From: Shawn Guo <shawnguo@kernel.org> To: Frank.Li@freescale.com Cc: linux-arm-kernel@lists.infradead.org, shawn.guo@linaro.org, linus.walleij@linaro.org, lznuaa@gmail.com, linux-gpio@vger.kernel.org, robh+dt@kernel.org, devicetree@vger.kernel.org Subject: Re: [PATCH 1/8] ARM: imx: add i.mx6ul msl support Date: Thu, 9 Jul 2015 10:17:30 +0800 [thread overview] Message-ID: <20150709021730.GL28488@tiger> (raw) In-Reply-To: <1434555569-8237-2-git-send-email-Frank.Li@freescale.com> On Wed, Jun 17, 2015 at 11:39:22PM +0800, Frank.Li@freescale.com wrote: > From: Frank Li <Frank.Li@freescale.com> > > i.MX6UL is a new SOC, add MSL support > > Signed-off-by: Frank Li <Frank.Li@freescale.com> > --- > arch/arm/mach-imx/Kconfig | 8 ++++++++ > arch/arm/mach-imx/Makefile | 1 + > arch/arm/mach-imx/mach-imx6ul.c | 43 +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 52 insertions(+) > create mode 100644 arch/arm/mach-imx/mach-imx6ul.c > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 573536f..8ceda28 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -548,6 +548,14 @@ config SOC_IMX6SX > help > This enables support for Freescale i.MX6 SoloX processor. > > +config SOC_IMX6UL > + bool "i.MX6 UltraLite support" > + select PINCTRL_IMX6UL > + select SOC_IMX6 > + > + help > + This enables support for Freescale i.MX6 UltraLite processor. > + > config SOC_IMX7D > bool "i.MX7 Dual support" > select PINCTRL_IMX7D > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 37c502a..fb689d8 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -83,6 +83,7 @@ endif > obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o > obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o > obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o > +obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o > obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o > > ifeq ($(CONFIG_SUSPEND),y) > diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c > new file mode 100644 > index 0000000..706d5f6 > --- /dev/null > +++ b/arch/arm/mach-imx/mach-imx6ul.c > @@ -0,0 +1,43 @@ > +/* > + * Copyright (C) 2015 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +#include <linux/irqchip.h> > +#include <linux/of_platform.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +#include "common.h" > + > +static void __init imx6ul_init_machine(void) > +{ > + struct device *parent; > + > + parent = imx_soc_device_init(); How does the soc_id of soc_device work? I do not see any patch adding imx6ul soc_id. Shawn > + if (parent == NULL) > + pr_warn("failed to initialize soc device\n"); > + > + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); > + imx_anatop_init(); > +} > + > +static void __init imx6ul_init_irq(void) > +{ > + imx_init_revision_from_anatop(); > + imx_src_init(); > + irqchip_init(); > +} > + > +static const char *imx6ul_dt_compat[] __initconst = { > + "fsl,imx6ul", > + NULL, > +}; > + > +DT_MACHINE_START(IMX7D, "Freescale i.MX6 Ultralite (Device Tree)") > + .init_irq = imx6ul_init_irq, > + .init_machine = imx6ul_init_machine, > + .dt_compat = imx6ul_dt_compat, > +MACHINE_END > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
WARNING: multiple messages have this Message-ID (diff)
From: shawnguo@kernel.org (Shawn Guo) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/8] ARM: imx: add i.mx6ul msl support Date: Thu, 9 Jul 2015 10:17:30 +0800 [thread overview] Message-ID: <20150709021730.GL28488@tiger> (raw) In-Reply-To: <1434555569-8237-2-git-send-email-Frank.Li@freescale.com> On Wed, Jun 17, 2015 at 11:39:22PM +0800, Frank.Li at freescale.com wrote: > From: Frank Li <Frank.Li@freescale.com> > > i.MX6UL is a new SOC, add MSL support > > Signed-off-by: Frank Li <Frank.Li@freescale.com> > --- > arch/arm/mach-imx/Kconfig | 8 ++++++++ > arch/arm/mach-imx/Makefile | 1 + > arch/arm/mach-imx/mach-imx6ul.c | 43 +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 52 insertions(+) > create mode 100644 arch/arm/mach-imx/mach-imx6ul.c > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 573536f..8ceda28 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -548,6 +548,14 @@ config SOC_IMX6SX > help > This enables support for Freescale i.MX6 SoloX processor. > > +config SOC_IMX6UL > + bool "i.MX6 UltraLite support" > + select PINCTRL_IMX6UL > + select SOC_IMX6 > + > + help > + This enables support for Freescale i.MX6 UltraLite processor. > + > config SOC_IMX7D > bool "i.MX7 Dual support" > select PINCTRL_IMX7D > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 37c502a..fb689d8 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -83,6 +83,7 @@ endif > obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o > obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o > obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o > +obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o > obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o > > ifeq ($(CONFIG_SUSPEND),y) > diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c > new file mode 100644 > index 0000000..706d5f6 > --- /dev/null > +++ b/arch/arm/mach-imx/mach-imx6ul.c > @@ -0,0 +1,43 @@ > +/* > + * Copyright (C) 2015 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +#include <linux/irqchip.h> > +#include <linux/of_platform.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +#include "common.h" > + > +static void __init imx6ul_init_machine(void) > +{ > + struct device *parent; > + > + parent = imx_soc_device_init(); How does the soc_id of soc_device work? I do not see any patch adding imx6ul soc_id. Shawn > + if (parent == NULL) > + pr_warn("failed to initialize soc device\n"); > + > + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); > + imx_anatop_init(); > +} > + > +static void __init imx6ul_init_irq(void) > +{ > + imx_init_revision_from_anatop(); > + imx_src_init(); > + irqchip_init(); > +} > + > +static const char *imx6ul_dt_compat[] __initconst = { > + "fsl,imx6ul", > + NULL, > +}; > + > +DT_MACHINE_START(IMX7D, "Freescale i.MX6 Ultralite (Device Tree)") > + .init_irq = imx6ul_init_irq, > + .init_machine = imx6ul_init_machine, > + .dt_compat = imx6ul_dt_compat, > +MACHINE_END > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
next prev parent reply other threads:[~2015-07-09 2:17 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-06-17 15:39 [PATCH 0/8] add basic support for i.mx6 ul chip Frank.Li-KZfg59tc24xl57MIdRCFDg 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-06-17 15:39 ` [PATCH 1/8] ARM: imx: add i.mx6ul msl support Frank.Li 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-07-09 2:17 ` Shawn Guo [this message] 2015-07-09 2:17 ` Shawn Guo [not found] ` <1434555569-8237-1-git-send-email-Frank.Li-KZfg59tc24xl57MIdRCFDg@public.gmane.org> 2015-06-17 15:39 ` [PATCH 2/8] ARM: imx: add imx6ul clk tree support Frank.Li-KZfg59tc24xl57MIdRCFDg 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-06-18 5:40 ` Sascha Hauer 2015-06-18 5:40 ` Sascha Hauer 2015-06-17 15:39 ` [PATCH 5/8] ARM: dts: add i.mx6ul pin function include file Frank.Li-KZfg59tc24xl57MIdRCFDg 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-07-09 3:09 ` Shawn Guo 2015-07-09 3:09 ` Shawn Guo 2015-06-17 15:39 ` [PATCH 6/8] ARM: dts: imx: add imx6ul and imx6ul evk board support Frank.Li-KZfg59tc24xl57MIdRCFDg 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-06-18 5:50 ` Sascha Hauer 2015-06-18 5:50 ` Sascha Hauer 2015-07-09 7:02 ` Shawn Guo 2015-07-09 7:02 ` Shawn Guo 2015-06-17 15:39 ` [PATCH 7/8] ARM: imx: imx_v6_v7_defconfig enable imx6ul support Frank.Li-KZfg59tc24xl57MIdRCFDg 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-06-17 15:39 ` [PATCH 8/8] ARM: imx: add low-level debug support for i.mx6ul Frank.Li-KZfg59tc24xl57MIdRCFDg 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-06-17 15:39 ` [PATCH 3/8] Document: dt: binding: imx: update document for imx6ul support Frank.Li 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-07-09 2:36 ` Shawn Guo 2015-07-09 2:36 ` Shawn Guo 2015-06-17 15:39 ` [PATCH 4/8] ARM: pinctrl: imx: add i.mx6ul pinctrl driver Frank.Li 2015-06-17 15:39 ` Frank.Li at freescale.com 2015-07-09 2:38 ` Shawn Guo 2015-07-09 2:38 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20150709021730.GL28488@tiger \ --to=shawnguo@kernel.org \ --cc=Frank.Li@freescale.com \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=lznuaa@gmail.com \ --cc=robh+dt@kernel.org \ --cc=shawn.guo@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.