDT_WCS_WS1) { > + dev_warn(dev, "System reset by WDT(WCV: %llx)\n", > + sbsa_gwdt_get_wcv(wdd)); "System was previously reset via watchdog" is much clearer. > + wdd->bootstatus |= WDIOF_CARDRESET; > + } > + /* Check if watchdog is already enabled */ > + if (status & SBSA_GWDT_WCS_EN) { > + dev_warn(dev, "already enabled!\n"); "watchdog is already enabled". Never use exclamation marks in kernel messages. > + sbsa_gwdt_keepalive(wdd); > + } > + > + /* update pretimeout to WOR */ > + sbsa_gwdt_set_pretimeout(wdd, wdd->pretimeout); > + > + ret = devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0, > + pdev->name, gwdt); > + if (ret) { > + dev_err(dev, "unable to request IRQ %d\n", irq); > + return ret; > + } > + > + ret = watchdog_register_device(wdd); > + if (ret) > + return ret; > + > + dev_info(dev, "Initialized with %ds timeout, %ds pretimeout @ %u Hz\n", > + wdd->timeout, wdd->pretimeout, gwdt->clk); if (wdd->pretimeout) "watchdog initialized to %us timeout and %us pre-timeout at %u Hz\n", wdd->timeout, wdd->pretimeout, gwdt->clk else "watchdog initialized to %us timeout at %u Hz\n", wdd->timeout, gwdt->clk I think it's unlikely that users will use pre-timeout, so your code should treat pre-timeout as a special case, not the normal usage. -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project. -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-06-02 15:32 UTC|newest] Thread overview: 550+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <=fu.wei@linaro.org> 2015-05-15 11:08 ` [PATCH 0/6] Watchdog: introdouce ARM SBSA watchdog driver fu.wei 2015-05-15 11:08 ` [PATCH 1/6] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-05-15 14:06 ` Arnd Bergmann 2015-05-15 14:06 ` Arnd Bergmann 2015-05-15 14:14 ` Fu Wei 2015-05-15 14:14 ` Fu Wei 2015-05-16 10:29 ` Fu Wei 2015-05-16 10:29 ` Fu Wei 2015-05-15 11:08 ` [PATCH 2/6] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-05-15 11:08 ` [PATCH 3/6] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-05-15 11:08 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-15 14:07 ` [Linaro-acpi] [PATCH 0/6] Watchdog: introdouce ARM SBSA watchdog driver Arnd Bergmann 2015-05-15 14:07 ` Arnd Bergmann 2015-05-16 10:33 ` Fu Wei 2015-05-16 10:33 ` Fu Wei 2015-05-15 11:24 ` [PATCH 4/6] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-05-15 11:24 ` [PATCH 5/6] Watchdog: introdouce ARM SBSA watchdog driver fu.wei 2015-05-15 13:57 ` Arnd Bergmann 2015-05-16 12:01 ` Fu Wei 2015-05-16 12:01 ` Fu Wei 2015-05-16 12:26 ` Timur Tabi 2015-05-15 22:57 ` Guenter Roeck 2015-05-15 22:57 ` Guenter Roeck 2015-05-18 17:38 ` Fu Wei 2015-05-18 17:38 ` Fu Wei 2015-05-15 11:24 ` [PATCH 6/6] ACPI: import watchdog info of GTDT into platform device fu.wei 2015-05-15 13:33 ` [PATCH 4/6] Watchdog: introdouce "pretimeout" into framework Guenter Roeck 2015-05-15 13:49 ` Fu Wei 2015-05-15 13:55 ` Timur Tabi 2015-05-15 13:55 ` Timur Tabi 2015-05-15 17:59 ` Guenter Roeck 2015-05-15 18:01 ` Guenter Roeck 2015-05-15 18:01 ` Guenter Roeck 2015-05-18 17:22 ` Fu Wei 2015-05-18 17:22 ` Fu Wei 2015-05-15 14:04 ` Arnd Bergmann 2015-05-18 17:19 ` Fu Wei 2015-05-18 17:19 ` Fu Wei 2015-05-18 17:23 ` Guenter Roeck 2015-05-18 17:39 ` Fu Wei 2015-05-18 20:03 ` Arnd Bergmann 2015-05-18 20:14 ` Guenter Roeck 2015-05-18 20:14 ` Guenter Roeck 2015-05-19 1:12 ` Fu Wei 2015-05-19 1:12 ` Fu Wei 2015-05-21 8:32 ` [PATCH v2 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-05-21 8:32 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-21 8:32 ` [PATCH v2 1/7] clocksource: export "arch_timer_get_rate" for the other drivers fu.wei 2015-05-21 8:32 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-22 14:02 ` Hanjun Guo 2015-05-22 14:09 ` Timur Tabi 2015-05-22 15:16 ` Guenter Roeck 2015-05-22 16:22 ` Timur Tabi 2015-05-21 8:32 ` [PATCH v2 2/7] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-05-21 8:32 ` [PATCH v2 3/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-05-21 8:45 ` Arnd Bergmann 2015-05-21 8:49 ` Fu Wei 2015-05-21 8:49 ` Fu Wei 2015-05-21 8:32 ` [PATCH v2 4/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-05-21 20:33 ` Suravee Suthikulpanit 2015-05-21 20:33 ` Suravee Suthikulpanit 2015-05-21 8:32 ` [PATCH v2 5/7] Watchdog: introduce "pretimeout" into framework fu.wei 2015-05-21 9:04 ` Guenter Roeck 2015-05-21 10:05 ` Fu Wei 2015-05-21 10:05 ` Fu Wei 2015-05-21 10:17 ` Guenter Roeck 2015-05-21 10:50 ` Fu Wei 2015-05-21 10:50 ` Fu Wei 2015-05-21 13:28 ` Guenter Roeck 2015-05-21 10:11 ` Guenter Roeck 2015-05-21 15:32 ` Guenter Roeck 2015-05-21 15:32 ` Guenter Roeck 2015-05-22 5:17 ` Fu Wei 2015-05-25 3:09 ` Fu Wei 2015-05-25 3:09 ` Fu Wei 2015-05-22 6:30 ` Timo Kokkonen 2015-05-22 8:23 ` Fu Wei 2015-05-22 8:59 ` Timo Kokkonen 2015-05-22 10:46 ` Fu Wei 2015-05-22 10:46 ` Fu Wei 2015-05-22 12:14 ` Timo Kokkonen 2015-05-22 13:37 ` Guenter Roeck 2015-05-22 13:23 ` Guenter Roeck 2015-05-22 14:38 ` Fu Wei 2015-05-22 14:38 ` Fu Wei 2015-05-22 15:05 ` Guenter Roeck 2015-05-24 16:17 ` Fu Wei 2015-05-21 8:32 ` [PATCH v2 6/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-05-21 8:32 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-21 10:34 ` Guenter Roeck 2015-05-21 10:34 ` Guenter Roeck 2015-05-21 11:08 ` Fu Wei 2015-05-21 15:18 ` Guenter Roeck 2015-05-21 15:18 ` Guenter Roeck 2015-05-21 15:46 ` Fu Wei 2015-05-21 15:59 ` Guenter Roeck 2015-05-21 16:12 ` Fu Wei 2015-05-21 16:12 ` Fu Wei 2015-05-21 16:33 ` Timur Tabi 2015-05-21 16:33 ` Timur Tabi 2015-05-22 5:05 ` Fu Wei 2015-05-22 5:05 ` Fu Wei 2015-05-21 13:09 ` Timur Tabi 2015-05-21 15:28 ` Guenter Roeck 2015-05-21 15:28 ` Guenter Roeck 2015-05-25 3:43 ` Fu Wei 2015-05-25 3:43 ` Fu Wei 2015-05-25 3:46 ` Timur Tabi 2015-05-25 3:46 ` Timur Tabi 2015-05-25 4:11 ` Fu Wei 2015-05-25 4:11 ` Fu Wei 2015-05-21 15:42 ` Timur Tabi 2015-05-21 15:42 ` Timur Tabi 2015-05-23 16:28 ` Fu Wei 2015-05-23 16:50 ` Fu Wei 2015-05-23 19:40 ` Timur Tabi 2015-05-23 19:40 ` Timur Tabi 2015-05-23 20:01 ` Guenter Roeck 2015-05-23 20:01 ` Guenter Roeck 2015-05-23 20:27 ` Timur Tabi 2015-05-23 20:27 ` Timur Tabi 2015-05-23 20:44 ` Guenter Roeck 2015-05-24 10:50 ` Fu Wei 2015-05-24 10:15 ` Fu Wei 2015-05-24 14:15 ` Guenter Roeck 2015-05-24 14:15 ` Guenter Roeck 2015-05-24 15:50 ` Fu Wei 2015-05-24 15:50 ` Fu Wei 2015-05-24 16:23 ` Guenter Roeck 2015-05-24 16:47 ` Fu Wei 2015-05-24 16:58 ` Guenter Roeck 2015-05-24 16:58 ` Guenter Roeck 2015-05-24 17:04 ` Fu Wei 2015-05-24 17:04 ` Fu Wei 2015-05-24 15:02 ` Timur Tabi 2015-05-24 16:04 ` Fu Wei 2015-05-24 16:04 ` Fu Wei 2015-05-24 16:13 ` Timur Tabi 2015-05-24 16:13 ` Timur Tabi 2015-05-24 16:29 ` Guenter Roeck 2015-05-24 16:29 ` Guenter Roeck 2015-05-24 16:33 ` Fu Wei 2015-05-24 16:44 ` Timur Tabi 2015-05-24 16:50 ` Guenter Roeck 2015-05-24 16:52 ` Fu Wei 2015-05-24 17:19 ` Timur Tabi 2015-05-24 17:19 ` Timur Tabi 2015-05-24 17:23 ` Fu Wei 2015-05-24 17:32 ` Guenter Roeck 2015-05-24 17:32 ` Guenter Roeck 2015-05-24 17:47 ` Timur Tabi 2015-05-25 2:03 ` Fu Wei 2015-05-25 2:00 ` Fu Wei 2015-05-24 16:29 ` Fu Wei 2015-05-22 14:50 ` Hanjun Guo 2015-05-22 14:50 ` Hanjun Guo 2015-05-22 14:55 ` Arnd Bergmann 2015-05-22 15:01 ` Guenter Roeck 2015-05-22 15:01 ` Guenter Roeck 2015-05-22 15:18 ` Hanjun Guo 2015-05-22 15:18 ` Hanjun Guo 2015-05-22 15:24 ` [Linaro-acpi] " Arnd Bergmann 2015-05-22 15:24 ` Arnd Bergmann 2015-05-22 16:19 ` Timur Tabi 2015-05-22 20:13 ` Arnd Bergmann 2015-05-22 20:17 ` Timur Tabi 2015-05-23 7:25 ` Fu Wei 2015-05-23 7:25 ` Fu Wei 2015-05-22 16:19 ` Timur Tabi 2015-05-23 14:47 ` Fu Wei 2015-05-22 16:18 ` Timur Tabi 2015-05-23 15:08 ` Timur Tabi 2015-05-23 15:08 ` Timur Tabi 2015-05-23 17:26 ` Fu Wei 2015-05-23 18:35 ` Guenter Roeck 2015-05-23 18:37 ` Timur Tabi 2015-05-23 19:03 ` Fu Wei 2015-05-23 19:51 ` Guenter Roeck 2015-05-24 9:58 ` Fu Wei 2015-05-24 14:06 ` Guenter Roeck 2015-05-24 14:06 ` Guenter Roeck 2015-05-24 15:06 ` Timur Tabi 2015-05-24 15:06 ` Timur Tabi 2015-05-24 15:37 ` Fu Wei 2015-05-24 15:37 ` Fu Wei 2015-05-23 18:40 ` Timur Tabi 2015-05-23 19:14 ` Fu Wei 2015-05-23 19:14 ` Fu Wei 2015-05-23 19:21 ` Timur Tabi 2015-05-21 8:32 ` [PATCH v2 7/7] ACPI: import watchdog info of GTDT into platform device fu.wei 2015-05-22 15:38 ` Hanjun Guo 2015-05-22 15:38 ` Hanjun Guo 2015-05-23 19:46 ` Timur Tabi 2015-05-23 19:46 ` Timur Tabi 2015-05-21 8:46 ` [Linaro-acpi] [PATCH v2 0/7] Watchdog: introduce ARM SBSA watchdog driver Arnd Bergmann 2015-05-21 8:46 ` Arnd Bergmann 2015-05-21 9:01 ` Fu Wei 2015-05-21 9:01 ` Fu Wei 2015-05-21 20:36 ` Suravee Suthikulpanit 2015-05-21 20:36 ` Suravee Suthikulpanit 2015-05-22 5:08 ` Fu Wei 2015-05-25 10:03 ` [PATCH v3 0/6] " fu.wei 2015-05-25 10:03 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-25 10:03 ` [PATCH v3 1/6] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-05-25 10:03 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-25 10:03 ` [PATCH v3 2/6] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-05-25 10:03 ` [PATCH v3 3/6] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-05-25 10:03 ` [PATCH v3 4/6] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-05-25 19:28 ` Guenter Roeck 2015-05-25 19:28 ` Guenter Roeck 2015-05-25 10:03 ` [PATCH v3 5/6] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-05-25 19:39 ` Guenter Roeck 2015-05-25 19:39 ` Guenter Roeck 2015-05-29 9:11 ` Fu Wei 2015-05-29 9:11 ` Fu Wei 2015-05-29 14:54 ` Guenter Roeck 2015-05-29 15:05 ` Fu Wei 2015-05-26 16:50 ` Timur Tabi 2015-05-29 10:17 ` Fu Wei 2015-05-29 10:17 ` Fu Wei 2015-05-29 13:28 ` Timur Tabi 2015-05-29 13:28 ` Timur Tabi 2015-05-29 14:32 ` Fu Wei 2015-05-29 14:32 ` Fu Wei 2015-05-29 15:46 ` Timur Tabi 2015-05-29 15:46 ` Timur Tabi 2015-05-29 17:53 ` Fu Wei 2015-05-29 18:27 ` Timur Tabi 2015-05-29 18:27 ` Timur Tabi 2015-05-29 22:10 ` Guenter Roeck 2015-05-29 22:10 ` Guenter Roeck 2015-06-01 7:50 ` Fu Wei 2015-05-25 10:03 ` [PATCH v3 6/6] ACPI: import watchdog info of GTDT into platform device fu.wei 2015-05-26 8:28 ` Hanjun Guo 2015-05-26 16:35 ` Timur Tabi 2015-05-26 18:24 ` Guenter Roeck 2015-05-26 18:24 ` Guenter Roeck 2015-05-27 3:01 ` Hanjun Guo 2015-05-27 3:08 ` Timur Tabi 2015-05-27 3:08 ` Timur Tabi 2015-05-26 12:28 ` Will Deacon 2015-05-26 12:28 ` Will Deacon 2015-05-26 15:02 ` Ashwin Chaugule 2015-05-26 15:02 ` Ashwin Chaugule 2015-05-26 15:18 ` Will Deacon 2015-05-26 15:18 ` Will Deacon 2015-05-26 15:35 ` Ashwin Chaugule 2015-05-26 15:35 ` Ashwin Chaugule 2015-05-26 15:35 ` Ashwin Chaugule 2015-05-26 15:36 ` Guenter Roeck 2015-05-26 15:36 ` Guenter Roeck 2015-05-26 16:27 ` Fu Wei 2015-05-26 16:27 ` Fu Wei 2015-05-27 10:44 ` Will Deacon 2015-05-27 10:44 ` Will Deacon 2015-05-29 11:13 ` Fu Wei 2015-05-29 11:13 ` Fu Wei 2015-06-02 4:05 ` [PATCH v4 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-02 4:05 ` [PATCH v4 1/7] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-02 4:05 ` [PATCH v4 2/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-02 4:05 ` [PATCH v4 3/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-02 4:05 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-02 4:05 ` [PATCH v4 4/7] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-06-02 4:05 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-02 16:12 ` Guenter Roeck 2015-06-02 16:12 ` Guenter Roeck 2015-06-08 16:44 ` Fu Wei 2015-06-02 4:05 ` [PATCH v4 5/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-02 4:05 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-02 15:32 ` Timur Tabi [this message] 2015-06-02 15:32 ` Timur Tabi 2015-06-02 15:37 ` Guenter Roeck 2015-06-02 15:37 ` Guenter Roeck 2015-06-02 16:55 ` Fu Wei 2015-06-02 16:55 ` Fu Wei 2015-06-02 17:07 ` Guenter Roeck 2015-06-02 17:07 ` Guenter Roeck 2015-06-08 16:05 ` Fu Wei 2015-06-08 16:05 ` Fu Wei 2015-06-08 18:26 ` Guenter Roeck 2015-06-08 18:26 ` Guenter Roeck 2015-06-09 3:59 ` Fu Wei 2015-06-09 4:37 ` Guenter Roeck 2015-06-09 4:37 ` Guenter Roeck 2015-06-09 6:37 ` Fu Wei 2015-06-09 6:37 ` Fu Wei 2015-06-09 8:04 ` Guenter Roeck 2015-06-09 8:04 ` Guenter Roeck 2015-06-09 10:46 ` Fu Wei 2015-06-09 16:22 ` Guenter Roeck 2015-06-09 16:29 ` Timur Tabi 2015-06-09 16:29 ` Timur Tabi 2015-06-09 16:45 ` Guenter Roeck 2015-06-09 16:53 ` Timur Tabi 2015-06-09 16:53 ` Timur Tabi 2015-06-10 3:41 ` Fu Wei 2015-06-10 3:41 ` Fu Wei 2015-06-10 4:20 ` Fu Wei 2015-06-10 14:22 ` Timur Tabi 2015-06-10 14:22 ` Timur Tabi 2015-06-10 14:36 ` Fu Wei 2015-06-10 14:36 ` Fu Wei 2015-06-10 14:41 ` Fu Wei 2015-06-10 14:41 ` Fu Wei 2015-06-10 14:41 ` Fu Wei 2015-06-10 15:38 ` Fu Wei 2015-06-10 15:38 ` Fu Wei 2015-06-10 17:54 ` Fu Wei 2015-06-10 17:54 ` Fu Wei 2015-06-11 0:22 ` Timur Tabi 2015-06-11 0:22 ` Timur Tabi 2015-06-11 3:00 ` Fu Wei 2015-06-11 3:45 ` Timur Tabi 2015-06-11 3:45 ` Timur Tabi 2015-06-11 5:13 ` Guenter Roeck 2015-06-11 5:13 ` Guenter Roeck 2015-06-11 5:33 ` Fu Wei 2015-06-11 5:32 ` Fu Wei 2015-06-11 5:32 ` Fu Wei 2015-06-02 17:21 ` Timur Tabi 2015-06-02 17:21 ` Timur Tabi 2015-06-03 18:16 ` Timur Tabi 2015-06-03 18:16 ` Timur Tabi 2015-06-03 18:25 ` Guenter Roeck 2015-06-03 18:25 ` Guenter Roeck 2015-06-03 18:53 ` Timur Tabi 2015-06-03 18:53 ` Timur Tabi 2015-06-03 19:29 ` Arnd Bergmann 2015-09-10 22:45 ` Jon Masters 2015-09-14 4:21 ` Pratyush Anand 2015-09-14 15:27 ` Fu Wei 2015-09-14 15:27 ` Fu Wei 2015-09-14 8:51 ` Catalin Marinas 2015-09-15 3:16 ` Fu Wei 2015-09-15 3:16 ` Fu Wei 2015-06-08 16:10 ` Fu Wei 2015-06-02 4:05 ` [PATCH v4 6/7] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-02 4:05 ` [PATCH v4 7/7] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-10 13:41 ` [PATCH v5 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-10 13:41 ` [PATCH v5 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-06-10 16:21 ` Guenter Roeck 2015-06-10 16:21 ` Guenter Roeck 2015-06-11 11:22 ` Fu Wei 2015-06-11 16:38 ` Guenter Roeck 2015-06-11 16:38 ` Guenter Roeck 2015-06-10 13:41 ` [PATCH v5 5/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-10 17:47 ` [PATCH non-pretimeout 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 17:47 ` [PATCH non-pretimeout 1/7] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 17:47 ` [PATCH non-pretimeout 2/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-10 17:47 ` [PATCH non-pretimeout 3/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-12 20:54 ` Timur Tabi 2015-06-12 20:54 ` Timur Tabi 2015-06-14 10:05 ` Fu Wei 2015-06-14 13:17 ` Timur Tabi 2015-06-14 13:17 ` Timur Tabi 2015-06-14 13:57 ` Guenter Roeck 2015-06-15 11:00 ` Fu Wei 2015-06-10 17:47 ` [PATCH non-pretimeout 4/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-11 5:33 ` Guenter Roeck 2015-06-11 5:33 ` Guenter Roeck 2015-06-11 5:44 ` Fu Wei 2015-06-11 5:49 ` Guenter Roeck 2015-06-11 5:59 ` Fu Wei 2015-06-11 5:59 ` Fu Wei 2015-06-11 16:28 ` [non-pretimeout,4/7] " Guenter Roeck 2015-06-23 13:26 ` Fu Wei 2015-06-23 15:21 ` Guenter Roeck 2015-06-23 15:21 ` Guenter Roeck 2015-06-23 16:17 ` Fu Wei 2015-06-23 16:43 ` Guenter Roeck 2015-06-23 17:01 ` Fu Wei 2015-06-23 17:01 ` Fu Wei 2015-06-12 3:57 ` [PATCH non-pretimeout 4/7] " Timur Tabi 2015-06-12 3:57 ` Timur Tabi 2015-06-14 10:15 ` Fu Wei 2015-06-14 10:15 ` Fu Wei 2015-06-10 17:47 ` [PATCH non-pretimeout 5/7] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-11 11:14 ` Hanjun Guo 2015-06-10 17:47 ` [PATCH non-pretimeout 6/7] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-12 13:16 ` Timur Tabi 2015-06-10 17:47 ` [PATCH non-pretimeout 7/7] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-23 14:16 ` [PATCH v6 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-23 14:16 ` [PATCH v6 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-23 14:16 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-07-14 14:49 ` Rob Herring 2015-07-14 14:49 ` Rob Herring 2015-07-14 15:48 ` Fu Wei 2015-07-14 15:48 ` Fu Wei 2015-07-15 12:52 ` Fu Wei 2015-07-15 12:52 ` Fu Wei 2015-06-23 14:16 ` [PATCH v6 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-23 14:16 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-23 14:16 ` [PATCH v6 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-23 14:16 ` [PATCH v6 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-06-23 14:16 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-29 16:53 ` [PATCH v6 0/8] Watchdog: introduce ARM SBSA watchdog driver Fu Wei 2015-06-29 16:53 ` Fu Wei 2015-06-29 19:16 ` Guenter Roeck 2015-06-30 23:47 ` Fu Wei 2015-07-13 9:09 ` Fu Wei 2015-07-13 9:09 ` Fu Wei 2015-07-13 15:34 ` Guenter Roeck 2015-07-14 0:42 ` Fu Wei 2015-07-14 0:42 ` Fu Wei 2015-06-23 15:59 ` [PATCH v6 5/8] " fu.wei 2015-06-23 15:59 ` [PATCH v6 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-23 15:59 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-07-23 8:32 ` Fu Wei 2015-07-23 8:32 ` Fu Wei 2015-07-23 8:32 ` Fu Wei 2015-06-23 15:59 ` [PATCH v6 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-06-23 15:59 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-23 15:59 ` [PATCH v6 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-23 15:59 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-07-13 8:53 ` [PATCH v2 0/3] arm64: Add multiboot support (via fdt) for Xen boot fu.wei 2015-07-13 8:53 ` [PATCH v2 1/3] arm64: Add Xen boot support file fu.wei 2015-07-15 16:18 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-15 16:18 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-16 16:46 ` Ian Campbell 2015-07-16 16:46 ` Ian Campbell 2015-07-23 10:16 ` Fu Wei 2015-07-23 10:16 ` Fu Wei 2015-07-13 8:53 ` [PATCH v2 2/3] util/grub.d/20_linux_xen.in: Add arm64 support fu.wei 2015-07-14 3:53 ` Andrei Borzenkov 2015-07-14 3:53 ` Andrei Borzenkov 2015-07-14 9:41 ` Ian Campbell 2015-07-14 15:23 ` [Xen-devel] " Konrad Rzeszutek Wilk 2015-07-14 13:09 ` Fu Wei 2015-07-14 13:09 ` Fu Wei 2015-07-15 16:24 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-15 16:24 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-13 8:54 ` [PATCH v2 3/3] arm64: Add the introduction of Xen boot command fu.wei 2015-07-14 9:29 ` [Xen-devel] [PATCH v2 0/3] arm64: Add multiboot support (via fdt) for Xen boot Ian Campbell 2015-07-14 9:29 ` Ian Campbell 2015-07-14 11:56 ` Fu Wei 2015-07-15 15:56 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-15 15:56 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-23 5:16 ` [PATCH v3 0/4] arm64: Add Xen boot support (via fdt) fu.wei 2015-07-23 5:16 ` [PATCH v3 1/4] arm64: Add and export some accessor functions for xen boot fu.wei 2015-10-29 12:03 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 12:03 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 7:11 ` Fu Wei 2015-10-30 7:11 ` Fu Wei 2015-07-23 5:16 ` [PATCH v3 2/4] arm64: Add xen_boot module file fu.wei 2015-10-29 14:27 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 14:27 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 8:08 ` Fu Wei 2015-10-30 8:08 ` Fu Wei 2015-11-03 14:57 ` Fu Wei 2015-11-03 14:57 ` Fu Wei 2015-11-03 15:22 ` Ian Campbell 2015-11-03 15:22 ` Ian Campbell 2015-11-05 9:46 ` Fu Wei 2015-07-23 5:16 ` [PATCH v3 3/4] * util/grub.d/20_linux_xen.in: Add support of the XEN boot on aarch64 fu.wei 2015-10-29 15:25 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 15:25 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 19:53 ` Andrei Borzenkov 2015-10-29 19:53 ` Andrei Borzenkov 2015-10-30 8:44 ` Fu Wei 2015-10-30 8:44 ` Fu Wei 2015-10-30 9:50 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 9:50 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 10:07 ` Andrei Borzenkov 2015-10-30 10:07 ` Andrei Borzenkov [not found] ` <CAEaD8JOHR9QXa=ySc36a-ECF-7MUBgvaSVFw_BZxrXrvZA5u_A@mail.gmail.com> [not found] ` <CAA91j0XKvpgVVWuv79AEv6bguxrQrV4q+eG5Xtw+UBvMSmDF-w@mail.gmail.com> 2015-11-12 10:43 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-23 5:16 ` [PATCH v3 4/4] arm64: Add the introduction of xen boot commands in docs/grub.texi fu.wei 2015-08-04 8:34 ` [PATCH v3 0/4] arm64: Add Xen boot support (via fdt) Fu Wei 2015-09-08 3:38 ` Fu Wei 2015-09-30 16:00 ` Stefano Stabellini 2015-10-01 16:19 ` Stefano Stabellini 2015-10-29 2:43 ` Fu Wei 2015-10-29 6:06 ` Fu Wei 2015-10-29 11:00 ` Stefano Stabellini 2015-08-14 12:35 ` [PATCH] acpi, apei, arm64: APEI initial support for aarch64 fu.wei 2015-08-14 12:39 ` Fu Wei 2015-08-14 18:27 ` Zhang, Jonathan Zhixiong 2015-08-15 6:45 ` Fu Wei 2015-08-17 10:01 ` Will Deacon 2015-08-17 23:19 ` Zhang, Jonathan Zhixiong 2015-08-18 8:31 ` Will Deacon 2015-08-18 9:26 ` Fu Wei 2015-08-18 16:44 ` [PATCH v2 0/2] acpi, apei: add BERT support fu.wei 2015-08-18 16:44 ` [PATCH v2 1/2] acpi, apei: add Boot Error Record Table (BERT) support fu.wei 2015-12-16 10:29 ` Borislav Petkov 2016-01-06 18:21 ` Fu Wei 2016-01-06 18:31 ` Borislav Petkov 2015-08-18 16:44 ` [PATCH v2 2/2] acpi, apei, bert: Clear error status at the end of error handling fu.wei 2015-12-16 10:30 ` Borislav Petkov 2015-12-15 16:39 ` [Linaro-acpi] [PATCH v2 0/2] acpi, apei: add BERT support Timur Tabi 2016-01-06 18:24 ` Fu Wei 2015-08-24 17:01 ` [PATCH v7 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-08-24 17:01 ` [PATCH v7 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-08-24 17:01 ` [PATCH v7 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-09-15 8:43 ` Dave Young 2015-09-15 8:43 ` Dave Young 2015-09-15 9:44 ` Pratyush Anand 2015-09-15 10:23 ` Fu Wei 2015-09-15 10:15 ` Fu Wei 2015-08-24 17:01 ` [PATCH v7 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-08-24 17:01 ` [PATCH v7 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-08-24 17:01 ` [PATCH v7 5/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-09-10 22:29 ` Jon Masters 2015-09-11 2:05 ` Guenter Roeck 2015-09-11 2:50 ` Guenter Roeck 2015-09-11 2:50 ` Guenter Roeck 2015-09-14 17:11 ` Fu Wei 2015-09-15 8:38 ` Dave Young 2015-09-15 10:07 ` Fu Wei 2015-09-16 1:57 ` Dave Young 2015-10-13 8:34 ` Fu Wei 2015-10-13 8:34 ` Fu Wei 2015-08-24 17:01 ` [PATCH v7 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-08-24 17:01 ` [PATCH v7 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-08-24 17:01 ` [PATCH v7 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-08-24 17:01 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-08-24 17:50 ` Thomas Gleixner 2015-08-25 17:19 ` Fu Wei 2015-08-25 19:17 ` Thomas Gleixner 2015-08-25 19:17 ` Thomas Gleixner 2015-08-27 12:02 ` Hanjun Guo 2015-08-27 12:02 ` Hanjun Guo 2015-08-27 12:08 ` Thomas Gleixner 2015-08-27 12:28 ` Hanjun Guo 2015-08-27 12:28 ` Hanjun Guo 2015-08-27 13:36 ` Hanjun Guo 2015-08-27 13:40 ` Thomas Gleixner 2015-08-27 13:40 ` Thomas Gleixner 2015-08-27 13:51 ` Fu Wei 2015-09-14 18:05 ` Marc Zyngier 2015-09-14 18:05 ` Marc Zyngier 2015-09-30 17:13 ` [PATCH v7 0/8] Watchdog: introduce ARM SBSA watchdog driver Pratyush Anand 2015-09-30 17:22 ` Fu Wei 2016-02-25 6:50 ` [PATCH v2 0/4] arm64,xen: add xen_boot support into grup-mkconfig fu.wei
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=556DCC95.806@codeaurora.org \ --to=timur@codeaurora.org \ --cc=Suravee.Suthikulpanit@amd.com \ --cc=al.stone@linaro.org \ --cc=arnd@arndb.de \ --cc=ashwin.chaugule@linaro.org \ --cc=catalin.marinas@arm.com \ --cc=corbet@lwn.net \ --cc=devicetree@vger.kernel.org \ --cc=fu.wei@linaro.org \ --cc=graeme.gregory@linaro.org \ --cc=hanjun.guo@linaro.org \ --cc=jcm@redhat.com \ --cc=leo.duran@amd.com \ --cc=linaro-acpi@lists.linaro.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=mark.rutland@arm.com \ --cc=rjw@rjwysocki.net \ --cc=tekkamanninja@gmail.com \ --cc=vgandhi@codeaurora.org \ --cc=will.deacon@arm.com \ --cc=wim@iguana.be \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.