* [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support
@ 2024-04-25 2:33 Sky Huang
2024-04-25 2:33 ` [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers Sky Huang
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Sky Huang @ 2024-04-25 2:33 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Daniel Golle,
Qingfang Deng, SkyLake Huang, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, netdev,
linux-arm-kernel, linux-mediatek
Cc: Steven Liu, SkyLake.Huang
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Re-organize MTK ethernet phy drivers and integrate common manipulations
into mtk-phy-lib. Also, add support for build-in 2.5Gphy on MT7988.
SkyLake.Huang (3):
net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
net: phy: mediatek: Add mtk phy lib for token ring access & LED/other
manipulations
net: phy: mediatek: add support for built-in 2.5G ethernet PHY on
MT7988
MAINTAINERS | 7 +-
drivers/net/phy/Kconfig | 17 +-
drivers/net/phy/Makefile | 3 +-
drivers/net/phy/mediatek-ge.c | 111 ----
drivers/net/phy/mediatek/Kconfig | 33 ++
drivers/net/phy/mediatek/Makefile | 5 +
drivers/net/phy/mediatek/mtk-2p5ge.c | 399 +++++++++++++
.../mtk-ge-soc.c} | 522 ++++++++----------
drivers/net/phy/mediatek/mtk-ge.c | 191 +++++++
drivers/net/phy/mediatek/mtk-phy-lib.c | 330 +++++++++++
drivers/net/phy/mediatek/mtk.h | 97 ++++
11 files changed, 1277 insertions(+), 438 deletions(-)
delete mode 100644 drivers/net/phy/mediatek-ge.c
create mode 100644 drivers/net/phy/mediatek/Kconfig
create mode 100644 drivers/net/phy/mediatek/Makefile
create mode 100644 drivers/net/phy/mediatek/mtk-2p5ge.c
rename drivers/net/phy/{mediatek-ge-soc.c => mediatek/mtk-ge-soc.c} (79%)
create mode 100644 drivers/net/phy/mediatek/mtk-ge.c
create mode 100644 drivers/net/phy/mediatek/mtk-phy-lib.c
create mode 100644 drivers/net/phy/mediatek/mtk.h
--
2.18.0
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
2024-04-25 2:33 [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Sky Huang
@ 2024-04-25 2:33 ` Sky Huang
2024-04-25 15:04 ` Andrew Lunn
2024-04-26 2:27 ` kernel test robot
2024-04-25 2:33 ` [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations Sky Huang
` (2 subsequent siblings)
3 siblings, 2 replies; 11+ messages in thread
From: Sky Huang @ 2024-04-25 2:33 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Daniel Golle,
Qingfang Deng, SkyLake Huang, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, netdev,
linux-arm-kernel, linux-mediatek
Cc: Steven Liu, SkyLake.Huang
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions and add new 2.5G phy driver.
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
MAINTAINERS | 4 ++--
drivers/net/phy/Kconfig | 17 +----------------
drivers/net/phy/Makefile | 3 +--
drivers/net/phy/mediatek/Kconfig | 17 +++++++++++++++++
drivers/net/phy/mediatek/Makefile | 3 +++
.../mtk-ge-soc.c} | 0
.../phy/{mediatek-ge.c => mediatek/mtk-ge.c} | 0
7 files changed, 24 insertions(+), 20 deletions(-)
create mode 100644 drivers/net/phy/mediatek/Kconfig
create mode 100644 drivers/net/phy/mediatek/Makefile
rename drivers/net/phy/{mediatek-ge-soc.c => mediatek/mtk-ge-soc.c} (100%)
rename drivers/net/phy/{mediatek-ge.c => mediatek/mtk-ge.c} (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index a7ff3c758535..b59edadfb8fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13908,8 +13908,8 @@ M: Qingfang Deng <dqfext@gmail.com>
M: SkyLake Huang <SkyLake.Huang@mediatek.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/phy/mediatek-ge-soc.c
-F: drivers/net/phy/mediatek-ge.c
+F: drivers/net/phy/mediatek/mtk-ge-soc.c
+F: drivers/net/phy/mediatek/mtk-ge.c
F: drivers/phy/mediatek/phy-mtk-xfi-tphy.c
MEDIATEK I2C CONTROLLER DRIVER
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 7fddc8306d82..c5ff747bb277 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -256,22 +256,7 @@ config MAXLINEAR_GPHY
Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
GPY241, GPY245 PHYs.
-config MEDIATEK_GE_PHY
- tristate "MediaTek Gigabit Ethernet PHYs"
- help
- Supports the MediaTek Gigabit Ethernet PHYs.
-
-config MEDIATEK_GE_SOC_PHY
- tristate "MediaTek SoC Ethernet PHYs"
- depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
- depends on NVMEM_MTK_EFUSE
- help
- Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-
- Include support for built-in Ethernet PHYs which are present in
- the MT7981 and MT7988 SoCs. These PHYs need calibration data
- present in the SoCs efuse and will dynamically calibrate VCM
- (common-mode voltage) during startup.
+source "drivers/net/phy/mediatek/Kconfig"
config MICREL_PHY
tristate "Micrel PHYs"
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1d8be374915f..c0eb595ca773 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -72,8 +72,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_MARVELL_88Q2XXX_PHY) += marvell-88q2xxx.o
obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
-obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
-obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
+obj-y += mediatek/
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
diff --git a/drivers/net/phy/mediatek/Kconfig b/drivers/net/phy/mediatek/Kconfig
new file mode 100644
index 000000000000..5f97e27af600
--- /dev/null
+++ b/drivers/net/phy/mediatek/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MEDIATEK_GE_PHY
+ tristate "MediaTek Gigabit Ethernet PHYs"
+ help
+ Supports the MediaTek Gigabit Ethernet PHYs.
+
+config MEDIATEK_GE_SOC_PHY
+ bool "MediaTek SoC Ethernet PHYs"
+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
+ select NVMEM_MTK_EFUSE
+ help
+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
+
+ Include support for built-in Ethernet PHYs which are present in
+ the MT7981 and MT7988 SoCs. These PHYs need calibration data
+ present in the SoCs efuse and will dynamically calibrate VCM
+ (common-mode voltage) during startup.
diff --git a/drivers/net/phy/mediatek/Makefile b/drivers/net/phy/mediatek/Makefile
new file mode 100644
index 000000000000..005bde26c1d7
--- /dev/null
+++ b/drivers/net/phy/mediatek/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
diff --git a/drivers/net/phy/mediatek-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
similarity index 100%
rename from drivers/net/phy/mediatek-ge-soc.c
rename to drivers/net/phy/mediatek/mtk-ge-soc.c
diff --git a/drivers/net/phy/mediatek-ge.c b/drivers/net/phy/mediatek/mtk-ge.c
similarity index 100%
rename from drivers/net/phy/mediatek-ge.c
rename to drivers/net/phy/mediatek/mtk-ge.c
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations
2024-04-25 2:33 [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Sky Huang
2024-04-25 2:33 ` [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers Sky Huang
@ 2024-04-25 2:33 ` Sky Huang
2024-04-25 15:13 ` Andrew Lunn
2024-04-25 18:05 ` kernel test robot
2024-04-25 2:33 ` [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988 Sky Huang
2024-04-25 3:05 ` [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Daniel Golle
3 siblings, 2 replies; 11+ messages in thread
From: Sky Huang @ 2024-04-25 2:33 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Daniel Golle,
Qingfang Deng, SkyLake Huang, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, netdev,
linux-arm-kernel, linux-mediatek
Cc: Steven Liu, SkyLake.Huang
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Integrate some common phy manipulations in mtk-phy-lib:
1. Token ring access: This is proprietary register access on page 52b5.
Use these APIs so we can see which fields we're going to modify/set/clear.
2. LED: External/internal giga & internal 2.5g phy share almost the same
LED control registers/logic.
3. Extend 1G TX/RX link pulse time: We observe that some devices' 1G
training time violates specification, which may last 2230ms and affect
later TX/RX link pulse time. So we try to extend our 1G TX/RX link pulse
time so that we can still detect such devices.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
MAINTAINERS | 2 +
drivers/net/phy/mediatek/Kconfig | 5 +
drivers/net/phy/mediatek/Makefile | 1 +
drivers/net/phy/mediatek/mtk-ge-soc.c | 522 ++++++++++---------------
drivers/net/phy/mediatek/mtk-ge.c | 148 +++++--
drivers/net/phy/mediatek/mtk-phy-lib.c | 330 ++++++++++++++++
drivers/net/phy/mediatek/mtk.h | 97 +++++
7 files changed, 764 insertions(+), 341 deletions(-)
create mode 100644 drivers/net/phy/mediatek/mtk-phy-lib.c
create mode 100644 drivers/net/phy/mediatek/mtk.h
diff --git a/MAINTAINERS b/MAINTAINERS
index b59edadfb8fe..1dbecd14572e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13909,7 +13909,9 @@ M: SkyLake Huang <SkyLake.Huang@mediatek.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/phy/mediatek/mtk-ge-soc.c
+F: drivers/net/phy/mediatek/mtk-phy-lib.c
F: drivers/net/phy/mediatek/mtk-ge.c
+F: drivers/net/phy/mediatek/mtk.h
F: drivers/phy/mediatek/phy-mtk-xfi-tphy.c
MEDIATEK I2C CONTROLLER DRIVER
diff --git a/drivers/net/phy/mediatek/Kconfig b/drivers/net/phy/mediatek/Kconfig
index 5f97e27af600..c2aabed185a2 100644
--- a/drivers/net/phy/mediatek/Kconfig
+++ b/drivers/net/phy/mediatek/Kconfig
@@ -1,6 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
+config MTK_NET_PHYLIB
+ tristate
+
config MEDIATEK_GE_PHY
tristate "MediaTek Gigabit Ethernet PHYs"
+ select MTK_NET_PHYLIB
help
Supports the MediaTek Gigabit Ethernet PHYs.
@@ -8,6 +12,7 @@ config MEDIATEK_GE_SOC_PHY
bool "MediaTek SoC Ethernet PHYs"
depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
select NVMEM_MTK_EFUSE
+ select MTK_NET_PHYLIB
help
Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
diff --git a/drivers/net/phy/mediatek/Makefile b/drivers/net/phy/mediatek/Makefile
index 005bde26c1d7..814879d0abe5 100644
--- a/drivers/net/phy/mediatek/Makefile
+++ b/drivers/net/phy/mediatek/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_MTK_NET_PHYLIB) += mtk-phy-lib.o
obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
diff --git a/drivers/net/phy/mediatek/mtk-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
index 0f3a1538a8b8..991c5b608db4 100644
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -8,6 +8,8 @@
#include <linux/phy.h>
#include <linux/regmap.h>
+#include "mtk.h"
+
#define MTK_GPHY_ID_MT7981 0x03a29461
#define MTK_GPHY_ID_MT7988 0x03a29481
@@ -22,7 +24,78 @@
#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x0, node_addr = 0x7, data_addr = 0x15 */
+#define NORMAL_MSE_LO_THRESH_MASK GENMASK(15, 8) /* NormMseLoThresh */
+
+/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x3c */
+#define REMOTE_ACK_COUNT_LIMIT_CTRL_MASK GENMASK(2, 1) /* RemAckCntLimitCtrl */
+
+/* ch_addr = 0x1, node_addr = 0xd, data_addr = 0x20 */
+#define VCO_SLICER_THRESH_HIGH_MASK GENMASK(23, 0) /* VcoSlicerThreshBitsHigh */
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x0 */
+#define DFE_TAIL_EANBLE_VGA_TRHESH_1000 GENMASK(5, 1) /* DfeTailEnableVgaThresh1000 */
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x1 */
+#define MRVL_TR_FIX_100KP_MASK GENMASK(22, 20) /* MrvlTrFix100Kp */
+#define MRVL_TR_FIX_100KF_MASK GENMASK(19, 17) /* MrvlTrFix100Kf */
+#define MRVL_TR_FIX_1000KP_MASK GENMASK(16, 14) /* MrvlTrFix1000Kp */
+#define MRVL_TR_FIX_1000KF_MASK GENMASK(13, 11) /* MrvlTrFix1000Kf */
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x12 */
+#define VGA_DECIMATION_RATE_MASK GENMASK(8, 5) /* VgaDecRate */
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x17 */
+#define SLAVE_DSP_READY_TIME_MASK GENMASK(22, 15) /* SlvDSPreadyTime */
+#define MASTER_DSP_READY_TIME_MASK GENMASK(14, 7) /* MasDSPreadyTime */
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x18 */
+#define ENABLE_RANDOM_UPDOWN_COUNTER_TRIGGER BIT(8) /* EnabRandUpdTrig */
+
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x20 */
+#define RESET_SYNC_OFFSET_MASK GENMASK(11, 8) /* ResetSyncOffset */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x0 */
+#define FFE_UPDATE_GAIN_FORCE_VAL_MASK GENMASK(9, 7) /* FfeUpdGainForceVal */
+#define FFE_UPDATE_GAIN_FORCE BIT(6) /* FfeUpdGainForce */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x3 */
+#define TR_FREEZE_MASK GENMASK(11, 0) /* TrFreeze */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x6 */
+/* SS: Steady-state, KP: Proportional Gain */
+#define SS_TR_KP100_MASK GENMASK(21, 19) /* SSTrKp100 */
+#define SS_TR_KF100_MASK GENMASK(18, 16) /* SSTrKf100 */
+#define SS_TR_KP1000_MASTER_MASK GENMASK(15, 13) /* SSTrKp1000Mas */
+#define SS_TR_KF1000_MASTER_MASK GENMASK(12, 10) /* SSTrKf1000Mas */
+#define SS_TR_KP1000_SLAVE_MASK GENMASK(9, 7) /* SSTrKp1000Slv */
+#define SS_TR_KF1000_SLAVE_MASK GENMASK(6, 4) /* SSTrKf1000Slv */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x8 */
+/* clear this bit if wanna select from AFE */
+#define EEE1000_SELECT_SIGNEL_DETECTION_FROM_DFE BIT(4) /* Regsigdet_sel_1000 */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0xd */
+#define EEE1000_STAGE2_TR_KF_MASK GENMASK(13, 11) /* RegEEE_st2TrKf1000 */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0xf */
+#define SLAVE_WAKETR_TIMER_MASK GENMASK(20, 11) /* RegEEE_slv_waketr_timer_tar */
+#define SLAVE_REMTX_TIMER_MASK GENMASK(10, 1) /* RegEEE_slv_remtx_timer_tar */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x10 */
+#define SLAVE_WAKEINT_TIMER_MASK GENMASK(10, 1) /* RegEEE_slv_wake_int_timer_tar */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x14 */
+#define TR_FREEZE_TIMER2_MASK GENMASK(9, 0) /* RegEEE_trfreeze_timer2 */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x1c */
+#define EEE100_LPSYNC_STAGE1_UPDATE_TIMER_MASK GENMASK(8, 0) /* RegEEE100Stg1_tar */
+
+/* ch_addr = 0x2, node_addr = 0xd, data_addr = 0x25 */
+#define WAKE_SLAVE_TR_WAIT_DFE_DETECTION_EN BIT(11) /* REGEEE_wake_slv_tr_wait_dfesigdet_en */
+
#define ANALOG_INTERNAL_OPERATION_MAX_US 20
#define TXRESERVE_MIN 0
@@ -210,32 +283,6 @@
#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
/* Registers on MDIO_MMD_VEND2 */
-#define MTK_PHY_LED0_ON_CTRL 0x24
-#define MTK_PHY_LED1_ON_CTRL 0x26
-#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
-#define MTK_PHY_LED_ON_LINK1000 BIT(0)
-#define MTK_PHY_LED_ON_LINK100 BIT(1)
-#define MTK_PHY_LED_ON_LINK10 BIT(2)
-#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
-#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
-#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
-#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
-#define MTK_PHY_LED_ON_POLARITY BIT(14)
-#define MTK_PHY_LED_ON_ENABLE BIT(15)
-
-#define MTK_PHY_LED0_BLINK_CTRL 0x25
-#define MTK_PHY_LED1_BLINK_CTRL 0x27
-#define MTK_PHY_LED_BLINK_1000TX BIT(0)
-#define MTK_PHY_LED_BLINK_1000RX BIT(1)
-#define MTK_PHY_LED_BLINK_100TX BIT(2)
-#define MTK_PHY_LED_BLINK_100RX BIT(3)
-#define MTK_PHY_LED_BLINK_10TX BIT(4)
-#define MTK_PHY_LED_BLINK_10RX BIT(5)
-#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
-#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
-#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
-#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
-
#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1)
#define MTK_PHY_RG_BG_RASEL 0x115
@@ -290,10 +337,6 @@ enum CAL_MODE {
SW_M
};
-#define MTK_PHY_LED_STATE_FORCE_ON 0
-#define MTK_PHY_LED_STATE_FORCE_BLINK 1
-#define MTK_PHY_LED_STATE_NETDEV 2
-
struct mtk_socphy_priv {
unsigned long led_state;
};
@@ -705,40 +748,34 @@ static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
static void mt798x_phy_common_finetune(struct phy_device *phydev)
{
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
- __phy_write(phydev, 0x11, 0xc71);
- __phy_write(phydev, 0x12, 0xc);
- __phy_write(phydev, 0x10, 0x8fae);
-
- /* EnabRandUpdTrig = 1 */
- __phy_write(phydev, 0x11, 0x2f00);
- __phy_write(phydev, 0x12, 0xe);
- __phy_write(phydev, 0x10, 0x8fb0);
-
- /* NormMseLoThresh = 85 */
- __phy_write(phydev, 0x11, 0x55a0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x83aa);
-
- /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */
- __phy_write(phydev, 0x11, 0x240);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9680);
-
- /* TrFreeze = 0 (mt7988 default) */
- __phy_write(phydev, 0x11, 0x0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9686);
-
- /* SSTrKp100 = 5 */
- /* SSTrKf100 = 6 */
- /* SSTrKp1000Mas = 5 */
- /* SSTrKf1000Mas = 6 */
- /* SSTrKp1000Slv = 5 */
- /* SSTrKf1000Slv = 6 */
- __phy_write(phydev, 0x11, 0xbaef);
- __phy_write(phydev, 0x12, 0x2e);
- __phy_write(phydev, 0x10, 0x968c);
+ __tr_modify(phydev, 0x1, 0xf, 0x17,
+ SLAVE_DSP_READY_TIME_MASK | MASTER_DSP_READY_TIME_MASK,
+ FIELD_PREP(SLAVE_DSP_READY_TIME_MASK, 0x18) |
+ FIELD_PREP(MASTER_DSP_READY_TIME_MASK, 0x18));
+
+ __tr_set_bits(phydev, 0x1, 0xf, 0x18, ENABLE_RANDOM_UPDOWN_COUNTER_TRIGGER);
+
+ __tr_modify(phydev, 0x0, 0x7, 0x15,
+ NORMAL_MSE_LO_THRESH_MASK,
+ FIELD_PREP(NORMAL_MSE_LO_THRESH_MASK, 0x55));
+
+ __tr_modify(phydev, 0x2, 0xd, 0x0,
+ FFE_UPDATE_GAIN_FORCE_VAL_MASK,
+ FIELD_PREP(FFE_UPDATE_GAIN_FORCE_VAL_MASK, 0x4) | FFE_UPDATE_GAIN_FORCE);
+
+ __tr_clr_bits(phydev, 0x2, 0xd, 0x3, TR_FREEZE_MASK);
+
+ __tr_modify(phydev, 0x2, 0xd, 0x6,
+ SS_TR_KP100_MASK | SS_TR_KF100_MASK |
+ SS_TR_KP1000_MASTER_MASK | SS_TR_KF1000_MASTER_MASK |
+ SS_TR_KP1000_SLAVE_MASK | SS_TR_KF1000_SLAVE_MASK,
+ FIELD_PREP(SS_TR_KP100_MASK, 0x5) |
+ FIELD_PREP(SS_TR_KF100_MASK, 0x6) |
+ FIELD_PREP(SS_TR_KP1000_MASTER_MASK, 0x5) |
+ FIELD_PREP(SS_TR_KF1000_MASTER_MASK, 0x6) |
+ FIELD_PREP(SS_TR_KP1000_SLAVE_MASK, 0x5) |
+ FIELD_PREP(SS_TR_KF1000_SLAVE_MASK, 0x6));
+
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
}
@@ -761,27 +798,27 @@ static void mt7981_phy_finetune(struct phy_device *phydev)
}
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* ResetSyncOffset = 6 */
- __phy_write(phydev, 0x11, 0x600);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
+ __tr_modify(phydev, 0x1, 0xf, 0x20,
+ RESET_SYNC_OFFSET_MASK, FIELD_PREP(RESET_SYNC_OFFSET_MASK, 0x6));
- /* VgaDecRate = 1 */
- __phy_write(phydev, 0x11, 0x4c2a);
- __phy_write(phydev, 0x12, 0x3e);
- __phy_write(phydev, 0x10, 0x8fa4);
+ __tr_modify(phydev, 0x1, 0xf, 0x12,
+ VGA_DECIMATION_RATE_MASK, FIELD_PREP(VGA_DECIMATION_RATE_MASK, 0x1));
/* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
* MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
*/
- __phy_write(phydev, 0x11, 0xd10a);
- __phy_write(phydev, 0x12, 0x34);
- __phy_write(phydev, 0x10, 0x8f82);
+ __tr_modify(phydev, 0x1, 0xf, 0x1,
+ MRVL_TR_FIX_100KP_MASK | MRVL_TR_FIX_100KF_MASK |
+ MRVL_TR_FIX_1000KP_MASK | MRVL_TR_FIX_1000KF_MASK,
+ FIELD_PREP(MRVL_TR_FIX_100KP_MASK, 0x3) |
+ FIELD_PREP(MRVL_TR_FIX_100KF_MASK, 0x2) |
+ FIELD_PREP(MRVL_TR_FIX_1000KP_MASK, 0x3) |
+ FIELD_PREP(MRVL_TR_FIX_1000KF_MASK, 0x2));
/* VcoSlicerThreshBitsHigh */
- __phy_write(phydev, 0x11, 0x5555);
- __phy_write(phydev, 0x12, 0x55);
- __phy_write(phydev, 0x10, 0x8ec0);
+ __tr_modify(phydev, 0x1, 0xd, 0x20,
+ VCO_SLICER_THRESH_HIGH_MASK,
+ FIELD_PREP(VCO_SLICER_THRESH_HIGH_MASK, 0x555555));
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
@@ -832,25 +869,22 @@ static void mt7988_phy_finetune(struct phy_device *phydev)
phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* ResetSyncOffset = 5 */
- __phy_write(phydev, 0x11, 0x500);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
+ __tr_modify(phydev, 0x1, 0xf, 0x20,
+ RESET_SYNC_OFFSET_MASK, FIELD_PREP(RESET_SYNC_OFFSET_MASK, 0x5));
/* VgaDecRate is 1 at default on mt7988 */
- /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7,
- * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7
- */
- __phy_write(phydev, 0x11, 0xb90a);
- __phy_write(phydev, 0x12, 0x6f);
- __phy_write(phydev, 0x10, 0x8f82);
-
- /* RemAckCntLimitCtrl = 1 */
- __phy_write(phydev, 0x11, 0xfbba);
- __phy_write(phydev, 0x12, 0xc3);
- __phy_write(phydev, 0x10, 0x87f8);
-
+ __tr_modify(phydev, 0x1, 0xf, 0x1,
+ MRVL_TR_FIX_100KP_MASK | MRVL_TR_FIX_100KF_MASK |
+ MRVL_TR_FIX_1000KP_MASK | MRVL_TR_FIX_1000KF_MASK,
+ FIELD_PREP(MRVL_TR_FIX_100KP_MASK, 0x6) |
+ FIELD_PREP(MRVL_TR_FIX_100KF_MASK, 0x7) |
+ FIELD_PREP(MRVL_TR_FIX_1000KP_MASK, 0x6) |
+ FIELD_PREP(MRVL_TR_FIX_1000KF_MASK, 0x7));
+
+ __tr_modify(phydev, 0x0, 0xf, 0x3c,
+ REMOTE_ACK_COUNT_LIMIT_CTRL_MASK,
+ FIELD_PREP(REMOTE_ACK_COUNT_LIMIT_CTRL_MASK, 0x1));
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
/* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
@@ -925,45 +959,34 @@ static void mt798x_phy_eee(struct phy_device *phydev)
MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* Regsigdet_sel_1000 = 0 */
- __phy_write(phydev, 0x11, 0xb);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9690);
-
- /* REG_EEE_st2TrKf1000 = 2 */
- __phy_write(phydev, 0x11, 0x114f);
- __phy_write(phydev, 0x12, 0x2);
- __phy_write(phydev, 0x10, 0x969a);
-
- /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
- __phy_write(phydev, 0x11, 0x3028);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x969e);
-
- /* RegEEE_slv_wake_int_timer_tar = 8 */
- __phy_write(phydev, 0x11, 0x5010);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a0);
-
- /* RegEEE_trfreeze_timer2 = 586 */
- __phy_write(phydev, 0x11, 0x24a);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a8);
-
- /* RegEEE100Stg1_tar = 16 */
- __phy_write(phydev, 0x11, 0x3210);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96b8);
-
- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */
- __phy_write(phydev, 0x11, 0x1463);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96ca);
-
- /* DfeTailEnableVgaThresh1000 = 27 */
- __phy_write(phydev, 0x11, 0x36);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8f80);
+ __tr_clr_bits(phydev, 0x2, 0xd, 0x8, EEE1000_SELECT_SIGNEL_DETECTION_FROM_DFE);
+
+ __tr_modify(phydev, 0x2, 0xd, 0xd,
+ EEE1000_STAGE2_TR_KF_MASK,
+ FIELD_PREP(EEE1000_STAGE2_TR_KF_MASK, 0x2));
+
+ __tr_modify(phydev, 0x2, 0xd, 0xf,
+ SLAVE_WAKETR_TIMER_MASK | SLAVE_REMTX_TIMER_MASK,
+ FIELD_PREP(SLAVE_WAKETR_TIMER_MASK, 0x6) |
+ FIELD_PREP(SLAVE_REMTX_TIMER_MASK, 0x14));
+
+ __tr_modify(phydev, 0x2, 0xd, 0x10,
+ SLAVE_WAKEINT_TIMER_MASK,
+ FIELD_PREP(SLAVE_WAKEINT_TIMER_MASK, 0x8));
+
+ __tr_modify(phydev, 0x2, 0xd, 0x14,
+ TR_FREEZE_TIMER2_MASK,
+ FIELD_PREP(TR_FREEZE_TIMER2_MASK, 0x24a));
+
+ __tr_modify(phydev, 0x2, 0xd, 0x1c,
+ EEE100_LPSYNC_STAGE1_UPDATE_TIMER_MASK,
+ FIELD_PREP(EEE100_LPSYNC_STAGE1_UPDATE_TIMER_MASK, 0x10));
+
+ __tr_clr_bits(phydev, 0x2, 0xd, 0x25, WAKE_SLAVE_TR_WAIT_DFE_DETECTION_EN);
+
+ __tr_modify(phydev, 0x1, 0xf, 0x0,
+ DFE_TAIL_EANBLE_VGA_TRHESH_1000,
+ FIELD_PREP(DFE_TAIL_EANBLE_VGA_TRHESH_1000, 0x1b));
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
@@ -1121,49 +1144,52 @@ static int mt798x_phy_config_init(struct phy_device *phydev)
return mt798x_phy_calibration(phydev);
}
-static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
- bool on)
+static int mtk_phy_cl22_read_status(struct phy_device *phydev)
{
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- bool changed;
+ int err, old_link = phydev->link;
- if (on)
- changed = !test_and_set_bit(bit_on, &priv->led_state);
- else
- changed = !!test_and_clear_bit(bit_on, &priv->led_state);
-
- changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
- (index ? 16 : 0), &priv->led_state);
- if (changed)
- return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED_ON_MASK,
- on ? MTK_PHY_LED_ON_FORCE_ON : 0);
- else
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ /* why bother the PHY if nothing can have changed */
+ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
return 0;
-}
-static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
- bool blinking)
-{
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- bool changed;
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
- if (blinking)
- changed = !test_and_set_bit(bit_blink, &priv->led_state);
- else
- changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
-
- changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
- (index ? 16 : 0), &priv->led_state);
- if (changed)
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
- blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
- else
- return 0;
+ if (phydev->is_gigabit_capable) {
+ err = genphy_read_master_slave(phydev);
+ if (err < 0)
+ return err;
+ }
+
+ err = genphy_read_lpa(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (phydev->autoneg_complete) {
+ phy_resolve_aneg_linkmode(phydev);
+ } else if (!linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->advertising) &&
+ linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ phydev->advertising)) {
+ extend_an_new_lp_cnt_limit(phydev);
+ }
+ } else if (phydev->autoneg == AUTONEG_DISABLE) {
+ err = genphy_read_status_fixed(phydev);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
}
static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
@@ -1172,6 +1198,7 @@ static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
{
bool blinking = false;
int err = 0;
+ struct mtk_socphy_priv *priv = phydev->priv;
if (index > 1)
return -EINVAL;
@@ -1182,23 +1209,24 @@ static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
*delay_off = 50;
}
- err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, blinking);
if (err)
return err;
- return mt798x_phy_hw_led_on_set(phydev, index, false);
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state, false);
}
static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
u8 index, enum led_brightness value)
{
int err;
+ struct mtk_socphy_priv *priv = phydev->priv;
- err = mt798x_phy_hw_led_blink_set(phydev, index, false);
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, false);
if (err)
return err;
- return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state, (value != LED_OFF));
}
static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
@@ -1210,151 +1238,29 @@ static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX)
BIT(TRIGGER_NETDEV_RX) |
BIT(TRIGGER_NETDEV_TX));
-static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
- unsigned long rules)
+static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index, unsigned long rules)
{
- if (index > 1)
- return -EINVAL;
-
- /* All combinations of the supported triggers are allowed */
- if (rules & ~supported_triggers)
- return -EOPNOTSUPP;
-
- return 0;
-};
+ return mtk_phy_led_hw_is_supported(phydev, index, rules, supported_triggers);
+}
static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
unsigned long *rules)
{
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
struct mtk_socphy_priv *priv = phydev->priv;
- int on, blink;
-
- if (index > 1)
- return -EINVAL;
-
- on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
- index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
-
- if (on < 0)
- return -EIO;
-
- blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
- index ? MTK_PHY_LED1_BLINK_CTRL :
- MTK_PHY_LED0_BLINK_CTRL);
- if (blink < 0)
- return -EIO;
-
- if ((on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 |
- MTK_PHY_LED_ON_LINK10)) ||
- (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX |
- MTK_PHY_LED_BLINK_10RX | MTK_PHY_LED_BLINK_1000TX |
- MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX)))
- set_bit(bit_netdev, &priv->led_state);
- else
- clear_bit(bit_netdev, &priv->led_state);
-
- if (on & MTK_PHY_LED_ON_FORCE_ON)
- set_bit(bit_on, &priv->led_state);
- else
- clear_bit(bit_on, &priv->led_state);
-
- if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
- set_bit(bit_blink, &priv->led_state);
- else
- clear_bit(bit_blink, &priv->led_state);
-
- if (!rules)
- return 0;
- if (on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK10))
- *rules |= BIT(TRIGGER_NETDEV_LINK);
-
- if (on & MTK_PHY_LED_ON_LINK10)
- *rules |= BIT(TRIGGER_NETDEV_LINK_10);
-
- if (on & MTK_PHY_LED_ON_LINK100)
- *rules |= BIT(TRIGGER_NETDEV_LINK_100);
-
- if (on & MTK_PHY_LED_ON_LINK1000)
- *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
-
- if (on & MTK_PHY_LED_ON_FDX)
- *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
-
- if (on & MTK_PHY_LED_ON_HDX)
- *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
-
- if (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | MTK_PHY_LED_BLINK_10RX))
- *rules |= BIT(TRIGGER_NETDEV_RX);
-
- if (blink & (MTK_PHY_LED_BLINK_1000TX | MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX))
- *rules |= BIT(TRIGGER_NETDEV_TX);
-
- return 0;
+ return mtk_phy_led_hw_ctrl_get(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET, MTK_GPHY_LED_TX_BLINK_SET);
};
static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
unsigned long rules)
{
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
struct mtk_socphy_priv *priv = phydev->priv;
- u16 on = 0, blink = 0;
- int ret;
-
- if (index > 1)
- return -EINVAL;
-
- if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
- on |= MTK_PHY_LED_ON_FDX;
-
- if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
- on |= MTK_PHY_LED_ON_HDX;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK10;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK100;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK1000;
-
- if (rules & BIT(TRIGGER_NETDEV_RX)) {
- blink |= MTK_PHY_LED_BLINK_10RX |
- MTK_PHY_LED_BLINK_100RX |
- MTK_PHY_LED_BLINK_1000RX;
- }
-
- if (rules & BIT(TRIGGER_NETDEV_TX)) {
- blink |= MTK_PHY_LED_BLINK_10TX |
- MTK_PHY_LED_BLINK_100TX |
- MTK_PHY_LED_BLINK_1000TX;
- }
-
- if (blink || on)
- set_bit(bit_netdev, &priv->led_state);
- else
- clear_bit(bit_netdev, &priv->led_state);
-
- ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_ON_CTRL :
- MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED_ON_FDX |
- MTK_PHY_LED_ON_HDX |
- MTK_PHY_LED_ON_LINK10 |
- MTK_PHY_LED_ON_LINK100 |
- MTK_PHY_LED_ON_LINK1000,
- on);
-
- if (ret)
- return ret;
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_BLINK_CTRL :
- MTK_PHY_LED0_BLINK_CTRL, blink);
+ return mtk_phy_led_hw_ctrl_set(phydev, index, rules, &priv->led_state,
+ MTK_GPHY_LED_ON_SET,
+ MTK_GPHY_LED_RX_BLINK_SET, MTK_GPHY_LED_TX_BLINK_SET);
};
static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
@@ -1498,6 +1404,7 @@ static struct phy_driver mtk_socphy_driver[] = {
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
.name = "MediaTek MT7981 PHY",
.config_init = mt798x_phy_config_init,
+ .read_status = mtk_phy_cl22_read_status,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.probe = mt7981_phy_probe,
@@ -1515,6 +1422,7 @@ static struct phy_driver mtk_socphy_driver[] = {
PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
.name = "MediaTek MT7988 PHY",
.config_init = mt798x_phy_config_init,
+ .read_status = mtk_phy_cl22_read_status,
.config_intr = genphy_no_config_intr,
.handle_interrupt = genphy_handle_interrupt_no_ack,
.probe = mt7988_phy_probe,
diff --git a/drivers/net/phy/mediatek/mtk-ge.c b/drivers/net/phy/mediatek/mtk-ge.c
index 54ea64a37ab3..20b04cb806ad 100644
--- a/drivers/net/phy/mediatek/mtk-ge.c
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -3,41 +3,62 @@
#include <linux/module.h>
#include <linux/phy.h>
-#define MTK_EXT_PAGE_ACCESS 0x1f
-#define MTK_PHY_PAGE_STANDARD 0x0000
-#define MTK_PHY_PAGE_EXTENDED 0x0001
-#define MTK_PHY_PAGE_EXTENDED_2 0x0002
-#define MTK_PHY_PAGE_EXTENDED_3 0x0003
-#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
-
-static int mtk_gephy_read_page(struct phy_device *phydev)
-{
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-}
+#include "mtk.h"
-static int mtk_gephy_write_page(struct phy_device *phydev, int page)
-{
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-}
+#define MTK_PHY_PAGE_EXTENDED_1 0x0001
+#define MTK_PHY_AUX_CTRL_AND_STATUS 0x14
+#define MTK_PHY_ENABLE_DOWNSHIFT BIT(4)
+
+#define MTK_PHY_PAGE_EXTENDED_2 0x0002
+#define MTK_PHY_PAGE_EXTENDED_3 0x0003
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG11 0x11
+
+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
+
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x17 */
+#define SLAVE_DSP_READY_TIME_MASK GENMASK(22, 15)
+
+/* Registers on MDIO_MMD_VEND1 */
+#define MTK_PHY_GBE_MODE_TX_DELAY_SEL 0x13
+#define MTK_PHY_TEST_MODE_TX_DELAY_SEL 0x14
+#define MTK_TX_DELAY_PAIR_B_MASK GENMASK(10, 8)
+#define MTK_TX_DELAY_PAIR_D_MASK GENMASK(2, 0)
+
+#define MTK_PHY_MCC_CTRL_AND_TX_POWER_CTRL 0xa6
+#define MTK_MCC_NEARECHO_OFFSET_MASK GENMASK(15, 8)
+
+#define MTK_PHY_RXADC_CTRL_RG7 0xc6
+#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
+
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG123 0x123
+#define MTK_PHY_LPI_NORM_MSE_LO_THRESH100_MASK GENMASK(15, 8)
+#define MTK_PHY_LPI_NORM_MSE_HI_THRESH100_MASK GENMASK(7, 0)
static void mtk_gephy_config_init(struct phy_device *phydev)
{
/* Enable HW auto downshift */
- phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
+ phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED_1, MTK_PHY_AUX_CTRL_AND_STATUS,
+ 0, MTK_PHY_ENABLE_DOWNSHIFT);
/* Increase SlvDPSready time */
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- __phy_write(phydev, 0x10, 0xafae);
- __phy_write(phydev, 0x12, 0x2f);
- __phy_write(phydev, 0x10, 0x8fae);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+ tr_modify(phydev, 0x1, 0xf, 0x17, SLAVE_DSP_READY_TIME_MASK,
+ FIELD_PREP(SLAVE_DSP_READY_TIME_MASK, 0x5e));
/* Adjust 100_mse_threshold */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
-
- /* Disable mcc */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG123,
+ MTK_PHY_LPI_NORM_MSE_LO_THRESH100_MASK |
+ MTK_PHY_LPI_NORM_MSE_HI_THRESH100_MASK,
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_LO_THRESH100_MASK,
+ 0xff) |
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH100_MASK,
+ 0xff));
+
+ /* If echo time is narrower than 0x3, it will be regarded as noise */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_MCC_CTRL_AND_TX_POWER_CTRL,
+ MTK_MCC_NEARECHO_OFFSET_MASK,
+ FIELD_PREP(MTK_MCC_NEARECHO_OFFSET_MASK, 0x3));
}
static int mt7530_phy_config_init(struct phy_device *phydev)
@@ -45,7 +66,8 @@ static int mt7530_phy_config_init(struct phy_device *phydev)
mtk_gephy_config_init(phydev);
/* Increase post_update_timer */
- phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
+ phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3,
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG11, 0x4b);
return 0;
}
@@ -56,11 +78,67 @@ static int mt7531_phy_config_init(struct phy_device *phydev)
/* PHY link down power saving enable */
phy_set_bits(phydev, 0x17, BIT(4));
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK,
+ FIELD_PREP(MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3));
/* Set TX Pair delay selection */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_GBE_MODE_TX_DELAY_SEL,
+ MTK_TX_DELAY_PAIR_B_MASK | MTK_TX_DELAY_PAIR_D_MASK,
+ FIELD_PREP(MTK_TX_DELAY_PAIR_B_MASK, 0x4) |
+ FIELD_PREP(MTK_TX_DELAY_PAIR_D_MASK, 0x4));
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TEST_MODE_TX_DELAY_SEL,
+ MTK_TX_DELAY_PAIR_B_MASK | MTK_TX_DELAY_PAIR_D_MASK,
+ FIELD_PREP(MTK_TX_DELAY_PAIR_B_MASK, 0x4) |
+ FIELD_PREP(MTK_TX_DELAY_PAIR_D_MASK, 0x4));
+
+ return 0;
+}
+
+static int mtk_phy_cl22_read_status(struct phy_device *phydev)
+{
+ int err, old_link = phydev->link;
+
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ /* why bother the PHY if nothing can have changed */
+ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+ return 0;
+
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (phydev->is_gigabit_capable) {
+ err = genphy_read_master_slave(phydev);
+ if (err < 0)
+ return err;
+ }
+
+ err = genphy_read_lpa(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (phydev->autoneg_complete) {
+ phy_resolve_aneg_linkmode(phydev);
+ } else if (!linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->advertising) &&
+ linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ phydev->advertising)) {
+ extend_an_new_lp_cnt_limit(phydev);
+ }
+ } else if (phydev->autoneg == AUTONEG_DISABLE) {
+ err = genphy_read_status_fixed(phydev);
+ if (err < 0)
+ return err;
+ }
return 0;
}
@@ -70,6 +148,7 @@ static struct phy_driver mtk_gephy_driver[] = {
PHY_ID_MATCH_EXACT(0x03a29412),
.name = "MediaTek MT7530 PHY",
.config_init = mt7530_phy_config_init,
+ .read_status = mtk_phy_cl22_read_status,
/* Interrupts are handled by the switch, not the PHY
* itself.
*/
@@ -77,13 +156,14 @@ static struct phy_driver mtk_gephy_driver[] = {
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
- .read_page = mtk_gephy_read_page,
- .write_page = mtk_gephy_write_page,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
},
{
PHY_ID_MATCH_EXACT(0x03a29441),
.name = "MediaTek MT7531 PHY",
.config_init = mt7531_phy_config_init,
+ .read_status = mtk_phy_cl22_read_status,
/* Interrupts are handled by the switch, not the PHY
* itself.
*/
@@ -91,8 +171,8 @@ static struct phy_driver mtk_gephy_driver[] = {
.handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
- .read_page = mtk_gephy_read_page,
- .write_page = mtk_gephy_write_page,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
},
};
diff --git a/drivers/net/phy/mediatek/mtk-phy-lib.c b/drivers/net/phy/mediatek/mtk-phy-lib.c
new file mode 100644
index 000000000000..d3052b4464d3
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include <linux/netdevice.h>
+
+#include "mtk.h"
+
+static void tr_access(struct phy_device *phydev, bool read, u8 ch_addr, u8 node_addr, u8 data_addr)
+{
+ u16 tr_cmd = BIT(15); /* bit 14 & 0 are reserved */
+
+ if (read)
+ tr_cmd |= BIT(13);
+
+ tr_cmd |= (((ch_addr & 0x3) << 11) |
+ ((node_addr & 0xf) << 7) |
+ ((data_addr & 0x3f) << 1));
+ dev_dbg(&phydev->mdio.dev, "tr_cmd: 0x%x\n", tr_cmd);
+ __phy_write(phydev, 0x10, tr_cmd);
+}
+
+static void __tr_read(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
+ u16 *tr_high, u16 *tr_low)
+{
+ tr_access(phydev, true, ch_addr, node_addr, data_addr);
+ *tr_low = __phy_read(phydev, 0x11);
+ *tr_high = __phy_read(phydev, 0x12);
+ dev_dbg(&phydev->mdio.dev, "tr_high read: 0x%x, tr_low read: 0x%x\n",
+ *tr_high, *tr_low);
+}
+
+static void tr_read(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
+ u16 *tr_high, u16 *tr_low)
+{
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ __tr_read(phydev, ch_addr, node_addr, data_addr, tr_high, tr_low);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+}
+
+static void __tr_write(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
+ u32 tr_data)
+{
+ __phy_write(phydev, 0x11, tr_data & 0xffff);
+ __phy_write(phydev, 0x12, tr_data >> 16);
+ dev_dbg(&phydev->mdio.dev, "tr_high write: 0x%x, tr_low write: 0x%x\n",
+ tr_data >> 16, tr_data & 0xffff);
+ tr_access(phydev, false, ch_addr, node_addr, data_addr);
+}
+
+static void tr_write(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr, u32 tr_data)
+{
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ __tr_write(phydev, ch_addr, node_addr, data_addr, tr_data);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+}
+
+void __tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
+ u32 mask, u32 set)
+{
+ u32 tr_data;
+ u16 tr_high;
+ u16 tr_low;
+
+ __tr_read(phydev, ch_addr, node_addr, data_addr, &tr_high, &tr_low);
+ tr_data = (tr_high << 16) | tr_low;
+ tr_data = (tr_data & ~mask) | set;
+ __tr_write(phydev, ch_addr, node_addr, data_addr, tr_data);
+}
+EXPORT_SYMBOL_GPL(__tr_modify);
+
+void tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
+ u32 mask, u32 set)
+{
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ __tr_modify(phydev, ch_addr, node_addr, data_addr, mask, set);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+}
+EXPORT_SYMBOL_GPL(tr_modify);
+
+void __tr_set_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr, u32 set)
+{
+ __tr_modify(phydev, ch_addr, node_addr, data_addr, 0, set);
+}
+EXPORT_SYMBOL_GPL(__tr_set_bits);
+
+void __tr_clr_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr, u32 clr)
+{
+ __tr_modify(phydev, ch_addr, node_addr, data_addr, clr, 0);
+}
+EXPORT_SYMBOL_GPL(__tr_clr_bits);
+
+int mtk_phy_read_page(struct phy_device *phydev)
+{
+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+}
+EXPORT_SYMBOL_GPL(mtk_phy_read_page);
+
+int mtk_phy_write_page(struct phy_device *phydev, int page)
+{
+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
+}
+EXPORT_SYMBOL_GPL(mtk_phy_write_page);
+
+void extend_an_new_lp_cnt_limit(struct phy_device *phydev)
+{
+ int mmd_read_ret;
+ int ret;
+ u32 reg_val;
+
+ ret = read_poll_timeout(mmd_read_ret = phy_read_mmd, reg_val,
+ (mmd_read_ret < 0) || reg_val & MTK_PHY_FINAL_SPEED_1000,
+ 10000, 1000000, false, phydev,
+ MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
+ if (mmd_read_ret < 0)
+ ret = mmd_read_ret;
+ /* If final_speed_1000 is raised, try to extend timeout period
+ * of auto downshift.
+ */
+ if (!ret) {
+ tr_modify(phydev, 0x0, 0xf, 0x3c, AN_NEW_LP_CNT_LIMIT_MASK,
+ FIELD_PREP(AN_NEW_LP_CNT_LIMIT_MASK, 0xf));
+ msleep(2800);
+ tr_modify(phydev, 0x0, 0xf, 0x3c, AN_NEW_LP_CNT_LIMIT_MASK,
+ FIELD_PREP(AN_NEW_LP_CNT_LIMIT_MASK, 0x8));
+ }
+}
+EXPORT_SYMBOL_GPL(extend_an_new_lp_cnt_limit);
+
+int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index, unsigned long rules,
+ unsigned long supported_triggers)
+{
+ if (index > 1)
+ return -EINVAL;
+
+ /* All combinations of the supported triggers are allowed */
+ if (rules & ~supported_triggers)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_led_hw_is_supported);
+
+int mtk_phy_led_hw_ctrl_get(struct phy_device *phydev, u8 index, unsigned long *rules,
+ unsigned long *led_state, u16 on_set,
+ u16 rx_blink_set, u16 tx_blink_set)
+{
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
+ int on, blink;
+
+ if (index > 1)
+ return -EINVAL;
+
+ on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
+
+ if (on < 0)
+ return -EIO;
+
+ blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ index ? MTK_PHY_LED1_BLINK_CTRL :
+ MTK_PHY_LED0_BLINK_CTRL);
+ if (blink < 0)
+ return -EIO;
+
+ if ((on & (on_set | MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX | MTK_PHY_LED_ON_LINKDOWN)) ||
+ (blink & (rx_blink_set | tx_blink_set)))
+ set_bit(bit_netdev, led_state);
+ else
+ clear_bit(bit_netdev, led_state);
+
+ if (on & MTK_PHY_LED_ON_FORCE_ON)
+ set_bit(bit_on, led_state);
+ else
+ clear_bit(bit_on, led_state);
+
+ if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
+ set_bit(bit_blink, led_state);
+ else
+ clear_bit(bit_blink, led_state);
+
+ if (!rules)
+ return 0;
+
+ if (on & on_set)
+ *rules |= BIT(TRIGGER_NETDEV_LINK);
+
+ if (on & MTK_PHY_LED_ON_LINK10)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_10);
+
+ if (on & MTK_PHY_LED_ON_LINK100)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_100);
+
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
+
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_2500);
+
+ if (on & MTK_PHY_LED_ON_FDX)
+ *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
+
+ if (on & MTK_PHY_LED_ON_HDX)
+ *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
+
+ if (blink & rx_blink_set)
+ *rules |= BIT(TRIGGER_NETDEV_RX);
+
+ if (blink & tx_blink_set)
+ *rules |= BIT(TRIGGER_NETDEV_TX);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_led_hw_ctrl_get);
+
+int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index, unsigned long rules,
+ unsigned long *led_state, u16 on_set,
+ u16 rx_blink_set, u16 tx_blink_set)
+{
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
+ u16 on = 0, blink = 0;
+ int ret;
+
+ if (index > 1)
+ return -EINVAL;
+
+ if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
+ on |= MTK_PHY_LED_ON_FDX;
+
+ if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
+ on |= MTK_PHY_LED_ON_HDX;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK10;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK100;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK1000;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_2500) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK2500;
+
+ if (rules & BIT(TRIGGER_NETDEV_RX)) {
+ blink |= (on & on_set) ?
+ (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK2500) ? MTK_PHY_LED_BLINK_2500RX : 0)) :
+ rx_blink_set;
+ }
+
+ if (rules & BIT(TRIGGER_NETDEV_TX)) {
+ blink |= (on & on_set) ?
+ (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK2500) ? MTK_PHY_LED_BLINK_2500TX : 0)) :
+ tx_blink_set;
+ }
+
+ if (blink || on)
+ set_bit(bit_netdev, led_state);
+ else
+ clear_bit(bit_netdev, led_state);
+
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX | on_set, on);
+
+ if (ret)
+ return ret;
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_BLINK_CTRL :
+ MTK_PHY_LED0_BLINK_CTRL, blink);
+}
+EXPORT_SYMBOL_GPL(mtk_phy_led_hw_ctrl_set);
+
+int mtk_phy_hw_led_on_set(struct phy_device *phydev, u8 index, unsigned long *led_state, bool on)
+{
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
+ bool changed;
+
+ if (on)
+ changed = !test_and_set_bit(bit_on, led_state);
+ else
+ changed = !!test_and_clear_bit(bit_on, led_state);
+
+ changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
+ (index ? 16 : 0), led_state);
+ if (changed)
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_MASK,
+ on ? MTK_PHY_LED_ON_FORCE_ON : 0);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_hw_led_on_set);
+
+int mtk_phy_hw_led_blink_set(struct phy_device *phydev, u8 index, unsigned long *led_state,
+ bool blinking)
+{
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
+ bool changed;
+
+ if (blinking)
+ changed = !test_and_set_bit(bit_blink, led_state);
+ else
+ changed = !!test_and_clear_bit(bit_blink, led_state);
+
+ changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
+ (index ? 16 : 0), led_state);
+ if (changed)
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
+ blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mtk_phy_hw_led_blink_set);
+
+MODULE_DESCRIPTION("MediaTek Ethernet PHY driver common");
+MODULE_AUTHOR("Sky Huang <SkyLake.Huang@mediatek.com>");
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/mediatek/mtk.h b/drivers/net/phy/mediatek/mtk.h
new file mode 100644
index 000000000000..47e12913f644
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Common definition for Mediatek Ethernet PHYs
+ * Author: SkyLake Huang <SkyLake.Huang@mediatek.com>
+ * Copyright (c) 2024 MediaTek Inc.
+ */
+
+#ifndef _MTK_EPHY_H_
+#define _MTK_EPHY_H_
+
+#define MTK_EXT_PAGE_ACCESS 0x1f
+#define MTK_PHY_PAGE_STANDARD 0x0000
+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x3c */
+#define AN_NEW_LP_CNT_LIMIT_MASK GENMASK(23, 20)
+
+#define MTK_PHY_LINK_STATUS_MISC (0xa2)
+#define MTK_PHY_FINAL_SPEED_1000 BIT(3)
+
+/* Registers on MDIO_MMD_VEND2 */
+#define MTK_PHY_LED0_ON_CTRL 0x24
+#define MTK_PHY_LED1_ON_CTRL 0x26
+#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
+#define MTK_PHY_LED_ON_LINK1000 BIT(0)
+#define MTK_PHY_LED_ON_LINK100 BIT(1)
+#define MTK_PHY_LED_ON_LINK10 BIT(2)
+#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
+#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
+#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
+#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
+#define MTK_PHY_LED_ON_LINK2500 BIT(7)
+#define MTK_PHY_LED_ON_POLARITY BIT(14)
+#define MTK_PHY_LED_ON_ENABLE BIT(15)
+
+#define MTK_PHY_LED0_BLINK_CTRL 0x25
+#define MTK_PHY_LED1_BLINK_CTRL 0x27
+#define MTK_PHY_LED_BLINK_1000TX BIT(0)
+#define MTK_PHY_LED_BLINK_1000RX BIT(1)
+#define MTK_PHY_LED_BLINK_100TX BIT(2)
+#define MTK_PHY_LED_BLINK_100RX BIT(3)
+#define MTK_PHY_LED_BLINK_10TX BIT(4)
+#define MTK_PHY_LED_BLINK_10RX BIT(5)
+#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
+#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
+#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
+#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
+#define MTK_PHY_LED_BLINK_2500TX BIT(10)
+#define MTK_PHY_LED_BLINK_2500RX BIT(11)
+
+#define MTK_GPHY_LED_ON_SET (MTK_PHY_LED_ON_LINK1000 | \
+ MTK_PHY_LED_ON_LINK100 | \
+ MTK_PHY_LED_ON_LINK10)
+#define MTK_GPHY_LED_RX_BLINK_SET (MTK_PHY_LED_BLINK_1000RX | \
+ MTK_PHY_LED_BLINK_100RX | \
+ MTK_PHY_LED_BLINK_10RX)
+#define MTK_GPHY_LED_TX_BLINK_SET (MTK_PHY_LED_BLINK_1000RX | \
+ MTK_PHY_LED_BLINK_100RX | \
+ MTK_PHY_LED_BLINK_10RX)
+
+#define MTK_2P5GPHY_LED_ON_SET (MTK_PHY_LED_ON_LINK2500 | \
+ MTK_GPHY_LED_ON_SET)
+#define MTK_2P5GPHY_LED_RX_BLINK_SET (MTK_PHY_LED_BLINK_2500RX | \
+ MTK_GPHY_LED_RX_BLINK_SET)
+#define MTK_2P5GPHY_LED_TX_BLINK_SET (MTK_PHY_LED_BLINK_2500RX | \
+ MTK_GPHY_LED_TX_BLINK_SET)
+
+#define MTK_PHY_LED_STATE_FORCE_ON 0
+#define MTK_PHY_LED_STATE_FORCE_BLINK 1
+#define MTK_PHY_LED_STATE_NETDEV 2
+
+void tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
+ u32 mask, u32 set);
+void __tr_modify(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
+ u32 mask, u32 set);
+void __tr_set_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr, u32 set);
+void __tr_clr_bits(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr, u32 clr);
+
+int mtk_phy_read_page(struct phy_device *phydev);
+int mtk_phy_write_page(struct phy_device *phydev, int page);
+
+void extend_an_new_lp_cnt_limit(struct phy_device *phydev);
+
+int mtk_phy_led_hw_is_supported(struct phy_device *phydev, u8 index, unsigned long rules,
+ unsigned long supported_triggers);
+int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index, unsigned long rules,
+ unsigned long *led_state, u16 on_set,
+ u16 rx_blink_set, u16 tx_blink_set);
+int mtk_phy_led_hw_ctrl_get(struct phy_device *phydev, u8 index, unsigned long *rules,
+ unsigned long *led_state, u16 on_set,
+ u16 rx_blink_set, u16 tx_blink_set);
+int mtk_phy_hw_led_on_set(struct phy_device *phydev, u8 index, unsigned long *led_state, bool on);
+int mtk_phy_hw_led_blink_set(struct phy_device *phydev, u8 index, unsigned long *led_state,
+ bool blinking);
+
+#endif /* _MTK_EPHY_H_ */
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988
2024-04-25 2:33 [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Sky Huang
2024-04-25 2:33 ` [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers Sky Huang
2024-04-25 2:33 ` [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations Sky Huang
@ 2024-04-25 2:33 ` Sky Huang
2024-04-25 9:01 ` Russell King (Oracle)
2024-04-25 15:37 ` Andrew Lunn
2024-04-25 3:05 ` [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Daniel Golle
3 siblings, 2 replies; 11+ messages in thread
From: Sky Huang @ 2024-04-25 2:33 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Daniel Golle,
Qingfang Deng, SkyLake Huang, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, netdev,
linux-arm-kernel, linux-mediatek
Cc: Steven Liu, SkyLake.Huang
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Add support for internal 2.5Gphy on MT7988. This driver will load
necessary firmware, add appropriate time delay and figure out LED.
Also, certain control registers will be set to fix link-up issues.
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
MAINTAINERS | 1 +
drivers/net/phy/mediatek/Kconfig | 11 +
drivers/net/phy/mediatek/Makefile | 1 +
drivers/net/phy/mediatek/mtk-2p5ge.c | 399 +++++++++++++++++++++++++++
4 files changed, 412 insertions(+)
create mode 100644 drivers/net/phy/mediatek/mtk-2p5ge.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 1dbecd14572e..1232af36ee68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13908,6 +13908,7 @@ M: Qingfang Deng <dqfext@gmail.com>
M: SkyLake Huang <SkyLake.Huang@mediatek.com>
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/phy/mediatek/mtk-2p5ge.c
F: drivers/net/phy/mediatek/mtk-ge-soc.c
F: drivers/net/phy/mediatek/mtk-phy-lib.c
F: drivers/net/phy/mediatek/mtk-ge.c
diff --git a/drivers/net/phy/mediatek/Kconfig b/drivers/net/phy/mediatek/Kconfig
index c2aabed185a2..bd643a91e911 100644
--- a/drivers/net/phy/mediatek/Kconfig
+++ b/drivers/net/phy/mediatek/Kconfig
@@ -20,3 +20,14 @@ config MEDIATEK_GE_SOC_PHY
the MT7981 and MT7988 SoCs. These PHYs need calibration data
present in the SoCs efuse and will dynamically calibrate VCM
(common-mode voltage) during startup.
+
+config MEDIATEK_2P5GE_PHY
+ tristate "MediaTek 2.5Gb Ethernet PHYs"
+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
+ select MTK_NET_PHYLIB
+ help
+ Supports MediaTek SoC built-in 2.5Gb Ethernet PHYs.
+
+ This will load necessary firmware and add appropriate time delay.
+ Accelerate this procedure through internal pbus instead of MDIO
+ bus. Certain link-up issues will also be fixed here.
diff --git a/drivers/net/phy/mediatek/Makefile b/drivers/net/phy/mediatek/Makefile
index 814879d0abe5..c6db8abd2c9c 100644
--- a/drivers/net/phy/mediatek/Makefile
+++ b/drivers/net/phy/mediatek/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_MTK_NET_PHYLIB) += mtk-phy-lib.o
obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
+obj-$(CONFIG_MEDIATEK_2P5GE_PHY) += mtk-2p5ge.o
diff --git a/drivers/net/phy/mediatek/mtk-2p5ge.c b/drivers/net/phy/mediatek/mtk-2p5ge.c
new file mode 100644
index 000000000000..3826d0a1241c
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk-2p5ge.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/bitfield.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/phy.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#include "mtk.h"
+
+#define MT7988_2P5GE_PMB "mediatek/mt7988/i2p5ge-phy-pmb.bin"
+
+#define MD32_EN BIT(0)
+#define PMEM_PRIORITY BIT(8)
+#define DMEM_PRIORITY BIT(16)
+
+#define BASE100T_STATUS_EXTEND (0x10)
+#define BASE1000T_STATUS_EXTEND (0x11)
+#define EXTEND_CTRL_AND_STATUS (0x16)
+
+#define PHY_AUX_CTRL_STATUS (0x1d)
+#define PHY_AUX_DPX_MASK GENMASK(5, 5)
+#define PHY_AUX_SPEED_MASK GENMASK(4, 2)
+
+/* MTK_PHY_LINK_STATUS_MISC's fields */
+#define MTK_PHY_FDX_ENABLE BIT(5)
+
+#define MTK_PHY_LPI_PCS_DSP_CTRL (0x121)
+#define MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK GENMASK(12, 8)
+
+/* Registers on MTK phy page 1*/
+#define MTK_PHY_PAGE_EXTENDED_1 0x0001
+#define MTK_PHY_AUX_CTRL_AND_STATUS (0x14)
+#define MTK_PHY_ENABLE_DOWNSHIFT BIT(4)
+
+/* Registers on Token Ring debug nodes */
+/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x3c */
+#define AUTO_NP_10XEN BIT(6)
+
+struct mtk_i2p5ge_phy_priv {
+ bool fw_loaded;
+ unsigned long led_state;
+};
+
+enum {
+ PHY_AUX_SPD_10 = 0,
+ PHY_AUX_SPD_100,
+ PHY_AUX_SPD_1000,
+ PHY_AUX_SPD_2500,
+};
+
+static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev)
+{
+ int ret, i;
+ const struct firmware *fw;
+ struct device *dev = &phydev->mdio.dev;
+ struct device_node *np;
+ void __iomem *pmb_addr;
+ void __iomem *md32_en_cfg_base;
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+ u16 reg;
+ struct pinctrl *pinctrl;
+
+ if (!priv->fw_loaded) {
+ np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw");
+ if (!np)
+ return -ENOENT;
+ pmb_addr = of_iomap(np, 0);
+ if (!pmb_addr)
+ return -ENOMEM;
+ md32_en_cfg_base = of_iomap(np, 1);
+ if (!md32_en_cfg_base)
+ return -ENOMEM;
+
+ ret = request_firmware(&fw, MT7988_2P5GE_PMB, dev);
+ if (ret) {
+ dev_err(dev, "failed to load firmware: %s, ret: %d\n",
+ MT7988_2P5GE_PMB, ret);
+ return ret;
+ }
+
+ reg = readw(md32_en_cfg_base);
+ if (reg & MD32_EN) {
+ phy_set_bits(phydev, 0, BIT(15));
+ usleep_range(10000, 11000);
+ }
+ phy_set_bits(phydev, 0, BIT(11));
+
+ /* Write magic number to safely stall MCU */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800e, 0x1100);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800f, 0x00df);
+
+ for (i = 0; i < fw->size - 1; i += 4)
+ writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
+ release_firmware(fw);
+
+ writew(reg & ~MD32_EN, md32_en_cfg_base);
+ writew(reg | MD32_EN, md32_en_cfg_base);
+ phy_set_bits(phydev, 0, BIT(15));
+ /* We need a delay here to stabilize initialization of MCU */
+ usleep_range(7000, 8000);
+ dev_info(dev, "Firmware loading/trigger ok.\n");
+
+ priv->fw_loaded = true;
+ }
+
+ /* Setup LED */
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_POLARITY | MTK_PHY_LED_ON_LINK10 |
+ MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK1000 |
+ MTK_PHY_LED_ON_LINK2500);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
+ MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX);
+
+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led");
+ if (IS_ERR(pinctrl)) {
+ dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n");
+ return PTR_ERR(pinctrl);
+ }
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LPI_PCS_DSP_CTRL,
+ MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK, 0);
+
+ /* Enable 16-bit next page exchange bit if 1000-BT isn't advertizing */
+ tr_modify(phydev, 0x0, 0xf, 0x3c, AUTO_NP_10XEN,
+ FIELD_PREP(AUTO_NP_10XEN, 0x1));
+
+ /* Enable HW auto downshift */
+ phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED_1, MTK_PHY_AUX_CTRL_AND_STATUS,
+ 0, MTK_PHY_ENABLE_DOWNSHIFT);
+
+ return 0;
+}
+
+static int mt7988_2p5ge_phy_config_aneg(struct phy_device *phydev)
+{
+ bool changed = false;
+ u32 adv;
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_DISABLE) {
+ /* Configure half duplex with genphy_setup_forced,
+ * because genphy_c45_pma_setup_forced does not support.
+ */
+ return phydev->duplex != DUPLEX_FULL
+ ? genphy_setup_forced(phydev)
+ : genphy_c45_pma_setup_forced(phydev);
+ }
+
+ ret = genphy_c45_an_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
+ ret = phy_modify_changed(phydev, MII_CTRL1000,
+ ADVERTISE_1000FULL | ADVERTISE_1000HALF,
+ adv);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int mt7988_2p5ge_phy_get_features(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_read_abilities(phydev);
+ if (ret)
+ return ret;
+
+ /* We don't support HDX at MAC layer on mt7988.
+ * So mask phy's HDX capabilities, too.
+ */
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+ return 0;
+}
+
+static int mt7988_2p5ge_phy_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_update_link(phydev);
+ if (ret)
+ return ret;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ if (phydev->autoneg_complete) {
+ ret = genphy_c45_read_lpa(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Read the link partner's 1G advertisement */
+ ret = phy_read(phydev, MII_STAT1000);
+ if (ret < 0)
+ return ret;
+ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
+ } else if (!linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+ phydev->advertising) &&
+ linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ phydev->advertising)) {
+ extend_an_new_lp_cnt_limit(phydev);
+ }
+ } else if (phydev->autoneg == AUTONEG_DISABLE) {
+ linkmode_zero(phydev->lp_advertising);
+ }
+
+ ret = phy_read(phydev, PHY_AUX_CTRL_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) {
+ case PHY_AUX_SPD_10:
+ phydev->speed = SPEED_10;
+ break;
+ case PHY_AUX_SPD_100:
+ phydev->speed = SPEED_100;
+ break;
+ case PHY_AUX_SPD_1000:
+ phydev->speed = SPEED_1000;
+ break;
+ case PHY_AUX_SPD_2500:
+ phydev->speed = SPEED_2500;
+ break;
+ }
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
+ if (ret < 0)
+ return ret;
+ phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF;
+ /* FIXME: The current firmware always enables rate adaptation mode. */
+ phydev->rate_matching = RATE_MATCH_PAUSE;
+
+ return 0;
+}
+
+static int mt7988_2p5ge_phy_get_rate_matching(struct phy_device *phydev,
+ phy_interface_t iface)
+{
+ if (iface == PHY_INTERFACE_MODE_XGMII)
+ return RATE_MATCH_PAUSE;
+ return RATE_MATCH_NONE;
+}
+
+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_LINK_2500) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX));
+
+static int mt798x_2p5ge_phy_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ bool blinking = false;
+ int err = 0;
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+
+ if (index > 1)
+ return -EINVAL;
+
+ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
+ blinking = true;
+ *delay_on = 50;
+ *delay_off = 50;
+ }
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, blinking);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state, false);
+}
+
+static int mt798x_2p5ge_phy_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value)
+{
+ int err;
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+
+ err = mtk_phy_hw_led_blink_set(phydev, index, &priv->led_state, false);
+ if (err)
+ return err;
+
+ return mtk_phy_hw_led_on_set(phydev, index, &priv->led_state, (value != LED_OFF));
+}
+
+static int mt798x_2p5ge_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ return mtk_phy_led_hw_is_supported(phydev, index, rules, supported_triggers);
+}
+
+static int mt798x_2p5ge_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules)
+{
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_get(phydev, index, rules, &priv->led_state,
+ MTK_2P5GPHY_LED_ON_SET,
+ MTK_2P5GPHY_LED_RX_BLINK_SET,
+ MTK_2P5GPHY_LED_TX_BLINK_SET);
+};
+
+static int mt798x_2p5ge_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
+
+ return mtk_phy_led_hw_ctrl_set(phydev, index, rules, &priv->led_state,
+ MTK_2P5GPHY_LED_ON_SET,
+ MTK_2P5GPHY_LED_RX_BLINK_SET,
+ MTK_2P5GPHY_LED_TX_BLINK_SET);
+};
+
+static void mt798x_phy_leds_state_init(struct phy_device *phydev)
+{
+ int i;
+
+ for (i = 0; i < 2; ++i)
+ mt798x_2p5ge_phy_led_hw_control_get(phydev, i, NULL);
+}
+
+static int mt7988_2p5ge_phy_probe(struct phy_device *phydev)
+{
+ struct mtk_i2p5ge_phy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev,
+ sizeof(struct mtk_i2p5ge_phy_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->fw_loaded = false;
+ phydev->priv = priv;
+
+ mt798x_phy_leds_state_init(phydev);
+
+ return 0;
+}
+
+static struct phy_driver mtk_gephy_driver[] = {
+ {
+ PHY_ID_MATCH_MODEL(0x00339c11),
+ .name = "MediaTek MT798x 2.5GbE PHY",
+ .probe = mt7988_2p5ge_phy_probe,
+ .config_init = mt7988_2p5ge_phy_config_init,
+ .config_aneg = mt7988_2p5ge_phy_config_aneg,
+ .get_features = mt7988_2p5ge_phy_get_features,
+ .read_status = mt7988_2p5ge_phy_read_status,
+ .get_rate_matching = mt7988_2p5ge_phy_get_rate_matching,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_phy_read_page,
+ .write_page = mtk_phy_write_page,
+ .led_blink_set = mt798x_2p5ge_phy_led_blink_set,
+ .led_brightness_set = mt798x_2p5ge_phy_led_brightness_set,
+ .led_hw_is_supported = mt798x_2p5ge_phy_led_hw_is_supported,
+ .led_hw_control_get = mt798x_2p5ge_phy_led_hw_control_get,
+ .led_hw_control_set = mt798x_2p5ge_phy_led_hw_control_set,
+ },
+};
+
+module_phy_driver(mtk_gephy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = {
+ { PHY_ID_MATCH_VENDOR(0x00339c00) },
+ { }
+};
+
+MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver");
+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl);
--
2.18.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support
2024-04-25 2:33 [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Sky Huang
` (2 preceding siblings ...)
2024-04-25 2:33 ` [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988 Sky Huang
@ 2024-04-25 3:05 ` Daniel Golle
3 siblings, 0 replies; 11+ messages in thread
From: Daniel Golle @ 2024-04-25 3:05 UTC (permalink / raw)
To: Sky Huang
Cc: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Qingfang Deng,
Matthias Brugger, AngeloGioacchino Del Regno, linux-kernel,
netdev, linux-arm-kernel, linux-mediatek, Steven Liu
Hi SkyLake,
On Thu, Apr 25, 2024 at 10:33:22AM +0800, Sky Huang wrote:
> From: "SkyLake.Huang" <skylake.huang@mediatek.com>
>
> Re-organize MTK ethernet phy drivers and integrate common manipulations
> into mtk-phy-lib. Also, add support for build-in 2.5Gphy on MT7988.
I assume this should go to net-next. You should mention the target tree
like [PATCH net-next 0/3] and so on, in this case it's pretty obvious
though.
Generally the series looks fine and I'm glad you factored-out common
parts like the LED handling which is a great improvement also for the
older PHYs found in MT7530 and MT7531 as well as MT7621 and MT7623N.
Splitting the the 3rd patch into more atomic changes would make
reviewing a bit easier.
Also note that I've recently submitted some fixes for the LED support
which now have already been accepted to the net tree, see
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=5b5f724b05c550e10693a53a81cadca901aefd16
So it might be the best to wait for the next round of rebase of net-next
before dealing with your suggested changes to spare maintainers from
having to deal with the merge conflicts otherwise.
Generally it'd also be nice to add support for the NO_LINK rule to the
netdev trigger, as it is supported by the hardware, but that can also be
done later obviously.
Cheers
Daniel
>
> SkyLake.Huang (3):
> net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
> net: phy: mediatek: Add mtk phy lib for token ring access & LED/other
> manipulations
> net: phy: mediatek: add support for built-in 2.5G ethernet PHY on
> MT7988
>
> MAINTAINERS | 7 +-
> drivers/net/phy/Kconfig | 17 +-
> drivers/net/phy/Makefile | 3 +-
> drivers/net/phy/mediatek-ge.c | 111 ----
> drivers/net/phy/mediatek/Kconfig | 33 ++
> drivers/net/phy/mediatek/Makefile | 5 +
> drivers/net/phy/mediatek/mtk-2p5ge.c | 399 +++++++++++++
> .../mtk-ge-soc.c} | 522 ++++++++----------
> drivers/net/phy/mediatek/mtk-ge.c | 191 +++++++
> drivers/net/phy/mediatek/mtk-phy-lib.c | 330 +++++++++++
> drivers/net/phy/mediatek/mtk.h | 97 ++++
> 11 files changed, 1277 insertions(+), 438 deletions(-)
> delete mode 100644 drivers/net/phy/mediatek-ge.c
> create mode 100644 drivers/net/phy/mediatek/Kconfig
> create mode 100644 drivers/net/phy/mediatek/Makefile
> create mode 100644 drivers/net/phy/mediatek/mtk-2p5ge.c
> rename drivers/net/phy/{mediatek-ge-soc.c => mediatek/mtk-ge-soc.c} (79%)
> create mode 100644 drivers/net/phy/mediatek/mtk-ge.c
> create mode 100644 drivers/net/phy/mediatek/mtk-phy-lib.c
> create mode 100644 drivers/net/phy/mediatek/mtk.h
>
> --
> 2.18.0
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988
2024-04-25 2:33 ` [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988 Sky Huang
@ 2024-04-25 9:01 ` Russell King (Oracle)
2024-04-25 15:37 ` Andrew Lunn
1 sibling, 0 replies; 11+ messages in thread
From: Russell King (Oracle) @ 2024-04-25 9:01 UTC (permalink / raw)
To: Sky Huang
Cc: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Daniel Golle, Qingfang Deng,
Matthias Brugger, AngeloGioacchino Del Regno, linux-kernel,
netdev, linux-arm-kernel, linux-mediatek, Steven Liu
On Thu, Apr 25, 2024 at 10:33:25AM +0800, Sky Huang wrote:
> +static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev)
> +{
> + int ret, i;
> + const struct firmware *fw;
> + struct device *dev = &phydev->mdio.dev;
> + struct device_node *np;
> + void __iomem *pmb_addr;
> + void __iomem *md32_en_cfg_base;
> + struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
> + u16 reg;
> + struct pinctrl *pinctrl;
> +
> + if (!priv->fw_loaded) {
> + np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw");
> + if (!np)
> + return -ENOENT;
> + pmb_addr = of_iomap(np, 0);
> + if (!pmb_addr)
> + return -ENOMEM;
> + md32_en_cfg_base = of_iomap(np, 1);
> + if (!md32_en_cfg_base)
> + return -ENOMEM;
Wouldn't it be better to do this in the probe function rather than here?
> +
> + ret = request_firmware(&fw, MT7988_2P5GE_PMB, dev);
> + if (ret) {
> + dev_err(dev, "failed to load firmware: %s, ret: %d\n",
> + MT7988_2P5GE_PMB, ret);
> + return ret;
> + }
This will block for userspace while holding phydev->lock and the RTNL.
That blocks much of the networking APIs, which is not a good idea. If
you have a number of these PHYs, then the RTNL will serialise the
loading of firmware.
> +
> + reg = readw(md32_en_cfg_base);
> + if (reg & MD32_EN) {
> + phy_set_bits(phydev, 0, BIT(15));
This is probably the BMCR, so if it is, please use the established
definitions.
> + usleep_range(10000, 11000);
> + }
> + phy_set_bits(phydev, 0, BIT(11));
This also looks like it's probably the BMCR.
> +
> + /* Write magic number to safely stall MCU */
> + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800e, 0x1100);
> + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800f, 0x00df);
> +
> + for (i = 0; i < fw->size - 1; i += 4)
> + writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
> + release_firmware(fw);
> +
> + writew(reg & ~MD32_EN, md32_en_cfg_base);
> + writew(reg | MD32_EN, md32_en_cfg_base);
> + phy_set_bits(phydev, 0, BIT(15));
And also probably the BMCR.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
2024-04-25 2:33 ` [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers Sky Huang
@ 2024-04-25 15:04 ` Andrew Lunn
2024-04-26 2:27 ` kernel test robot
1 sibling, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2024-04-25 15:04 UTC (permalink / raw)
To: Sky Huang
Cc: Heiner Kallweit, Russell King, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Daniel Golle, Qingfang Deng,
Matthias Brugger, AngeloGioacchino Del Regno, linux-kernel,
netdev, linux-arm-kernel, linux-mediatek, Steven Liu
On Thu, Apr 25, 2024 at 10:33:23AM +0800, Sky Huang wrote:
> From: "SkyLake.Huang" <skylake.huang@mediatek.com>
>
> Re-organize MediaTek ethernet phy driver files and get ready to integrate
> some common functions and add new 2.5G phy driver.
> mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
> mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
> mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988
>
> Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations
2024-04-25 2:33 ` [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations Sky Huang
@ 2024-04-25 15:13 ` Andrew Lunn
2024-04-25 18:05 ` kernel test robot
1 sibling, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2024-04-25 15:13 UTC (permalink / raw)
To: Sky Huang
Cc: Heiner Kallweit, Russell King, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Daniel Golle, Qingfang Deng,
Matthias Brugger, AngeloGioacchino Del Regno, linux-kernel,
netdev, linux-arm-kernel, linux-mediatek, Steven Liu
On Thu, Apr 25, 2024 at 10:33:24AM +0800, Sky Huang wrote:
> From: "SkyLake.Huang" <skylake.huang@mediatek.com>
>
> Integrate some common phy manipulations in mtk-phy-lib:
> 1. Token ring access: This is proprietary register access on page 52b5.
> Use these APIs so we can see which fields we're going to modify/set/clear.
> 2. LED: External/internal giga & internal 2.5g phy share almost the same
> LED control registers/logic.
> 3. Extend 1G TX/RX link pulse time: We observe that some devices' 1G
> training time violates specification, which may last 2230ms and affect
> later TX/RX link pulse time. So we try to extend our 1G TX/RX link pulse
> time so that we can still detect such devices.
Please break this up into 3 patches.
> -#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
> +
> +/* Registers on Token Ring debug nodes */
> +/* ch_addr = 0x0, node_addr = 0x7, data_addr = 0x15 */
> +#define NORMAL_MSE_LO_THRESH_MASK GENMASK(15, 8) /* NormMseLoThresh */
> +
> +/* ch_addr = 0x0, node_addr = 0xf, data_addr = 0x3c */
> +#define REMOTE_ACK_COUNT_LIMIT_CTRL_MASK GENMASK(2, 1) /* RemAckCntLimitCtrl */
> +
> +/* ch_addr = 0x1, node_addr = 0xd, data_addr = 0x20 */
> +#define VCO_SLICER_THRESH_HIGH_MASK GENMASK(23, 0) /* VcoSlicerThreshBitsHigh */
> +
> +/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x0 */
> +#define DFE_TAIL_EANBLE_VGA_TRHESH_1000 GENMASK(5, 1) /* DfeTailEnableVgaThresh1000 */
> +
> +/* ch_addr = 0x1, node_addr = 0xf, data_addr = 0x1 */
> +#define MRVL_TR_FIX_100KP_MASK GENMASK(22, 20) /* MrvlTrFix100Kp */
> +#define MRVL_TR_FIX_100KF_MASK GENMASK(19, 17) /* MrvlTrFix100Kf */
> +#define MRVL_TR_FIX_1000KP_MASK GENMASK(16, 14) /* MrvlTrFix1000Kp */
> +#define MRVL_TR_FIX_1000KF_MASK GENMASK(13, 11) /* MrvlTrFix1000Kf */
This is not what i would expect for moving code into a library. I
expect code to be deleted from one file and appear in another file,
with some minor changes, static dropped, EXPORT_SYMBOL_PHY added. If
i see code just move, i don't need to review it line for line. If you
do want to change the code, please move it into the library first, and
make modifications.
Lots of small patches, which are obviously correct.
Andrew
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988
2024-04-25 2:33 ` [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988 Sky Huang
2024-04-25 9:01 ` Russell King (Oracle)
@ 2024-04-25 15:37 ` Andrew Lunn
1 sibling, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2024-04-25 15:37 UTC (permalink / raw)
To: Sky Huang
Cc: Heiner Kallweit, Russell King, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Daniel Golle, Qingfang Deng,
Matthias Brugger, AngeloGioacchino Del Regno, linux-kernel,
netdev, linux-arm-kernel, linux-mediatek, Steven Liu
> +static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev)
> +{
> + int ret, i;
> + const struct firmware *fw;
> + struct device *dev = &phydev->mdio.dev;
> + struct device_node *np;
> + void __iomem *pmb_addr;
> + void __iomem *md32_en_cfg_base;
> + struct mtk_i2p5ge_phy_priv *priv = phydev->priv;
> + u16 reg;
> + struct pinctrl *pinctrl;
Reverse Christmas Tree please.
> +static int mt7988_2p5ge_phy_config_aneg(struct phy_device *phydev)
> +{
> + bool changed = false;
> + u32 adv;
> + int ret;
> +
> + if (phydev->autoneg == AUTONEG_DISABLE) {
> + /* Configure half duplex with genphy_setup_forced,
> + * because genphy_c45_pma_setup_forced does not support.
> + */
The English in that comment is wrong.
Ah, it appears to be a copy/paste, e.g. from mxl-gpy.c. In fact, a lot
of this function is identical to gpy_config_aneg(). Maybe it should be
pulled out into a helper.
> +static int mt7988_2p5ge_phy_get_features(struct phy_device *phydev)
> +{
> + int ret;
> +
> + ret = genphy_read_abilities(phydev);
> + if (ret)
> + return ret;
> +
> + /* We don't support HDX at MAC layer on mt7988.
> + * So mask phy's HDX capabilities, too.
> + */
This comment seems to contradict the comment above?
Also, this code does not mask anything, it sets bits. What does
genphy_read_abilities() find out about the device? If the hardware
confirms to the standard, it should not indicate is supports 1/2
duplex, genphy_read_abilities() should then not return those link
modes, but it should return 10, 100 and 1000 full duplex.
> + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
> + phydev->supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
> + phydev->supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
> + phydev->supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
> + phydev->supported);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
What does genphy_c45_pma_read_abilities() report about the device?
> +static int mt7988_2p5ge_phy_read_status(struct phy_device *phydev)
> +{
> + int ret;
> +
> + ret = genphy_update_link(phydev);
> + if (ret)
> + return ret;
> +
> + phydev->speed = SPEED_UNKNOWN;
> + phydev->duplex = DUPLEX_UNKNOWN;
> + phydev->pause = 0;
> + phydev->asym_pause = 0;
> +
> + if (phydev->autoneg == AUTONEG_ENABLE) {
> + if (phydev->autoneg_complete) {
> + ret = genphy_c45_read_lpa(phydev);
> + if (ret < 0)
> + return ret;
> +
> + /* Read the link partner's 1G advertisement */
> + ret = phy_read(phydev, MII_STAT1000);
> + if (ret < 0)
> + return ret;
> + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
> + } else if (!linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
> + phydev->advertising) &&
> + linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
> + phydev->advertising)) {
> + extend_an_new_lp_cnt_limit(phydev);
> + }
A comment about what is happening here would be good.
> + } else if (phydev->autoneg == AUTONEG_DISABLE) {
> + linkmode_zero(phydev->lp_advertising);
> + }
This if does not make much sense.
> + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
> + if (ret < 0)
> + return ret;
> + phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF;
Do does it support half duplex or not?
Andrew
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations
2024-04-25 2:33 ` [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations Sky Huang
2024-04-25 15:13 ` Andrew Lunn
@ 2024-04-25 18:05 ` kernel test robot
1 sibling, 0 replies; 11+ messages in thread
From: kernel test robot @ 2024-04-25 18:05 UTC (permalink / raw)
To: Sky Huang, Andrew Lunn, Heiner Kallweit, Russell King,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Daniel Golle, Qingfang Deng, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, linux-arm-kernel,
linux-mediatek
Cc: oe-kbuild-all, netdev, Steven Liu, SkyLake.Huang
Hi Sky,
kernel test robot noticed the following build warnings:
[auto build test WARNING on next-20240424]
[cannot apply to net-next/main net/main linus/master v6.9-rc5 v6.9-rc4 v6.9-rc3 v6.9-rc5]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Sky-Huang/net-phy-mediatek-Re-organize-MediaTek-ethernet-phy-drivers/20240425-103608
base: next-20240424
patch link: https://lore.kernel.org/r/20240425023325.15586-3-SkyLake.Huang%40mediatek.com
patch subject: [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations
config: mips-allyesconfig (https://download.01.org/0day-ci/archive/20240426/202404260115.HS8G6ns3-lkp@intel.com/config)
compiler: mips-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240426/202404260115.HS8G6ns3-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202404260115.HS8G6ns3-lkp@intel.com/
All warnings (new ones prefixed by >>):
>> drivers/net/phy/mediatek/mtk-phy-lib.c:51:13: warning: 'tr_write' defined but not used [-Wunused-function]
51 | static void tr_write(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr, u32 tr_data)
| ^~~~~~~~
>> drivers/net/phy/mediatek/mtk-phy-lib.c:33:13: warning: 'tr_read' defined but not used [-Wunused-function]
33 | static void tr_read(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
| ^~~~~~~
vim +/tr_write +51 drivers/net/phy/mediatek/mtk-phy-lib.c
32
> 33 static void tr_read(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
34 u16 *tr_high, u16 *tr_low)
35 {
36 phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
37 __tr_read(phydev, ch_addr, node_addr, data_addr, tr_high, tr_low);
38 phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
39 }
40
41 static void __tr_write(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr,
42 u32 tr_data)
43 {
44 __phy_write(phydev, 0x11, tr_data & 0xffff);
45 __phy_write(phydev, 0x12, tr_data >> 16);
46 dev_dbg(&phydev->mdio.dev, "tr_high write: 0x%x, tr_low write: 0x%x\n",
47 tr_data >> 16, tr_data & 0xffff);
48 tr_access(phydev, false, ch_addr, node_addr, data_addr);
49 }
50
> 51 static void tr_write(struct phy_device *phydev, u8 ch_addr, u8 node_addr, u8 data_addr, u32 tr_data)
52 {
53 phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
54 __tr_write(phydev, ch_addr, node_addr, data_addr, tr_data);
55 phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
56 }
57
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
2024-04-25 2:33 ` [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers Sky Huang
2024-04-25 15:04 ` Andrew Lunn
@ 2024-04-26 2:27 ` kernel test robot
1 sibling, 0 replies; 11+ messages in thread
From: kernel test robot @ 2024-04-26 2:27 UTC (permalink / raw)
To: Sky Huang, Andrew Lunn, Heiner Kallweit, Russell King,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Daniel Golle, Qingfang Deng, Matthias Brugger,
AngeloGioacchino Del Regno, linux-kernel, linux-arm-kernel,
linux-mediatek
Cc: Paul Gazzillo, Necip Fazil Yildiran, oe-kbuild-all, netdev,
Steven Liu, SkyLake.Huang
Hi Sky,
kernel test robot noticed the following build warnings:
[auto build test WARNING on next-20240424]
[cannot apply to net-next/main net/main linus/master v6.9-rc5 v6.9-rc4 v6.9-rc3 v6.9-rc5]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Sky-Huang/net-phy-mediatek-Re-organize-MediaTek-ethernet-phy-drivers/20240425-103608
base: next-20240424
patch link: https://lore.kernel.org/r/20240425023325.15586-2-SkyLake.Huang%40mediatek.com
patch subject: [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers
config: i386-kismet-CONFIG_NVMEM_MTK_EFUSE-CONFIG_MEDIATEK_GE_SOC_PHY-0-0 (https://download.01.org/0day-ci/archive/20240426/202404261047.Dx118RCc-lkp@intel.com/config)
reproduce: (https://download.01.org/0day-ci/archive/20240426/202404261047.Dx118RCc-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202404261047.Dx118RCc-lkp@intel.com/
kismet warnings: (new ones prefixed by >>)
>> kismet: WARNING: unmet direct dependencies detected for NVMEM_MTK_EFUSE when selected by MEDIATEK_GE_SOC_PHY
WARNING: unmet direct dependencies detected for NVMEM_MTK_EFUSE
Depends on [n]: NVMEM [=n] && (ARCH_MEDIATEK || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- MEDIATEK_GE_SOC_PHY [=y] && NETDEVICES [=y] && PHYLIB [=y] && (ARM64 && ARCH_MEDIATEK || COMPILE_TEST [=y])
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2024-04-26 2:28 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-25 2:33 [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Sky Huang
2024-04-25 2:33 ` [PATCH 1/3] net: phy: mediatek: Re-organize MediaTek ethernet phy drivers Sky Huang
2024-04-25 15:04 ` Andrew Lunn
2024-04-26 2:27 ` kernel test robot
2024-04-25 2:33 ` [PATCH 2/3] net: phy: mediatek: Add mtk phy lib for token ring access & LED/other manipulations Sky Huang
2024-04-25 15:13 ` Andrew Lunn
2024-04-25 18:05 ` kernel test robot
2024-04-25 2:33 ` [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988 Sky Huang
2024-04-25 9:01 ` Russell King (Oracle)
2024-04-25 15:37 ` Andrew Lunn
2024-04-25 3:05 ` [PATCH 0/3] net: phy: mediatek: Integrate mtk-phy-lib and add 2.5Gphy support Daniel Golle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).