* [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing
@ 2021-04-05 11:35 Phillip Potter
2021-04-05 21:59 ` David Miller
2021-04-06 17:26 ` Eric Dumazet
0 siblings, 2 replies; 5+ messages in thread
From: Phillip Potter @ 2021-04-05 11:35 UTC (permalink / raw)
To: davem; +Cc: kuba, netdev, linux-kernel
When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
to match the appropriate type, using new tun_get_addr_len utility function
which returns appropriate address length for given type. Fixes a
KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51
Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
drivers/net/tun.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 978ac0981d16..56c26339ee3b 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -69,6 +69,14 @@
#include <linux/bpf.h>
#include <linux/bpf_trace.h>
#include <linux/mutex.h>
+#include <linux/ieee802154.h>
+#include <linux/if_ltalk.h>
+#include <uapi/linux/if_fddi.h>
+#include <uapi/linux/if_hippi.h>
+#include <uapi/linux/if_fc.h>
+#include <net/ax25.h>
+#include <net/rose.h>
+#include <net/6lowpan.h>
#include <linux/uaccess.h>
#include <linux/proc_fs.h>
@@ -2925,6 +2933,45 @@ static int tun_set_ebpf(struct tun_struct *tun, struct tun_prog __rcu **prog_p,
return __tun_set_ebpf(tun, prog_p, prog);
}
+/* Return correct value for tun->dev->addr_len based on tun->dev->type. */
+static inline unsigned char tun_get_addr_len(unsigned short type)
+{
+ switch (type) {
+ case ARPHRD_IP6GRE:
+ case ARPHRD_TUNNEL6:
+ return sizeof(struct in6_addr);
+ case ARPHRD_IPGRE:
+ case ARPHRD_TUNNEL:
+ case ARPHRD_SIT:
+ return 4;
+ case ARPHRD_ETHER:
+ return ETH_ALEN;
+ case ARPHRD_IEEE802154:
+ case ARPHRD_IEEE802154_MONITOR:
+ return IEEE802154_EXTENDED_ADDR_LEN;
+ case ARPHRD_PHONET_PIPE:
+ case ARPHRD_PPP:
+ case ARPHRD_NONE:
+ return 0;
+ case ARPHRD_6LOWPAN:
+ return EUI64_ADDR_LEN;
+ case ARPHRD_FDDI:
+ return FDDI_K_ALEN;
+ case ARPHRD_HIPPI:
+ return HIPPI_ALEN;
+ case ARPHRD_IEEE802:
+ return FC_ALEN;
+ case ARPHRD_ROSE:
+ return ROSE_ADDR_LEN;
+ case ARPHRD_NETROM:
+ return AX25_ADDR_LEN;
+ case ARPHRD_LOCALTLK:
+ return LTALK_ALEN;
+ default:
+ return 0;
+ }
+}
+
static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
unsigned long arg, int ifreq_len)
{
@@ -3088,6 +3135,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
break;
}
tun->dev->type = (int) arg;
+ tun->dev->addr_len = tun_get_addr_len(tun->dev->type);
netif_info(tun, drv, tun->dev, "linktype set to %d\n",
tun->dev->type);
call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE,
--
2.30.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing
2021-04-05 11:35 [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing Phillip Potter
@ 2021-04-05 21:59 ` David Miller
2021-04-06 10:18 ` Phillip Potter
2021-04-06 17:26 ` Eric Dumazet
1 sibling, 1 reply; 5+ messages in thread
From: David Miller @ 2021-04-05 21:59 UTC (permalink / raw)
To: phil; +Cc: kuba, netdev, linux-kernel
From: Phillip Potter <phil@philpotter.co.uk>
Date: Mon, 5 Apr 2021 12:35:55 +0100
> When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
> to match the appropriate type, using new tun_get_addr_len utility function
> which returns appropriate address length for given type. Fixes a
> KMSAN-found uninit-value bug reported by syzbot at:
> https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51
>
> Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
> Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> ---
> drivers/net/tun.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/drivers/net/tun.c b/drivers/net/tun.c
> index 978ac0981d16..56c26339ee3b 100644
> --- a/drivers/net/tun.c
> +++ b/drivers/net/tun.c
> @@ -69,6 +69,14 @@
> #include <linux/bpf.h>
> #include <linux/bpf_trace.h>
> #include <linux/mutex.h>
> +#include <linux/ieee802154.h>
> +#include <linux/if_ltalk.h>
> +#include <uapi/linux/if_fddi.h>
> +#include <uapi/linux/if_hippi.h>
> +#include <uapi/linux/if_fc.h>
> +#include <net/ax25.h>
> +#include <net/rose.h>
> +#include <net/6lowpan.h>
>
> #include <linux/uaccess.h>
> #include <linux/proc_fs.h>
> @@ -2925,6 +2933,45 @@ static int tun_set_ebpf(struct tun_struct *tun, struct tun_prog __rcu **prog_p,
> return __tun_set_ebpf(tun, prog_p, prog);
> }
>
> +/* Return correct value for tun->dev->addr_len based on tun->dev->type. */
> +static inline unsigned char tun_get_addr_len(unsigned short type)
> +{
Please do not use inline in foo.c files, let the compiler decide.
Thanks.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing
2021-04-05 21:59 ` David Miller
@ 2021-04-06 10:18 ` Phillip Potter
0 siblings, 0 replies; 5+ messages in thread
From: Phillip Potter @ 2021-04-06 10:18 UTC (permalink / raw)
To: David Miller; +Cc: kuba, netdev, linux-kernel
On Mon, Apr 05, 2021 at 02:59:21PM -0700, David Miller wrote:
> From: Phillip Potter <phil@philpotter.co.uk>
> Date: Mon, 5 Apr 2021 12:35:55 +0100
>
> > When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
> > to match the appropriate type, using new tun_get_addr_len utility function
> > which returns appropriate address length for given type. Fixes a
> > KMSAN-found uninit-value bug reported by syzbot at:
> > https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51
> >
> > Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
> > Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> > ---
> > drivers/net/tun.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 48 insertions(+)
> >
> > diff --git a/drivers/net/tun.c b/drivers/net/tun.c
> > index 978ac0981d16..56c26339ee3b 100644
> > --- a/drivers/net/tun.c
> > +++ b/drivers/net/tun.c
> > @@ -69,6 +69,14 @@
> > #include <linux/bpf.h>
> > #include <linux/bpf_trace.h>
> > #include <linux/mutex.h>
> > +#include <linux/ieee802154.h>
> > +#include <linux/if_ltalk.h>
> > +#include <uapi/linux/if_fddi.h>
> > +#include <uapi/linux/if_hippi.h>
> > +#include <uapi/linux/if_fc.h>
> > +#include <net/ax25.h>
> > +#include <net/rose.h>
> > +#include <net/6lowpan.h>
> >
> > #include <linux/uaccess.h>
> > #include <linux/proc_fs.h>
> > @@ -2925,6 +2933,45 @@ static int tun_set_ebpf(struct tun_struct *tun, struct tun_prog __rcu **prog_p,
> > return __tun_set_ebpf(tun, prog_p, prog);
> > }
> >
> > +/* Return correct value for tun->dev->addr_len based on tun->dev->type. */
> > +static inline unsigned char tun_get_addr_len(unsigned short type)
> > +{
>
> Please do not use inline in foo.c files, let the compiler decide.
>
> Thanks.
Dear David,
Thank you for the feedback, I will resend.
Regards,
Phil
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing
2021-04-05 11:35 [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing Phillip Potter
2021-04-05 21:59 ` David Miller
@ 2021-04-06 17:26 ` Eric Dumazet
2021-04-06 17:38 ` Phillip Potter
1 sibling, 1 reply; 5+ messages in thread
From: Eric Dumazet @ 2021-04-06 17:26 UTC (permalink / raw)
To: Phillip Potter, davem; +Cc: kuba, netdev, linux-kernel
On 4/5/21 1:35 PM, Phillip Potter wrote:
> When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
> to match the appropriate type, using new tun_get_addr_len utility function
> which returns appropriate address length for given type. Fixes a
> KMSAN-found uninit-value bug reported by syzbot at:
> https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51
>
> Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
> Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> ---
Please give credits to people who helped.
You could have :
Suggested-by: Eric Dumazet <edumazet@google.com>
Or
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Or at least CCed me :/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing
2021-04-06 17:26 ` Eric Dumazet
@ 2021-04-06 17:38 ` Phillip Potter
0 siblings, 0 replies; 5+ messages in thread
From: Phillip Potter @ 2021-04-06 17:38 UTC (permalink / raw)
To: Eric Dumazet; +Cc: kuba, netdev, linux-kernel, davem
On Tue, Apr 06, 2021 at 07:26:29PM +0200, Eric Dumazet wrote:
>
>
> On 4/5/21 1:35 PM, Phillip Potter wrote:
> > When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
> > to match the appropriate type, using new tun_get_addr_len utility function
> > which returns appropriate address length for given type. Fixes a
> > KMSAN-found uninit-value bug reported by syzbot at:
> > https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51
> >
> > Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
> > Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
> > ---
>
> Please give credits to people who helped.
>
> You could have :
>
> Suggested-by: Eric Dumazet <edumazet@google.com>
>
> Or
> Diagnosed-by: Eric Dumazet <edumazet@google.com>
>
> Or at least CCed me :/
>
Dear Eric,
Please accept my apology for this oversight. It certainly wasn't
intentional on my part, and entirely down to inexperience. I will send
the patch again with Diagnosed-by.
Regards,
Phil
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-04-06 17:39 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-05 11:35 [PATCH] net: tun: set tun->dev->addr_len during TUNSETLINK processing Phillip Potter
2021-04-05 21:59 ` David Miller
2021-04-06 10:18 ` Phillip Potter
2021-04-06 17:26 ` Eric Dumazet
2021-04-06 17:38 ` Phillip Potter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).