From: Fu Wei <fu.wei@linaro.org> To: Guenter Roeck <linux@roeck-us.net> Cc: Timur Tabi <timur@codeaurora.org>, Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>, Linaro ACPI Mailman List <linaro-acpi@lists.linaro.org>, linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, Wei Fu <tekkamanninja@gmail.com>, G Gregory <graeme.gregory@linaro.org>, Al Stone <al.stone@linaro.org>, Hanjun Guo <hanjun.guo@linaro.org>, Ashwin Chaugule <ashwin.chaugule@linaro.org>, Arnd Bergmann <arnd@arndb.de>, vgandhi@codeaurora.org, wim@iguana.be, Jon Masters <jcm@redhat.com>, Leo Duran <leo.duran@amd.com>, Jon Corbet <corbet@lwn.net>, Mark Rutland <mark.rutland@arm.com> Subject: Re: [PATCH v2 6/7] Watchdog: introduce ARM SBSA watchdog driver Date: Sun, 24 May 2015 23:50:48 +0800 [thread overview] Message-ID: <CADyBb7t6YoauM6T==E8MmHDvE0R9B4n09cEQH3AKkQvOW1RiJw@mail.gmail.com> (raw) In-Reply-To: <5561DD0B.1040008@roeck-us.net> Hi Guenter, Thanks for your feedback On 24 May 2015 at 22:15, Guenter Roeck <linux@roeck-us.net> wrote: > On 05/24/2015 03:15 AM, Fu Wei wrote: >> >> Hi Guenter, >> >> On 24 May 2015 at 04:01, Guenter Roeck <linux@roeck-us.net> wrote: >>> >>> On 05/23/2015 12:40 PM, Timur Tabi wrote: >>> [ ... ] >>>> >>>> >>>> >>>> I use emergency_restart(), because the watchdog-api.txt documentation >>>> says >>>> this: >>>> >>>> "If userspace fails (RAM error, kernel bug, whatever), the >>>> notifications cease to occur, and the hardware watchdog will reset the >>>> system (causing a reboot) after the timeout occurs." >>>> >>>> Maybe I'm reading this too literally, but to me this means that when the >>>> timeout expires, the system has to reset immediately. >>>> >>>> However, maybe panic() is better, since it can do the same thing and >>>> more. >>>> >>> >>> I have a specific requirement at work to have watchdog expiration >>> (not this watchdog, this is different HW) result in a panic, specifically >>> to enable crashdump support and thus post-mortem analysis. >>> >>> I had not thought about this use case myself, and I had always wondered >>> why watchdog driver implementers would choose to call panic() after an >>> interrupt or NMI. But we live and learn, so now I finally understand. >>> >>> In the pretimeout/timeout world, the pretimeout would (typically) >>> result in a panic, and the timeout would result in a reset. So one >>> would set the timer register to 10s for 10s pretimeout and 20s timeout. >>> >>> However, the pretimeout concept assumes that there are two timers >>> which can be set independently. As you had pointed out earlier, >>> and as the specification seems to confirm, that is not the case here. >> >> >> Sorry, in Documentation/watchdog/watchdog-api.txt, I can not get the >> info about " the pretimeout concept assumes that there are two timers >> which can be set independently." >> Could you kindly point out where is the assumption. >> >> I thinks in kernel documentation, that meams "one watchdog has two >> timeout stages", maybe I miss something. Could you help me out? >> > My apologies. Terminology problem; see below. > > Note that the pretimeout, as documented, is a difference to the real > timeout, not an absolute time (which I had not realized before). > > "Note that the pretimeout is the number of seconds before the time > when the timeout will go off. It is not the number of seconds until > the pretimeout. So, for instance, if you set the timeout to 60 seconds > and the pretimeout to 10 seconds, the pretimeout will go off in 50 > seconds. Setting a pretimeout to zero disables it." yes , this patchset is designed for this pretimeout concept > >>> As such, I don't really understand why and how the pretimeout / timeout >>> concept would add any value here and not just make things more >>> complicated than necessary. Maybe I am just missing something. >> >> >> If pretimeout concept assumes that there are two timers, I >> misunderstand the "pretimeout", then I will delete the pretimeout >> immediately. >> > I think I used the wrong term. I should have said something like > "two distinct timeout values". Actually, I have added my thought at the head of sbsa_gwdt.c as a comment : * * Note: This SBSA Generic watchdog driver is compatible with * the pretimeout concept of Linux kernel. * The timeout and pretimeout are set by the different REGs. * The first watch period is set by writing WCV directly, * that can support more than 10s timeout at the maximum * system counter frequency. * The second watch period is set by WOR(32bit) which will be loaded * automatically by hardware, when WS0 is triggered. * This gives a maximum watch period of around 10s at the maximum * system counter frequency. * The System Counter shall run at maximum of 400MHz. * More details: DEN0029B - Server Base System Architecture (SBSA) * * Kernel/API: P---------| pretimeout * |-------------------------------T timeout * SBSA GWDT: P--WOR---WS1 pretimeout * |-------WCV----------WS0~~~~~~~~T timeout */ > > Guenter > -- Best regards, Fu Wei Software Engineer Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch Ph: +86 21 61221326(direct) Ph: +86 186 2020 4684 (mobile) Room 1512, Regus One Corporate Avenue,Level 15, One Corporate Avenue,222 Hubin Road,Huangpu District, Shanghai,China 200021
WARNING: multiple messages have this Message-ID (diff)
From: Fu Wei <fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> To: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org> Cc: Timur Tabi <timur-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>, Suravee Suthikulpanit <Suravee.Suthikulpanit-5C7GfCeVMHo@public.gmane.org>, Linaro ACPI Mailman List <linaro-acpi-cunTk1MwBs8s++Sfvej+rw@public.gmane.org>, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Wei Fu <tekkamanninja-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, G Gregory <graeme.gregory-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Al Stone <al.stone-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Hanjun Guo <hanjun.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Ashwin Chaugule <ashwin.chaugule-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>, vgandhi-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org, Jon Masters <jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>, Leo Duran <leo.duran-5C7GfCeVMHo@public.gmane.org>, Jon Corbet <corbet-T1hC0tSOHrs@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> Subject: Re: [PATCH v2 6/7] Watchdog: introduce ARM SBSA watchdog driver Date: Sun, 24 May 2015 23:50:48 +0800 [thread overview] Message-ID: <CADyBb7t6YoauM6T==E8MmHDvE0R9B4n09cEQH3AKkQvOW1RiJw@mail.gmail.com> (raw) In-Reply-To: <5561DD0B.1040008-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org> Hi Guenter, Thanks for your feedback On 24 May 2015 at 22:15, Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org> wrote: > On 05/24/2015 03:15 AM, Fu Wei wrote: >> >> Hi Guenter, >> >> On 24 May 2015 at 04:01, Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org> wrote: >>> >>> On 05/23/2015 12:40 PM, Timur Tabi wrote: >>> [ ... ] >>>> >>>> >>>> >>>> I use emergency_restart(), because the watchdog-api.txt documentation >>>> says >>>> this: >>>> >>>> "If userspace fails (RAM error, kernel bug, whatever), the >>>> notifications cease to occur, and the hardware watchdog will reset the >>>> system (causing a reboot) after the timeout occurs." >>>> >>>> Maybe I'm reading this too literally, but to me this means that when the >>>> timeout expires, the system has to reset immediately. >>>> >>>> However, maybe panic() is better, since it can do the same thing and >>>> more. >>>> >>> >>> I have a specific requirement at work to have watchdog expiration >>> (not this watchdog, this is different HW) result in a panic, specifically >>> to enable crashdump support and thus post-mortem analysis. >>> >>> I had not thought about this use case myself, and I had always wondered >>> why watchdog driver implementers would choose to call panic() after an >>> interrupt or NMI. But we live and learn, so now I finally understand. >>> >>> In the pretimeout/timeout world, the pretimeout would (typically) >>> result in a panic, and the timeout would result in a reset. So one >>> would set the timer register to 10s for 10s pretimeout and 20s timeout. >>> >>> However, the pretimeout concept assumes that there are two timers >>> which can be set independently. As you had pointed out earlier, >>> and as the specification seems to confirm, that is not the case here. >> >> >> Sorry, in Documentation/watchdog/watchdog-api.txt, I can not get the >> info about " the pretimeout concept assumes that there are two timers >> which can be set independently." >> Could you kindly point out where is the assumption. >> >> I thinks in kernel documentation, that meams "one watchdog has two >> timeout stages", maybe I miss something. Could you help me out? >> > My apologies. Terminology problem; see below. > > Note that the pretimeout, as documented, is a difference to the real > timeout, not an absolute time (which I had not realized before). > > "Note that the pretimeout is the number of seconds before the time > when the timeout will go off. It is not the number of seconds until > the pretimeout. So, for instance, if you set the timeout to 60 seconds > and the pretimeout to 10 seconds, the pretimeout will go off in 50 > seconds. Setting a pretimeout to zero disables it." yes , this patchset is designed for this pretimeout concept > >>> As such, I don't really understand why and how the pretimeout / timeout >>> concept would add any value here and not just make things more >>> complicated than necessary. Maybe I am just missing something. >> >> >> If pretimeout concept assumes that there are two timers, I >> misunderstand the "pretimeout", then I will delete the pretimeout >> immediately. >> > I think I used the wrong term. I should have said something like > "two distinct timeout values". Actually, I have added my thought at the head of sbsa_gwdt.c as a comment : * * Note: This SBSA Generic watchdog driver is compatible with * the pretimeout concept of Linux kernel. * The timeout and pretimeout are set by the different REGs. * The first watch period is set by writing WCV directly, * that can support more than 10s timeout at the maximum * system counter frequency. * The second watch period is set by WOR(32bit) which will be loaded * automatically by hardware, when WS0 is triggered. * This gives a maximum watch period of around 10s at the maximum * system counter frequency. * The System Counter shall run at maximum of 400MHz. * More details: DEN0029B - Server Base System Architecture (SBSA) * * Kernel/API: P---------| pretimeout * |-------------------------------T timeout * SBSA GWDT: P--WOR---WS1 pretimeout * |-------WCV----------WS0~~~~~~~~T timeout */ > > Guenter > -- Best regards, Fu Wei Software Engineer Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch Ph: +86 21 61221326(direct) Ph: +86 186 2020 4684 (mobile) Room 1512, Regus One Corporate Avenue,Level 15, One Corporate Avenue,222 Hubin Road,Huangpu District, Shanghai,China 200021 -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-05-24 15:50 UTC|newest] Thread overview: 550+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <=fu.wei@linaro.org> 2015-05-15 11:08 ` [PATCH 0/6] Watchdog: introdouce ARM SBSA watchdog driver fu.wei 2015-05-15 11:08 ` [PATCH 1/6] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-05-15 14:06 ` Arnd Bergmann 2015-05-15 14:06 ` Arnd Bergmann 2015-05-15 14:14 ` Fu Wei 2015-05-15 14:14 ` Fu Wei 2015-05-16 10:29 ` Fu Wei 2015-05-16 10:29 ` Fu Wei 2015-05-15 11:08 ` [PATCH 2/6] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-05-15 11:08 ` [PATCH 3/6] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-05-15 11:08 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-15 14:07 ` [Linaro-acpi] [PATCH 0/6] Watchdog: introdouce ARM SBSA watchdog driver Arnd Bergmann 2015-05-15 14:07 ` Arnd Bergmann 2015-05-16 10:33 ` Fu Wei 2015-05-16 10:33 ` Fu Wei 2015-05-15 11:24 ` [PATCH 4/6] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-05-15 11:24 ` [PATCH 5/6] Watchdog: introdouce ARM SBSA watchdog driver fu.wei 2015-05-15 13:57 ` Arnd Bergmann 2015-05-16 12:01 ` Fu Wei 2015-05-16 12:01 ` Fu Wei 2015-05-16 12:26 ` Timur Tabi 2015-05-15 22:57 ` Guenter Roeck 2015-05-15 22:57 ` Guenter Roeck 2015-05-18 17:38 ` Fu Wei 2015-05-18 17:38 ` Fu Wei 2015-05-15 11:24 ` [PATCH 6/6] ACPI: import watchdog info of GTDT into platform device fu.wei 2015-05-15 13:33 ` [PATCH 4/6] Watchdog: introdouce "pretimeout" into framework Guenter Roeck 2015-05-15 13:49 ` Fu Wei 2015-05-15 13:55 ` Timur Tabi 2015-05-15 13:55 ` Timur Tabi 2015-05-15 17:59 ` Guenter Roeck 2015-05-15 18:01 ` Guenter Roeck 2015-05-15 18:01 ` Guenter Roeck 2015-05-18 17:22 ` Fu Wei 2015-05-18 17:22 ` Fu Wei 2015-05-15 14:04 ` Arnd Bergmann 2015-05-18 17:19 ` Fu Wei 2015-05-18 17:19 ` Fu Wei 2015-05-18 17:23 ` Guenter Roeck 2015-05-18 17:39 ` Fu Wei 2015-05-18 20:03 ` Arnd Bergmann 2015-05-18 20:14 ` Guenter Roeck 2015-05-18 20:14 ` Guenter Roeck 2015-05-19 1:12 ` Fu Wei 2015-05-19 1:12 ` Fu Wei 2015-05-21 8:32 ` [PATCH v2 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-05-21 8:32 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-21 8:32 ` [PATCH v2 1/7] clocksource: export "arch_timer_get_rate" for the other drivers fu.wei 2015-05-21 8:32 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-22 14:02 ` Hanjun Guo 2015-05-22 14:09 ` Timur Tabi 2015-05-22 15:16 ` Guenter Roeck 2015-05-22 16:22 ` Timur Tabi 2015-05-21 8:32 ` [PATCH v2 2/7] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-05-21 8:32 ` [PATCH v2 3/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-05-21 8:45 ` Arnd Bergmann 2015-05-21 8:49 ` Fu Wei 2015-05-21 8:49 ` Fu Wei 2015-05-21 8:32 ` [PATCH v2 4/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-05-21 20:33 ` Suravee Suthikulpanit 2015-05-21 20:33 ` Suravee Suthikulpanit 2015-05-21 8:32 ` [PATCH v2 5/7] Watchdog: introduce "pretimeout" into framework fu.wei 2015-05-21 9:04 ` Guenter Roeck 2015-05-21 10:05 ` Fu Wei 2015-05-21 10:05 ` Fu Wei 2015-05-21 10:17 ` Guenter Roeck 2015-05-21 10:50 ` Fu Wei 2015-05-21 10:50 ` Fu Wei 2015-05-21 13:28 ` Guenter Roeck 2015-05-21 10:11 ` Guenter Roeck 2015-05-21 15:32 ` Guenter Roeck 2015-05-21 15:32 ` Guenter Roeck 2015-05-22 5:17 ` Fu Wei 2015-05-25 3:09 ` Fu Wei 2015-05-25 3:09 ` Fu Wei 2015-05-22 6:30 ` Timo Kokkonen 2015-05-22 8:23 ` Fu Wei 2015-05-22 8:59 ` Timo Kokkonen 2015-05-22 10:46 ` Fu Wei 2015-05-22 10:46 ` Fu Wei 2015-05-22 12:14 ` Timo Kokkonen 2015-05-22 13:37 ` Guenter Roeck 2015-05-22 13:23 ` Guenter Roeck 2015-05-22 14:38 ` Fu Wei 2015-05-22 14:38 ` Fu Wei 2015-05-22 15:05 ` Guenter Roeck 2015-05-24 16:17 ` Fu Wei 2015-05-21 8:32 ` [PATCH v2 6/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-05-21 8:32 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-21 10:34 ` Guenter Roeck 2015-05-21 10:34 ` Guenter Roeck 2015-05-21 11:08 ` Fu Wei 2015-05-21 15:18 ` Guenter Roeck 2015-05-21 15:18 ` Guenter Roeck 2015-05-21 15:46 ` Fu Wei 2015-05-21 15:59 ` Guenter Roeck 2015-05-21 16:12 ` Fu Wei 2015-05-21 16:12 ` Fu Wei 2015-05-21 16:33 ` Timur Tabi 2015-05-21 16:33 ` Timur Tabi 2015-05-22 5:05 ` Fu Wei 2015-05-22 5:05 ` Fu Wei 2015-05-21 13:09 ` Timur Tabi 2015-05-21 15:28 ` Guenter Roeck 2015-05-21 15:28 ` Guenter Roeck 2015-05-25 3:43 ` Fu Wei 2015-05-25 3:43 ` Fu Wei 2015-05-25 3:46 ` Timur Tabi 2015-05-25 3:46 ` Timur Tabi 2015-05-25 4:11 ` Fu Wei 2015-05-25 4:11 ` Fu Wei 2015-05-21 15:42 ` Timur Tabi 2015-05-21 15:42 ` Timur Tabi 2015-05-23 16:28 ` Fu Wei 2015-05-23 16:50 ` Fu Wei 2015-05-23 19:40 ` Timur Tabi 2015-05-23 19:40 ` Timur Tabi 2015-05-23 20:01 ` Guenter Roeck 2015-05-23 20:01 ` Guenter Roeck 2015-05-23 20:27 ` Timur Tabi 2015-05-23 20:27 ` Timur Tabi 2015-05-23 20:44 ` Guenter Roeck 2015-05-24 10:50 ` Fu Wei 2015-05-24 10:15 ` Fu Wei 2015-05-24 14:15 ` Guenter Roeck 2015-05-24 14:15 ` Guenter Roeck 2015-05-24 15:50 ` Fu Wei [this message] 2015-05-24 15:50 ` Fu Wei 2015-05-24 16:23 ` Guenter Roeck 2015-05-24 16:47 ` Fu Wei 2015-05-24 16:58 ` Guenter Roeck 2015-05-24 16:58 ` Guenter Roeck 2015-05-24 17:04 ` Fu Wei 2015-05-24 17:04 ` Fu Wei 2015-05-24 15:02 ` Timur Tabi 2015-05-24 16:04 ` Fu Wei 2015-05-24 16:04 ` Fu Wei 2015-05-24 16:13 ` Timur Tabi 2015-05-24 16:13 ` Timur Tabi 2015-05-24 16:29 ` Guenter Roeck 2015-05-24 16:29 ` Guenter Roeck 2015-05-24 16:33 ` Fu Wei 2015-05-24 16:44 ` Timur Tabi 2015-05-24 16:50 ` Guenter Roeck 2015-05-24 16:52 ` Fu Wei 2015-05-24 17:19 ` Timur Tabi 2015-05-24 17:19 ` Timur Tabi 2015-05-24 17:23 ` Fu Wei 2015-05-24 17:32 ` Guenter Roeck 2015-05-24 17:32 ` Guenter Roeck 2015-05-24 17:47 ` Timur Tabi 2015-05-25 2:03 ` Fu Wei 2015-05-25 2:00 ` Fu Wei 2015-05-24 16:29 ` Fu Wei 2015-05-22 14:50 ` Hanjun Guo 2015-05-22 14:50 ` Hanjun Guo 2015-05-22 14:55 ` Arnd Bergmann 2015-05-22 15:01 ` Guenter Roeck 2015-05-22 15:01 ` Guenter Roeck 2015-05-22 15:18 ` Hanjun Guo 2015-05-22 15:18 ` Hanjun Guo 2015-05-22 15:24 ` [Linaro-acpi] " Arnd Bergmann 2015-05-22 15:24 ` Arnd Bergmann 2015-05-22 16:19 ` Timur Tabi 2015-05-22 20:13 ` Arnd Bergmann 2015-05-22 20:17 ` Timur Tabi 2015-05-23 7:25 ` Fu Wei 2015-05-23 7:25 ` Fu Wei 2015-05-22 16:19 ` Timur Tabi 2015-05-23 14:47 ` Fu Wei 2015-05-22 16:18 ` Timur Tabi 2015-05-23 15:08 ` Timur Tabi 2015-05-23 15:08 ` Timur Tabi 2015-05-23 17:26 ` Fu Wei 2015-05-23 18:35 ` Guenter Roeck 2015-05-23 18:37 ` Timur Tabi 2015-05-23 19:03 ` Fu Wei 2015-05-23 19:51 ` Guenter Roeck 2015-05-24 9:58 ` Fu Wei 2015-05-24 14:06 ` Guenter Roeck 2015-05-24 14:06 ` Guenter Roeck 2015-05-24 15:06 ` Timur Tabi 2015-05-24 15:06 ` Timur Tabi 2015-05-24 15:37 ` Fu Wei 2015-05-24 15:37 ` Fu Wei 2015-05-23 18:40 ` Timur Tabi 2015-05-23 19:14 ` Fu Wei 2015-05-23 19:14 ` Fu Wei 2015-05-23 19:21 ` Timur Tabi 2015-05-21 8:32 ` [PATCH v2 7/7] ACPI: import watchdog info of GTDT into platform device fu.wei 2015-05-22 15:38 ` Hanjun Guo 2015-05-22 15:38 ` Hanjun Guo 2015-05-23 19:46 ` Timur Tabi 2015-05-23 19:46 ` Timur Tabi 2015-05-21 8:46 ` [Linaro-acpi] [PATCH v2 0/7] Watchdog: introduce ARM SBSA watchdog driver Arnd Bergmann 2015-05-21 8:46 ` Arnd Bergmann 2015-05-21 9:01 ` Fu Wei 2015-05-21 9:01 ` Fu Wei 2015-05-21 20:36 ` Suravee Suthikulpanit 2015-05-21 20:36 ` Suravee Suthikulpanit 2015-05-22 5:08 ` Fu Wei 2015-05-25 10:03 ` [PATCH v3 0/6] " fu.wei 2015-05-25 10:03 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-25 10:03 ` [PATCH v3 1/6] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-05-25 10:03 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-05-25 10:03 ` [PATCH v3 2/6] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-05-25 10:03 ` [PATCH v3 3/6] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-05-25 10:03 ` [PATCH v3 4/6] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-05-25 19:28 ` Guenter Roeck 2015-05-25 19:28 ` Guenter Roeck 2015-05-25 10:03 ` [PATCH v3 5/6] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-05-25 19:39 ` Guenter Roeck 2015-05-25 19:39 ` Guenter Roeck 2015-05-29 9:11 ` Fu Wei 2015-05-29 9:11 ` Fu Wei 2015-05-29 14:54 ` Guenter Roeck 2015-05-29 15:05 ` Fu Wei 2015-05-26 16:50 ` Timur Tabi 2015-05-29 10:17 ` Fu Wei 2015-05-29 10:17 ` Fu Wei 2015-05-29 13:28 ` Timur Tabi 2015-05-29 13:28 ` Timur Tabi 2015-05-29 14:32 ` Fu Wei 2015-05-29 14:32 ` Fu Wei 2015-05-29 15:46 ` Timur Tabi 2015-05-29 15:46 ` Timur Tabi 2015-05-29 17:53 ` Fu Wei 2015-05-29 18:27 ` Timur Tabi 2015-05-29 18:27 ` Timur Tabi 2015-05-29 22:10 ` Guenter Roeck 2015-05-29 22:10 ` Guenter Roeck 2015-06-01 7:50 ` Fu Wei 2015-05-25 10:03 ` [PATCH v3 6/6] ACPI: import watchdog info of GTDT into platform device fu.wei 2015-05-26 8:28 ` Hanjun Guo 2015-05-26 16:35 ` Timur Tabi 2015-05-26 18:24 ` Guenter Roeck 2015-05-26 18:24 ` Guenter Roeck 2015-05-27 3:01 ` Hanjun Guo 2015-05-27 3:08 ` Timur Tabi 2015-05-27 3:08 ` Timur Tabi 2015-05-26 12:28 ` Will Deacon 2015-05-26 12:28 ` Will Deacon 2015-05-26 15:02 ` Ashwin Chaugule 2015-05-26 15:02 ` Ashwin Chaugule 2015-05-26 15:18 ` Will Deacon 2015-05-26 15:18 ` Will Deacon 2015-05-26 15:35 ` Ashwin Chaugule 2015-05-26 15:35 ` Ashwin Chaugule 2015-05-26 15:35 ` Ashwin Chaugule 2015-05-26 15:36 ` Guenter Roeck 2015-05-26 15:36 ` Guenter Roeck 2015-05-26 16:27 ` Fu Wei 2015-05-26 16:27 ` Fu Wei 2015-05-27 10:44 ` Will Deacon 2015-05-27 10:44 ` Will Deacon 2015-05-29 11:13 ` Fu Wei 2015-05-29 11:13 ` Fu Wei 2015-06-02 4:05 ` [PATCH v4 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-02 4:05 ` [PATCH v4 1/7] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-02 4:05 ` [PATCH v4 2/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-02 4:05 ` [PATCH v4 3/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-02 4:05 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-02 4:05 ` [PATCH v4 4/7] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-06-02 4:05 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-02 16:12 ` Guenter Roeck 2015-06-02 16:12 ` Guenter Roeck 2015-06-08 16:44 ` Fu Wei 2015-06-02 4:05 ` [PATCH v4 5/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-02 4:05 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-02 15:32 ` Timur Tabi 2015-06-02 15:32 ` Timur Tabi 2015-06-02 15:37 ` Guenter Roeck 2015-06-02 15:37 ` Guenter Roeck 2015-06-02 16:55 ` Fu Wei 2015-06-02 16:55 ` Fu Wei 2015-06-02 17:07 ` Guenter Roeck 2015-06-02 17:07 ` Guenter Roeck 2015-06-08 16:05 ` Fu Wei 2015-06-08 16:05 ` Fu Wei 2015-06-08 18:26 ` Guenter Roeck 2015-06-08 18:26 ` Guenter Roeck 2015-06-09 3:59 ` Fu Wei 2015-06-09 4:37 ` Guenter Roeck 2015-06-09 4:37 ` Guenter Roeck 2015-06-09 6:37 ` Fu Wei 2015-06-09 6:37 ` Fu Wei 2015-06-09 8:04 ` Guenter Roeck 2015-06-09 8:04 ` Guenter Roeck 2015-06-09 10:46 ` Fu Wei 2015-06-09 16:22 ` Guenter Roeck 2015-06-09 16:29 ` Timur Tabi 2015-06-09 16:29 ` Timur Tabi 2015-06-09 16:45 ` Guenter Roeck 2015-06-09 16:53 ` Timur Tabi 2015-06-09 16:53 ` Timur Tabi 2015-06-10 3:41 ` Fu Wei 2015-06-10 3:41 ` Fu Wei 2015-06-10 4:20 ` Fu Wei 2015-06-10 14:22 ` Timur Tabi 2015-06-10 14:22 ` Timur Tabi 2015-06-10 14:36 ` Fu Wei 2015-06-10 14:36 ` Fu Wei 2015-06-10 14:41 ` Fu Wei 2015-06-10 14:41 ` Fu Wei 2015-06-10 14:41 ` Fu Wei 2015-06-10 15:38 ` Fu Wei 2015-06-10 15:38 ` Fu Wei 2015-06-10 17:54 ` Fu Wei 2015-06-10 17:54 ` Fu Wei 2015-06-11 0:22 ` Timur Tabi 2015-06-11 0:22 ` Timur Tabi 2015-06-11 3:00 ` Fu Wei 2015-06-11 3:45 ` Timur Tabi 2015-06-11 3:45 ` Timur Tabi 2015-06-11 5:13 ` Guenter Roeck 2015-06-11 5:13 ` Guenter Roeck 2015-06-11 5:33 ` Fu Wei 2015-06-11 5:32 ` Fu Wei 2015-06-11 5:32 ` Fu Wei 2015-06-02 17:21 ` Timur Tabi 2015-06-02 17:21 ` Timur Tabi 2015-06-03 18:16 ` Timur Tabi 2015-06-03 18:16 ` Timur Tabi 2015-06-03 18:25 ` Guenter Roeck 2015-06-03 18:25 ` Guenter Roeck 2015-06-03 18:53 ` Timur Tabi 2015-06-03 18:53 ` Timur Tabi 2015-06-03 19:29 ` Arnd Bergmann 2015-09-10 22:45 ` Jon Masters 2015-09-14 4:21 ` Pratyush Anand 2015-09-14 15:27 ` Fu Wei 2015-09-14 15:27 ` Fu Wei 2015-09-14 8:51 ` Catalin Marinas 2015-09-15 3:16 ` Fu Wei 2015-09-15 3:16 ` Fu Wei 2015-06-08 16:10 ` Fu Wei 2015-06-02 4:05 ` [PATCH v4 6/7] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-02 4:05 ` [PATCH v4 7/7] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-10 13:41 ` [PATCH v5 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-10 13:41 ` [PATCH v5 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-06-10 16:21 ` Guenter Roeck 2015-06-10 16:21 ` Guenter Roeck 2015-06-11 11:22 ` Fu Wei 2015-06-11 16:38 ` Guenter Roeck 2015-06-11 16:38 ` Guenter Roeck 2015-06-10 13:41 ` [PATCH v5 5/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-06-10 13:41 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 13:41 ` [PATCH v5 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-10 17:47 ` [PATCH non-pretimeout 0/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 17:47 ` [PATCH non-pretimeout 1/7] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-10 17:47 ` [PATCH non-pretimeout 2/7] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-10 17:47 ` [PATCH non-pretimeout 3/7] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-12 20:54 ` Timur Tabi 2015-06-12 20:54 ` Timur Tabi 2015-06-14 10:05 ` Fu Wei 2015-06-14 13:17 ` Timur Tabi 2015-06-14 13:17 ` Timur Tabi 2015-06-14 13:57 ` Guenter Roeck 2015-06-15 11:00 ` Fu Wei 2015-06-10 17:47 ` [PATCH non-pretimeout 4/7] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-11 5:33 ` Guenter Roeck 2015-06-11 5:33 ` Guenter Roeck 2015-06-11 5:44 ` Fu Wei 2015-06-11 5:49 ` Guenter Roeck 2015-06-11 5:59 ` Fu Wei 2015-06-11 5:59 ` Fu Wei 2015-06-11 16:28 ` [non-pretimeout,4/7] " Guenter Roeck 2015-06-23 13:26 ` Fu Wei 2015-06-23 15:21 ` Guenter Roeck 2015-06-23 15:21 ` Guenter Roeck 2015-06-23 16:17 ` Fu Wei 2015-06-23 16:43 ` Guenter Roeck 2015-06-23 17:01 ` Fu Wei 2015-06-23 17:01 ` Fu Wei 2015-06-12 3:57 ` [PATCH non-pretimeout 4/7] " Timur Tabi 2015-06-12 3:57 ` Timur Tabi 2015-06-14 10:15 ` Fu Wei 2015-06-14 10:15 ` Fu Wei 2015-06-10 17:47 ` [PATCH non-pretimeout 5/7] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-11 11:14 ` Hanjun Guo 2015-06-10 17:47 ` [PATCH non-pretimeout 6/7] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-12 13:16 ` Timur Tabi 2015-06-10 17:47 ` [PATCH non-pretimeout 7/7] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-10 17:47 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-23 14:16 ` [PATCH v6 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-06-23 14:16 ` [PATCH v6 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-06-23 14:16 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-07-14 14:49 ` Rob Herring 2015-07-14 14:49 ` Rob Herring 2015-07-14 15:48 ` Fu Wei 2015-07-14 15:48 ` Fu Wei 2015-07-15 12:52 ` Fu Wei 2015-07-15 12:52 ` Fu Wei 2015-06-23 14:16 ` [PATCH v6 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-06-23 14:16 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-23 14:16 ` [PATCH v6 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-06-23 14:16 ` [PATCH v6 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-06-23 14:16 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-29 16:53 ` [PATCH v6 0/8] Watchdog: introduce ARM SBSA watchdog driver Fu Wei 2015-06-29 16:53 ` Fu Wei 2015-06-29 19:16 ` Guenter Roeck 2015-06-30 23:47 ` Fu Wei 2015-07-13 9:09 ` Fu Wei 2015-07-13 9:09 ` Fu Wei 2015-07-13 15:34 ` Guenter Roeck 2015-07-14 0:42 ` Fu Wei 2015-07-14 0:42 ` Fu Wei 2015-06-23 15:59 ` [PATCH v6 5/8] " fu.wei 2015-06-23 15:59 ` [PATCH v6 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-06-23 15:59 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-07-23 8:32 ` Fu Wei 2015-07-23 8:32 ` Fu Wei 2015-07-23 8:32 ` Fu Wei 2015-06-23 15:59 ` [PATCH v6 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-06-23 15:59 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-06-23 15:59 ` [PATCH v6 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-06-23 15:59 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-07-13 8:53 ` [PATCH v2 0/3] arm64: Add multiboot support (via fdt) for Xen boot fu.wei 2015-07-13 8:53 ` [PATCH v2 1/3] arm64: Add Xen boot support file fu.wei 2015-07-15 16:18 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-15 16:18 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-16 16:46 ` Ian Campbell 2015-07-16 16:46 ` Ian Campbell 2015-07-23 10:16 ` Fu Wei 2015-07-23 10:16 ` Fu Wei 2015-07-13 8:53 ` [PATCH v2 2/3] util/grub.d/20_linux_xen.in: Add arm64 support fu.wei 2015-07-14 3:53 ` Andrei Borzenkov 2015-07-14 3:53 ` Andrei Borzenkov 2015-07-14 9:41 ` Ian Campbell 2015-07-14 15:23 ` [Xen-devel] " Konrad Rzeszutek Wilk 2015-07-14 13:09 ` Fu Wei 2015-07-14 13:09 ` Fu Wei 2015-07-15 16:24 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-15 16:24 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-13 8:54 ` [PATCH v2 3/3] arm64: Add the introduction of Xen boot command fu.wei 2015-07-14 9:29 ` [Xen-devel] [PATCH v2 0/3] arm64: Add multiboot support (via fdt) for Xen boot Ian Campbell 2015-07-14 9:29 ` Ian Campbell 2015-07-14 11:56 ` Fu Wei 2015-07-15 15:56 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-15 15:56 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-23 5:16 ` [PATCH v3 0/4] arm64: Add Xen boot support (via fdt) fu.wei 2015-07-23 5:16 ` [PATCH v3 1/4] arm64: Add and export some accessor functions for xen boot fu.wei 2015-10-29 12:03 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 12:03 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 7:11 ` Fu Wei 2015-10-30 7:11 ` Fu Wei 2015-07-23 5:16 ` [PATCH v3 2/4] arm64: Add xen_boot module file fu.wei 2015-10-29 14:27 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 14:27 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 8:08 ` Fu Wei 2015-10-30 8:08 ` Fu Wei 2015-11-03 14:57 ` Fu Wei 2015-11-03 14:57 ` Fu Wei 2015-11-03 15:22 ` Ian Campbell 2015-11-03 15:22 ` Ian Campbell 2015-11-05 9:46 ` Fu Wei 2015-07-23 5:16 ` [PATCH v3 3/4] * util/grub.d/20_linux_xen.in: Add support of the XEN boot on aarch64 fu.wei 2015-10-29 15:25 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 15:25 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-29 19:53 ` Andrei Borzenkov 2015-10-29 19:53 ` Andrei Borzenkov 2015-10-30 8:44 ` Fu Wei 2015-10-30 8:44 ` Fu Wei 2015-10-30 9:50 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 9:50 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-10-30 10:07 ` Andrei Borzenkov 2015-10-30 10:07 ` Andrei Borzenkov [not found] ` <CAEaD8JOHR9QXa=ySc36a-ECF-7MUBgvaSVFw_BZxrXrvZA5u_A@mail.gmail.com> [not found] ` <CAA91j0XKvpgVVWuv79AEv6bguxrQrV4q+eG5Xtw+UBvMSmDF-w@mail.gmail.com> 2015-11-12 10:43 ` Vladimir 'φ-coder/phcoder' Serbinenko 2015-07-23 5:16 ` [PATCH v3 4/4] arm64: Add the introduction of xen boot commands in docs/grub.texi fu.wei 2015-08-04 8:34 ` [PATCH v3 0/4] arm64: Add Xen boot support (via fdt) Fu Wei 2015-09-08 3:38 ` Fu Wei 2015-09-30 16:00 ` Stefano Stabellini 2015-10-01 16:19 ` Stefano Stabellini 2015-10-29 2:43 ` Fu Wei 2015-10-29 6:06 ` Fu Wei 2015-10-29 11:00 ` Stefano Stabellini 2015-08-14 12:35 ` [PATCH] acpi, apei, arm64: APEI initial support for aarch64 fu.wei 2015-08-14 12:39 ` Fu Wei 2015-08-14 18:27 ` Zhang, Jonathan Zhixiong 2015-08-15 6:45 ` Fu Wei 2015-08-17 10:01 ` Will Deacon 2015-08-17 23:19 ` Zhang, Jonathan Zhixiong 2015-08-18 8:31 ` Will Deacon 2015-08-18 9:26 ` Fu Wei 2015-08-18 16:44 ` [PATCH v2 0/2] acpi, apei: add BERT support fu.wei 2015-08-18 16:44 ` [PATCH v2 1/2] acpi, apei: add Boot Error Record Table (BERT) support fu.wei 2015-12-16 10:29 ` Borislav Petkov 2016-01-06 18:21 ` Fu Wei 2016-01-06 18:31 ` Borislav Petkov 2015-08-18 16:44 ` [PATCH v2 2/2] acpi, apei, bert: Clear error status at the end of error handling fu.wei 2015-12-16 10:30 ` Borislav Petkov 2015-12-15 16:39 ` [Linaro-acpi] [PATCH v2 0/2] acpi, apei: add BERT support Timur Tabi 2016-01-06 18:24 ` Fu Wei 2015-08-24 17:01 ` [PATCH v7 0/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-08-24 17:01 ` [PATCH v7 1/8] Documentation: add sbsa-gwdt.txt documentation fu.wei 2015-08-24 17:01 ` [PATCH v7 2/8] ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts fu.wei 2015-09-15 8:43 ` Dave Young 2015-09-15 8:43 ` Dave Young 2015-09-15 9:44 ` Pratyush Anand 2015-09-15 10:23 ` Fu Wei 2015-09-15 10:15 ` Fu Wei 2015-08-24 17:01 ` [PATCH v7 3/8] ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi fu.wei 2015-08-24 17:01 ` [PATCH v7 4/8] Watchdog: introdouce "pretimeout" into framework fu.wei 2015-08-24 17:01 ` [PATCH v7 5/8] Watchdog: introduce ARM SBSA watchdog driver fu.wei 2015-09-10 22:29 ` Jon Masters 2015-09-11 2:05 ` Guenter Roeck 2015-09-11 2:50 ` Guenter Roeck 2015-09-11 2:50 ` Guenter Roeck 2015-09-14 17:11 ` Fu Wei 2015-09-15 8:38 ` Dave Young 2015-09-15 10:07 ` Fu Wei 2015-09-16 1:57 ` Dave Young 2015-10-13 8:34 ` Fu Wei 2015-10-13 8:34 ` Fu Wei 2015-08-24 17:01 ` [PATCH v7 6/8] ACPI: add GTDT table parse driver into ACPI driver fu.wei 2015-08-24 17:01 ` [PATCH v7 7/8] Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver fu.wei 2015-08-24 17:01 ` [PATCH v7 8/8] clocksource: simplify ACPI code in arm_arch_timer.c fu.wei 2015-08-24 17:01 ` fu.wei-QSEj5FYQhm4dnm+yROfE0A 2015-08-24 17:50 ` Thomas Gleixner 2015-08-25 17:19 ` Fu Wei 2015-08-25 19:17 ` Thomas Gleixner 2015-08-25 19:17 ` Thomas Gleixner 2015-08-27 12:02 ` Hanjun Guo 2015-08-27 12:02 ` Hanjun Guo 2015-08-27 12:08 ` Thomas Gleixner 2015-08-27 12:28 ` Hanjun Guo 2015-08-27 12:28 ` Hanjun Guo 2015-08-27 13:36 ` Hanjun Guo 2015-08-27 13:40 ` Thomas Gleixner 2015-08-27 13:40 ` Thomas Gleixner 2015-08-27 13:51 ` Fu Wei 2015-09-14 18:05 ` Marc Zyngier 2015-09-14 18:05 ` Marc Zyngier 2015-09-30 17:13 ` [PATCH v7 0/8] Watchdog: introduce ARM SBSA watchdog driver Pratyush Anand 2015-09-30 17:22 ` Fu Wei 2016-02-25 6:50 ` [PATCH v2 0/4] arm64,xen: add xen_boot support into grup-mkconfig fu.wei
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to='CADyBb7t6YoauM6T==E8MmHDvE0R9B4n09cEQH3AKkQvOW1RiJw@mail.gmail.com' \ --to=fu.wei@linaro.org \ --cc=Suravee.Suthikulpanit@amd.com \ --cc=al.stone@linaro.org \ --cc=arnd@arndb.de \ --cc=ashwin.chaugule@linaro.org \ --cc=corbet@lwn.net \ --cc=devicetree@vger.kernel.org \ --cc=graeme.gregory@linaro.org \ --cc=hanjun.guo@linaro.org \ --cc=jcm@redhat.com \ --cc=leo.duran@amd.com \ --cc=linaro-acpi@lists.linaro.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=mark.rutland@arm.com \ --cc=tekkamanninja@gmail.com \ --cc=timur@codeaurora.org \ --cc=vgandhi@codeaurora.org \ --cc=wim@iguana.be \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.