* [PATCH net-next 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver
@ 2024-04-13 22:08 Arınç ÜNAL
2024-04-13 22:08 ` [PATCH net-next 1/2] net: dsa: mt7530-mdio: read PHY address of switch from device tree Arınç ÜNAL
2024-04-13 22:08 ` [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations Arınç ÜNAL
0 siblings, 2 replies; 3+ messages in thread
From: Arınç ÜNAL @ 2024-04-13 22:08 UTC (permalink / raw)
To: Daniel Golle, DENG Qingfang, Sean Wang, Andrew Lunn,
Florian Fainelli, Vladimir Oltean, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Matthias Brugger,
AngeloGioacchino Del Regno
Cc: Bartel Eerdekens, mithat.guner, erkin.bozoglu, netdev,
linux-kernel, linux-arm-kernel, linux-mediatek,
Arınç ÜNAL
This patch series makes the driver read the PHY address the switch listens
on from the device tree which, in result, brings support for MT7530
switches listening on a different PHY address than 31. And the patch series
simplifies the core operations.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
Arınç ÜNAL (2):
net: dsa: mt7530-mdio: read PHY address of switch from device tree
net: dsa: mt7530: simplify core operations
drivers/net/dsa/mt7530-mdio.c | 28 +++++-----
drivers/net/dsa/mt7530.c | 125 +++++++++++++++++++-----------------------
drivers/net/dsa/mt7530.h | 4 +-
3 files changed, 73 insertions(+), 84 deletions(-)
---
base-commit: 32affa5578f0e6b9abef3623d3976395afbd265c
change-id: 20240324-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-64476588ebea
Best regards,
--
Arınç ÜNAL <arinc.unal@arinc9.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH net-next 1/2] net: dsa: mt7530-mdio: read PHY address of switch from device tree
2024-04-13 22:08 [PATCH net-next 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver Arınç ÜNAL
@ 2024-04-13 22:08 ` Arınç ÜNAL
2024-04-13 22:08 ` [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations Arınç ÜNAL
1 sibling, 0 replies; 3+ messages in thread
From: Arınç ÜNAL @ 2024-04-13 22:08 UTC (permalink / raw)
To: Daniel Golle, DENG Qingfang, Sean Wang, Andrew Lunn,
Florian Fainelli, Vladimir Oltean, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Matthias Brugger,
AngeloGioacchino Del Regno
Cc: Bartel Eerdekens, mithat.guner, erkin.bozoglu, netdev,
linux-kernel, linux-arm-kernel, linux-mediatek,
Arınç ÜNAL
Read the PHY address the switch listens on from the reg property of the
switch node on the device tree. This change brings support for MT7530
switches on boards with such bootstrapping configuration where the switch
listens on a different PHY address than the hardcoded PHY address on the
driver, 31.
As described on the "MT7621 Programming Guide v0.4" document, the MT7530
switch and its PHYs can be configured to listen on the range of 7-12,
15-20, 23-28, and 31 and 0-4 PHY addresses.
There are operations where the switch PHY registers are used. For the PHY
address of the control PHY, transform the MT753X_CTRL_PHY_ADDR constant
into a macro and use it. The PHY address for the control PHY is 0 when the
switch listens on 31. In any other case, it is one greater than the PHY
address the switch listens on.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530-mdio.c | 28 ++++++++++++++--------------
drivers/net/dsa/mt7530.c | 35 ++++++++++++++++++++++-------------
drivers/net/dsa/mt7530.h | 4 +++-
3 files changed, 39 insertions(+), 28 deletions(-)
diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
index fa3ee85a99c1..599b28c8a340 100644
--- a/drivers/net/dsa/mt7530-mdio.c
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -18,7 +18,8 @@
static int
mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
{
- struct mii_bus *bus = context;
+ struct mt7530_priv *priv = context;
+ struct mii_bus *bus = priv->bus;
u16 page, r, lo, hi;
int ret;
@@ -27,36 +28,35 @@ mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
lo = val & 0xffff;
hi = val >> 16;
- /* MT7530 uses 31 as the pseudo port */
- ret = bus->write(bus, 0x1f, 0x1f, page);
+ ret = bus->write(bus, priv->phy_addr, 0x1f, page);
if (ret < 0)
return ret;
- ret = bus->write(bus, 0x1f, r, lo);
+ ret = bus->write(bus, priv->phy_addr, r, lo);
if (ret < 0)
return ret;
- ret = bus->write(bus, 0x1f, 0x10, hi);
+ ret = bus->write(bus, priv->phy_addr, 0x10, hi);
return ret;
}
static int
mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
{
- struct mii_bus *bus = context;
+ struct mt7530_priv *priv = context;
+ struct mii_bus *bus = priv->bus;
u16 page, r, lo, hi;
int ret;
page = (reg >> 6) & 0x3ff;
r = (reg >> 2) & 0xf;
- /* MT7530 uses 31 as the pseudo port */
- ret = bus->write(bus, 0x1f, 0x1f, page);
+ ret = bus->write(bus, priv->phy_addr, 0x1f, page);
if (ret < 0)
return ret;
- lo = bus->read(bus, 0x1f, r);
- hi = bus->read(bus, 0x1f, 0x10);
+ lo = bus->read(bus, priv->phy_addr, r);
+ hi = bus->read(bus, priv->phy_addr, 0x10);
*val = (hi << 16) | (lo & 0xffff);
@@ -107,8 +107,7 @@ mt7531_create_sgmii(struct mt7530_priv *priv)
mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
- regmap = devm_regmap_init(priv->dev,
- &mt7530_regmap_bus, priv->bus,
+ regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
mt7531_pcs_config[i]);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
@@ -153,6 +152,7 @@ mt7530_probe(struct mdio_device *mdiodev)
priv->bus = mdiodev->bus;
priv->dev = &mdiodev->dev;
+ priv->phy_addr = mdiodev->addr;
ret = mt7530_probe_common(priv);
if (ret)
@@ -203,8 +203,8 @@ mt7530_probe(struct mdio_device *mdiodev)
regmap_config->reg_stride = 4;
regmap_config->max_register = MT7530_CREV;
regmap_config->disable_locking = true;
- priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
- priv->bus, regmap_config);
+ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
+ regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c0d0bce0b594..fefa6dd151fa 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -86,22 +86,26 @@ core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
int value, ret;
/* Write the desired MMD Devad */
- ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
- ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, prtad);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
- ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
/* Read the content of the MMD's selected register */
- value = bus->read(bus, 0, MII_MMD_DATA);
+ value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA);
return value;
err:
@@ -118,22 +122,26 @@ core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
int ret;
/* Write the desired MMD Devad */
- ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
- ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, prtad);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
- ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
/* Write the data into MMD's selected register */
- ret = bus->write(bus, 0, MII_MMD_DATA, data);
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, data);
err:
if (ret < 0)
dev_err(&bus->dev,
@@ -2671,16 +2679,17 @@ mt7531_setup(struct dsa_switch *ds)
* phy_[read,write]_mmd_indirect is called, we provide our own
* mt7531_ind_mmd_phy_[read,write] to complete this function.
*/
- val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
+ val = mt7531_ind_c45_phy_read(priv,
+ MT753X_CTRL_PHY_ADDR(priv->phy_addr),
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
val &= ~MT7531_PHY_PLL_OFF;
- mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
- CORE_PLL_GROUP4, val);
+ mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MDIO_MMD_VEND2, CORE_PLL_GROUP4, val);
/* Disable EEE advertisement on the switch PHYs. */
- for (i = MT753X_CTRL_PHY_ADDR;
- i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
+ for (i = MT753X_CTRL_PHY_ADDR(priv->phy_addr);
+ i < MT753X_CTRL_PHY_ADDR(priv->phy_addr) + MT7530_NUM_PHYS; i++) {
mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
0);
}
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 585db03c0548..76adc9d21bcf 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -625,7 +625,7 @@ enum mt7531_clk_skew {
#define MT7531_PHY_PLL_OFF BIT(5)
#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
-#define MT753X_CTRL_PHY_ADDR 0
+#define MT753X_CTRL_PHY_ADDR(phy_addr) (phy_addr == 0x1f ? 0 : phy_addr + 1)
#define CORE_PLL_GROUP5 0x404
#define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff)
@@ -774,6 +774,7 @@ struct mt753x_info {
* @irq_enable: IRQ enable bits, synced to SYS_INT_EN
* @create_sgmii: Pointer to function creating SGMII PCS instance(s)
* @active_cpu_ports: Holding the active CPU ports
+ * @phy_addr: Holding the PHY address the switch listens on
*/
struct mt7530_priv {
struct device *dev;
@@ -800,6 +801,7 @@ struct mt7530_priv {
u32 irq_enable;
int (*create_sgmii)(struct mt7530_priv *priv);
u8 active_cpu_ports;
+ int phy_addr;
};
struct mt7530_hw_vlan_entry {
--
2.40.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations
2024-04-13 22:08 [PATCH net-next 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver Arınç ÜNAL
2024-04-13 22:08 ` [PATCH net-next 1/2] net: dsa: mt7530-mdio: read PHY address of switch from device tree Arınç ÜNAL
@ 2024-04-13 22:08 ` Arınç ÜNAL
1 sibling, 0 replies; 3+ messages in thread
From: Arınç ÜNAL @ 2024-04-13 22:08 UTC (permalink / raw)
To: Daniel Golle, DENG Qingfang, Sean Wang, Andrew Lunn,
Florian Fainelli, Vladimir Oltean, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Matthias Brugger,
AngeloGioacchino Del Regno
Cc: Bartel Eerdekens, mithat.guner, erkin.bozoglu, netdev,
linux-kernel, linux-arm-kernel, linux-mediatek,
Arınç ÜNAL
The core_rmw() function calls core_read_mmd_indirect() to read the
requested register, and then calls core_write_mmd_indirect() to write the
requested value to the register. Because Clause 22 is used to access Clause
45 registers, some operations on core_write_mmd_indirect() are
unnecessarily run. Get rid of core_read_mmd_indirect() and
core_write_mmd_indirect(), and run only the necessary operations on
core_write() and core_rmw().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 108 +++++++++++++++++++----------------------------
1 file changed, 43 insertions(+), 65 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fefa6dd151fa..2650eacf87a7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -74,116 +74,94 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
MIB_DESC(1, 0xb8, "RxArlDrop"),
};
-/* Since phy_device has not yet been created and
- * phy_{read,write}_mmd_indirect is not available, we provide our own
- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
- * to complete this function.
- */
-static int
-core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+static void
+mt7530_mutex_lock(struct mt7530_priv *priv)
+{
+ if (priv->bus)
+ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mutex_unlock(struct mt7530_priv *priv)
+{
+ if (priv->bus)
+ mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
- int value, ret;
+ int ret;
+
+ mt7530_mutex_lock(priv);
/* Write the desired MMD Devad */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad);
+ MII_MMD_CTRL, MDIO_MMD_VEND2);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, prtad);
+ MII_MMD_DATA, reg);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+ MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
- /* Read the content of the MMD's selected register */
- value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA);
-
- return value;
+ /* Write the data into MMD's selected register */
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, val);
err:
- dev_err(&bus->dev, "failed to read mmd register\n");
+ if (ret < 0)
+ dev_err(&bus->dev, "failed to write mmd register\n");
- return ret;
+ mt7530_mutex_unlock(priv);
}
-static int
-core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
- int devad, u32 data)
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
{
struct mii_bus *bus = priv->bus;
+ u32 val;
int ret;
+ mt7530_mutex_lock(priv);
+
/* Write the desired MMD Devad */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad);
+ MII_MMD_CTRL, MDIO_MMD_VEND2);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, prtad);
+ MII_MMD_DATA, reg);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+ MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
+ /* Read the content of the MMD's selected register */
+ val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA);
+ val &= ~mask;
+ val |= set;
/* Write the data into MMD's selected register */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, data);
+ MII_MMD_DATA, val);
err:
if (ret < 0)
- dev_err(&bus->dev,
- "failed to write mmd register\n");
- return ret;
-}
-
-static void
-mt7530_mutex_lock(struct mt7530_priv *priv)
-{
- if (priv->bus)
- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-}
-
-static void
-mt7530_mutex_unlock(struct mt7530_priv *priv)
-{
- if (priv->bus)
- mutex_unlock(&priv->bus->mdio_lock);
-}
-
-static void
-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7530_mutex_lock(priv);
-
- core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-
- mt7530_mutex_unlock(priv);
-}
-
-static void
-core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
-{
- u32 val;
-
- mt7530_mutex_lock(priv);
-
- val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
- val &= ~mask;
- val |= set;
- core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+ dev_err(&bus->dev, "failed to write mmd register\n");
mt7530_mutex_unlock(priv);
}
--
2.40.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-04-13 22:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-13 22:08 [PATCH net-next 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver Arınç ÜNAL
2024-04-13 22:08 ` [PATCH net-next 1/2] net: dsa: mt7530-mdio: read PHY address of switch from device tree Arınç ÜNAL
2024-04-13 22:08 ` [PATCH net-next 2/2] net: dsa: mt7530: simplify core operations Arınç ÜNAL
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).