From: Krzysztof Adamski <k@japko.eu>
To: inus Walleij <linus.walleij@linaro.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>, Hans de Goede <hdegoede@redhat.com>,
Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Jens Kuske <jenskuske@gmail.com>,
Fabian Frederick <fabf@skynet.be>,
Vishnu Patekar <vishnupatekar0510@gmail.com>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Cc: Krzysztof Adamski <k@japko.eu>
Subject: [PATCH v3 3/5] pinctrl: sunxi: Add H3 R_PIO controller support
Date: Thu, 4 Feb 2016 00:33:48 +0100 [thread overview]
Message-ID: <1454542430-16572-4-git-send-email-k@japko.eu> (raw)
In-Reply-To: <1454542430-16572-1-git-send-email-k@japko.eu>
H3 has additional PIO controller similar to what we can find on A23.
It's a 12 pin port, described in H3 Datasheet rev 1.1, pages 345-350.
Signed-off-by: Krzysztof Adamski <k@japko.eu>
---
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 +
drivers/pinctrl/sunxi/Kconfig | 4 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c | 106 +++++++++++++++++++++
4 files changed, 112 insertions(+)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 9213b27..3e56b16 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -21,6 +21,7 @@ Required properties:
"allwinner,sun9i-a80-r-pinctrl"
"allwinner,sun8i-a83t-pinctrl"
"allwinner,sun8i-h3-pinctrl"
+ "allwinner,sun8i-h3-r-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index f8dbc8b..75a26c9 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -55,6 +55,10 @@ config PINCTRL_SUN8I_H3
def_bool MACH_SUN8I
select PINCTRL_SUNXI_COMMON
+config PINCTRL_SUN8I_H3_R
+ def_bool MACH_SUN8I
+ select PINCTRL_SUNXI_COMMON
+
config PINCTRL_SUN9I_A80
def_bool MACH_SUN9I
select PINCTRL_SUNXI_COMMON
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index ef82f22..a5d56f1 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
+obj-$(CONFIG_PINCTRL_SUN8I_H3_R) += pinctrl-sun8i-h3-r.o
obj-$(CONFIG_PINCTRL_SUN9I_A80) += pinctrl-sun9i-a80.o
obj-$(CONFIG_PINCTRL_SUN9I_A80_R) += pinctrl-sun9i-a80-r.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c
new file mode 100644
index 0000000..686ec21
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3-r.c
@@ -0,0 +1,106 @@
+/*
+ * Allwinner H3 SoCs pinctrl driver.
+ *
+ * Copyright (C) 2016 Krzysztof Adamski <k@japko.eu>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun8i_h3_r_pins[] = {
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_twi"), /* SCK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PL_EINT0 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_twi"), /* SDA */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PL_EINT1 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_uart"), /* TX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PL_EINT2 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_uart"), /* RX */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PL_EINT3 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* MS */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PL_EINT4 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* CK */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PL_EINT5 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* DO */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PL_EINT6 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_jtag"), /* DI */
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PL_EINT7 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PL_EINT8 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PL_EINT9 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_pwm"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PL_EINT10 */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_cir_rx"),
+ SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PL_EINT11 */
+};
+
+static const struct sunxi_pinctrl_desc sun8i_h3_r_pinctrl_data = {
+ .pins = sun8i_h3_r_pins,
+ .npins = ARRAY_SIZE(sun8i_h3_r_pins),
+ .irq_banks = 1,
+ .pin_base = PL_BASE,
+ .irq_read_needs_mux = true
+};
+
+static int sun8i_h3_r_pinctrl_probe(struct platform_device *pdev)
+{
+ return sunxi_pinctrl_init(pdev,
+ &sun8i_h3_r_pinctrl_data);
+}
+
+static const struct of_device_id sun8i_h3_r_pinctrl_match[] = {
+ { .compatible = "allwinner,sun8i-h3-r-pinctrl", },
+ {}
+};
+
+static struct platform_driver sun8i_h3_r_pinctrl_driver = {
+ .probe = sun8i_h3_r_pinctrl_probe,
+ .driver = {
+ .name = "sun8i-h3-r-pinctrl",
+ .of_match_table = sun8i_h3_r_pinctrl_match,
+ },
+};
+builtin_platform_driver(sun8i_h3_r_pinctrl_driver);
--
2.1.4
next prev parent reply other threads:[~2016-02-03 23:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 23:33 [PATCH v3 0/5] pinctrl: sunxi: Add H3 R_PIO controller support Krzysztof Adamski
2016-02-03 23:33 ` [PATCH v3 1/5] clk: sunxi: Add apb0 gates for H3 Krzysztof Adamski
2016-02-04 14:47 ` Jean-Francois Moine
2016-02-04 20:56 ` Krzysztof Adamski
2016-02-05 11:14 ` Maxime Ripard
2016-02-05 11:11 ` Maxime Ripard
2016-02-05 11:58 ` Krzysztof Adamski
2016-02-09 17:10 ` Maxime Ripard
2016-02-10 7:17 ` [linux-sunxi] " Krzysztof Adamski
2016-02-10 15:06 ` Maxime Ripard
2016-02-06 10:26 ` Jean-Francois Moine
2016-02-09 17:11 ` Maxime Ripard
2016-02-03 23:33 ` [PATCH v3 2/5] dts: sun8i-h3: Add APB0 related clocks and resets Krzysztof Adamski
2016-02-03 23:33 ` Krzysztof Adamski [this message]
2016-02-05 9:44 ` [PATCH v3 3/5] pinctrl: sunxi: Add H3 R_PIO controller support Chen-Yu Tsai
2016-02-05 9:46 ` Maxime Ripard
2016-02-03 23:33 ` [PATCH v3 4/5] ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi Krzysztof Adamski
2016-02-05 9:46 ` Chen-Yu Tsai
2016-02-08 8:39 ` Krzysztof Adamski
2016-02-03 23:33 ` [PATCH v3 5/5] pinctrl: sunxi: Use pin number when calling sunxi_pmx_set Krzysztof Adamski
2016-02-05 9:45 ` Chen-Yu Tsai
2016-02-05 11:15 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454542430-16572-4-git-send-email-k@japko.eu \
--to=k@japko.eu \
--cc=fabf@skynet.be \
--cc=hdegoede@redhat.com \
--cc=jenskuske@gmail.com \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh@kernel.org \
--cc=vishnupatekar0510@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).