Date | Commit message (Collapse) |
|
|
|
Now that we support tunnelling arbitrary protocols over HTTP as
well as "100 Continue" responses, TCP_NODELAY actually becomes
useful to us. TCP_NODELAY is actually reasonably portable
nowadays; even.
While we're adding non-portable options, TCP_CORK/TCP_NOPUSH can
be enabled, too. Unlike some other servers, these can't be
disabled explicitly/intelligently to force a flush, however.
However, these may still improve performance with "normal" HTTP
applications (Mongrel has always had TCP_CORK enabled in Linux).
While we're adding OS-specific features, we might as well
support TCP_DEFER_ACCEPT in Linux and FreeBSD the "httpready"
accept filter to prevent abuse.
These options can all be enabled on a per-listener basis.
(cherry picked from commit 563d03f649ef31d2aec3505cbbed1e015493b8fc)
|
|
|
|
This should be faster/cheaper than using an instance variable
since it's accessed in a critical code path. Unicorn was never
designed to be reentrant or thread-safe at all, either.
|
|
|
|
This should prevent Rack from being required too early
on so "-I" being passed through the unicorn command-line
can modify $LOAD_PATH for Rack
|
|
* commit 'v0.7.1':
unicorn 0.7.1
Conflicts:
lib/unicorn/const.rb
|
|
|
|
Rack::Lint says they just have to work when to_i is
called on the status, so that's what we'll do.
|
|
2 seconds is still prone to race conditions under high load.
We're intentionally less accurate than we could be in order to
reduce syscall and method dispatch overhead.
|
|
|
|
Ensure we preserve both internal and external encodings
when reopening logs.
|
|
Timeouts of less than 2 seconds are unsafe due to the lack of
subsecond resolution in most POSIX filesystems. This is the
trade-off for using a low-complexity solution for timeouts.
Since this type of timeout is a last resort; 2 seconds is not
entirely unreasonable IMNSHO. Additionally, timing out too
aggressively can put us in a fork loop and slow down the system.
Of course, the default is 60 seconds and most people do not
bother to change it.
|
|
"out" was an invalid variable in that context...
|
|
Don't allow newly created IO objects to get GC'ed and
subsequently close(2)-ed. We're not reopening the
{$std,STD}{in,out,err} variables since those can't be
trusted to have fileno 1, 2 and 3 respectively.
|
|
Unicorn proper no longer needs these constants,
so don't bother with them.
|
|
Rack::Lint says they just have to work when to_i is
called on the status, so that's what we'll do.
|
|
Preventing needless duplication since Rack already has these
codes for us. Also, put the status codes in HttpResponse since
nothing else needs (or should need) them.
|
|
If we're using middleware that pushes the body into an
array, bad things will happen if we're clobbering the
string for each iteration of body#each.
|
|
Give this a more palatable name and unfreeze it,
allowing users to modify it more easily.
|
|
2 seconds is still prone to race conditions under high load.
We're intentionally less accurate than we could be in order to
reduce syscall and method dispatch overhead.
|
|
This reduces garbage generation to improve performance. Rack
1.0 allows InputWrapper to read with an explicit buffer.
|
|
This allows alternative I/O implementations to be easier
to use with Unicorn...
|
|
|
|
Ensure we preserve both internal and external encodings
when reopening logs.
|
|
These potentially leaves an open file handle around until the
next request hits the process, but this makes the common case
faster.
|
|
Timeouts of less than 2 seconds are unsafe due to the lack of
subsecond resolution in most POSIX filesystems. This is the
trade-off for using a low-complexity solution for timeouts.
Since this type of timeout is a last resort; 2 seconds is not
entirely unreasonable IMNSHO. Additionally, timing out too
aggressively can put us in a fork loop and slow down the system.
Of course, the default is 60 seconds and most people do not
bother to change it.
|
|
readpartial is actually as low-level as sysread is,
except it's less likely to throw exceptions and
won't change the blocking/non-blocking status of
a file descriptor (we explicitly enable blocking I/O)
|
|
Simpler code on our end can be just a tick faster because
syscalls are still not as cheap as normal functions and this
still manages to play well with our lack of keepalive
support as closing the socket will flush it immediately.
|
|
Since the vast majority of web traffic is GET/HEAD
requests without bodies, avoid creating a StringIO
object for every single request that comes in.
|
|
"out" was an invalid variable in that context...
|
|
Don't allow newly created IO objects to get GC'ed and
subsequently close(2)-ed. We're not reopening the
{$std,STD}{in,out,err} variables since those can't be
trusted to have fileno 1, 2 and 3 respectively.
|
|
|
|
Keep in mind that it's plenty possible to use Unicorn as a
library without using Rack itself. Most of the unit tests
do not depend on Rack, for example.
|
|
The following specifications to bind port 8080 on all interfaces
are now accepted in the configuration file:
listen "8080" # (with quotes)
listen 8080 # (without quotes)
|
|
|
|
Avoid creating garbage every time we lookup the status code
along with the message. Also, we can use global const arrays
for a little extra performance because we only write one-at-a
time
Looking at MRI 1.8, Array#join with an empty string argument is
slightly better because it skips an append for every iteration.
|
|
|
|
This leads to a ~10% improvement in test/benchmark/request.rb
Some of these changes will need to be reworked for
multi-threaded servers (Mongrel); but Unicorn will always be
single-threaded.
|
|
It was just a waste of space and would've caused line wrapping.
This reinstates the "unicorn" prefix when we create tempfiles,
too.
|
|
StringIO.new(partial_body) does not update the offset for new
writes. So instead create the StringIO object and then syswrite
to it and try to follow the same code path used by large uploads
which use Tempfiles.
|
|
|
|
We no longer have anything outside of SocketHelper module in
that file, so just give it a more obvious name.
|
|
This removes the #unicorn_peeraddr methods from TCPSocket and
UNIXSocket core classes. Instead, just move that logic into the
only place it needs to be used in HttpRequest.
|
|
This avoids creating yet another binding. socket.syswrite()
should really only be called once since we use blocking sockets,
but just in case, we emulate a do+while loop with begin+while
|
|
|
|
|
|
Otherwise applications can change them behind our back
and affect subsequent requests.
|
|
It's part of the HTTP/1.1 (rfc2616), so we might as well
handle it in there and set PATH_INFO while we're at it.
Also, make "OPTIONS *" test not fail Rack::Lint
|
|
|