From: Stafford Horne <shorne@gmail.com>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>,
Stafford Horne <shorne@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Jonas Bonn <jonas@southpole.se>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, openrisc@lists.librecores.org
Subject: [PATCH v4 10/13] openrisc: add simple_smp dts and defconfig for simulators
Date: Mon, 30 Oct 2017 08:11:20 +0900 [thread overview]
Message-ID: <20171029231123.27281-11-shorne@gmail.com> (raw)
In-Reply-To: <20171029231123.27281-1-shorne@gmail.com>
From: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Simple enough to be compatible with simulation environments,
such as verilated systems, QEMU and other targets supporting OpenRISC
SMP. This also supports our base FPGA SoC's if the cpu frequency is
upped to 50Mhz.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
[shorne@gmail.com: Added defconfig]
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
Changes since v3
- none
Changes since v2
- Fix stdout-path
Changes since v1
- Use openrisc, prefix for ompic
- Add stdout-path
- Remove @interrupt cells
arch/openrisc/boot/dts/simple_smp.dts | 63 ++++++++++++++++++++++++++++
arch/openrisc/configs/simple_smp_defconfig | 66 ++++++++++++++++++++++++++++++
2 files changed, 129 insertions(+)
create mode 100644 arch/openrisc/boot/dts/simple_smp.dts
create mode 100644 arch/openrisc/configs/simple_smp_defconfig
diff --git a/arch/openrisc/boot/dts/simple_smp.dts b/arch/openrisc/boot/dts/simple_smp.dts
new file mode 100644
index 000000000000..defbb92714ec
--- /dev/null
+++ b/arch/openrisc/boot/dts/simple_smp.dts
@@ -0,0 +1,63 @@
+/dts-v1/;
+/ {
+ compatible = "opencores,or1ksim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&pic>;
+
+ aliases {
+ uart0 = &serial0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "uart0:115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <0>;
+ clock-frequency = <20000000>;
+ };
+ cpu@1 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <1>;
+ clock-frequency = <20000000>;
+ };
+ };
+
+ ompic: ompic@98000000 {
+ compatible = "openrisc,ompic";
+ reg = <0x98000000 16>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ interrupts = <1>;
+ };
+
+ /*
+ * OR1K PIC is built into CPU and accessed via special purpose
+ * registers. It is not addressable and, hence, has no 'reg'
+ * property.
+ */
+ pic: pic {
+ compatible = "opencores,or1k-pic-level";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ serial0: serial@90000000 {
+ compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
+ reg = <0x90000000 0x100>;
+ interrupts = <2>;
+ clock-frequency = <20000000>;
+ };
+
+};
diff --git a/arch/openrisc/configs/simple_smp_defconfig b/arch/openrisc/configs/simple_smp_defconfig
new file mode 100644
index 000000000000..b6e3c7e158e7
--- /dev/null
+++ b/arch/openrisc/configs/simple_smp_defconfig
@@ -0,0 +1,66 @@
+CONFIG_CROSS_COMPILE="or1k-linux-"
+CONFIG_LOCALVERSION="-simple-smp"
+CONFIG_NO_HZ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_EPOLL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+CONFIG_MODULES=y
+# CONFIG_BLOCK is not set
+CONFIG_OPENRISC_BUILTIN_DTB="simple_smp"
+CONFIG_SMP=y
+CONFIG_HZ_100=y
+CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_XZ_DEC=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_RCU_TRACE is not set
--
2.13.6
WARNING: multiple messages have this Message-ID (diff)
From: Stafford Horne <shorne@gmail.com>
To: openrisc@lists.librecores.org
Subject: [OpenRISC] [PATCH v4 10/13] openrisc: add simple_smp dts and defconfig for simulators
Date: Mon, 30 Oct 2017 08:11:20 +0900 [thread overview]
Message-ID: <20171029231123.27281-11-shorne@gmail.com> (raw)
In-Reply-To: <20171029231123.27281-1-shorne@gmail.com>
From: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Simple enough to be compatible with simulation environments,
such as verilated systems, QEMU and other targets supporting OpenRISC
SMP. This also supports our base FPGA SoC's if the cpu frequency is
upped to 50Mhz.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
[shorne at gmail.com: Added defconfig]
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
Changes since v3
- none
Changes since v2
- Fix stdout-path
Changes since v1
- Use openrisc, prefix for ompic
- Add stdout-path
- Remove @interrupt cells
arch/openrisc/boot/dts/simple_smp.dts | 63 ++++++++++++++++++++++++++++
arch/openrisc/configs/simple_smp_defconfig | 66 ++++++++++++++++++++++++++++++
2 files changed, 129 insertions(+)
create mode 100644 arch/openrisc/boot/dts/simple_smp.dts
create mode 100644 arch/openrisc/configs/simple_smp_defconfig
diff --git a/arch/openrisc/boot/dts/simple_smp.dts b/arch/openrisc/boot/dts/simple_smp.dts
new file mode 100644
index 000000000000..defbb92714ec
--- /dev/null
+++ b/arch/openrisc/boot/dts/simple_smp.dts
@@ -0,0 +1,63 @@
+/dts-v1/;
+/ {
+ compatible = "opencores,or1ksim";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&pic>;
+
+ aliases {
+ uart0 = &serial0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "uart0:115200";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu at 0 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <0>;
+ clock-frequency = <20000000>;
+ };
+ cpu at 1 {
+ compatible = "opencores,or1200-rtlsvn481";
+ reg = <1>;
+ clock-frequency = <20000000>;
+ };
+ };
+
+ ompic: ompic at 98000000 {
+ compatible = "openrisc,ompic";
+ reg = <0x98000000 16>;
+ interrupt-controller;
+ #interrupt-cells = <0>;
+ interrupts = <1>;
+ };
+
+ /*
+ * OR1K PIC is built into CPU and accessed via special purpose
+ * registers. It is not addressable and, hence, has no 'reg'
+ * property.
+ */
+ pic: pic {
+ compatible = "opencores,or1k-pic-level";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ serial0: serial at 90000000 {
+ compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
+ reg = <0x90000000 0x100>;
+ interrupts = <2>;
+ clock-frequency = <20000000>;
+ };
+
+};
diff --git a/arch/openrisc/configs/simple_smp_defconfig b/arch/openrisc/configs/simple_smp_defconfig
new file mode 100644
index 000000000000..b6e3c7e158e7
--- /dev/null
+++ b/arch/openrisc/configs/simple_smp_defconfig
@@ -0,0 +1,66 @@
+CONFIG_CROSS_COMPILE="or1k-linux-"
+CONFIG_LOCALVERSION="-simple-smp"
+CONFIG_NO_HZ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_EPOLL is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+CONFIG_MODULES=y
+# CONFIG_BLOCK is not set
+CONFIG_OPENRISC_BUILTIN_DTB="simple_smp"
+CONFIG_SMP=y
+CONFIG_HZ_100=y
+CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_XZ_DEC=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_RCU_TRACE is not set
--
2.13.6
next prev parent reply other threads:[~2017-10-29 23:13 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-29 23:11 [PATCH v4 00/13] OpenRISC SMP Support Stafford Horne
2017-10-29 23:11 ` [PATCH v4 01/13] openrisc: use shadow registers to save regs on exception Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 02/13] openrisc: add 1 and 2 byte cmpxchg support Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 03/13] openrisc: use qspinlocks and qrwlocks Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 04/13] dt-bindings: add openrisc to vendor prefixes list Stafford Horne
2017-10-29 23:11 ` [PATCH v4 05/13] irqchip: add initial support for ompic Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-30 2:29 ` Marc Zyngier
2017-10-30 2:29 ` [OpenRISC] " Marc Zyngier
2017-10-30 2:29 ` Marc Zyngier
2017-10-30 4:18 ` Stafford Horne
2017-10-30 4:18 ` [OpenRISC] " Stafford Horne
2017-10-30 4:18 ` Stafford Horne
2017-10-30 6:11 ` Marc Zyngier
2017-10-30 6:11 ` [OpenRISC] " Marc Zyngier
2017-11-01 12:17 ` Stafford Horne
2017-11-01 12:17 ` [OpenRISC] " Stafford Horne
2017-11-01 12:17 ` Stafford Horne
2017-10-29 23:11 ` [PATCH v4 06/13] openrisc: initial SMP support Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 07/13] openrisc: fix initial preempt state for secondary cpu tasks Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 08/13] openrisc: sleep instead of spin on secondary wait Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 09/13] openrisc: add cacheflush support to fix icache aliasing Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` Stafford Horne [this message]
2017-10-29 23:11 ` [OpenRISC] [PATCH v4 10/13] openrisc: add simple_smp dts and defconfig for simulators Stafford Horne
2017-10-29 23:11 ` [PATCH v4 11/13] openrisc: support framepointers and STACKTRACE_SUPPORT Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 12/13] openrisc: enable LOCKDEP_SUPPORT and irqflags tracing Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-29 23:11 ` [PATCH v4 13/13] openrisc: add tick timer multi-core sync logic Stafford Horne
2017-10-29 23:11 ` [OpenRISC] " Stafford Horne
2017-10-31 14:06 ` Matt Redfearn
2017-10-31 14:06 ` [OpenRISC] " Matt Redfearn
2017-10-31 23:17 ` Stafford Horne
2017-10-31 23:17 ` [OpenRISC] " Stafford Horne
2017-11-01 0:34 ` Stafford Horne
2017-11-01 0:34 ` [OpenRISC] " Stafford Horne
2017-11-01 9:26 ` Matt Redfearn
2017-11-01 9:26 ` [OpenRISC] " Matt Redfearn
2017-11-01 9:26 ` Matt Redfearn
2017-11-01 12:15 ` Stafford Horne
2017-11-01 12:15 ` [OpenRISC] " Stafford Horne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171029231123.27281-11-shorne@gmail.com \
--to=shorne@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jonas@southpole.se \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openrisc@lists.librecores.org \
--cc=robh+dt@kernel.org \
--cc=stefan.kristiansson@saunalahti.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.