From: Bhuvanchandra DV <bhuvanchandradv@gmail.com>
To: Richard Weinberger <richard@nod.at>,
Bhuvanchandra DV <bhuvanchandradv@gmail.com>
Cc: "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>
Subject: Re: UBIFS errors when file-system is full
Date: Tue, 14 Jul 2015 12:00:18 +0530 [thread overview]
Message-ID: <55A4AC7A.1020203@gmail.com> (raw)
In-Reply-To: <55A4A896.9050500@nod.at>
On 07/14/2015 11:43 AM, Richard Weinberger wrote:
> Am 14.07.2015 um 06:23 schrieb Bhuvanchandra DV:
>> Hello Richard,
>>
>> On 07/13/2015 07:39 PM, Richard Weinberger wrote:
>>
>>> On Mon, Jul 13, 2015 at 3:55 PM, Bhuvanchandra DV
>>> <bhuvanchandradv@gmail.com> wrote:
>>>> Hello,
>>>>
>>>> Facing some issues with UBIFS mounting when NAND flash is almost near to
>>>> full.
>>>>
>>>> Hardware:
>>>> SOC: Freescale Vybrid
>>>> COM: Colibri VF50
>>>> Flash: Macronic NAND 128MB, 3.3V, 8-Bit
>>>>
>>>> By default the Linux Image flashed on the NAND flash almost occupies ~93% of
>>>> the flash.
>>>> Observed this issue when power resetting the module for about 500 times,
>>>> with journalctl
>>>> enabled, after around 500 power cycles the debug log fills up the nand
>>>> flash. When the
>>>> flash menory is about to full, the ubifs partation is un-mountable.
>>>>
>>>> The nand flash controller driver is under review and passed all MTD tests.
>>>> https://lkml.org/lkml/2015/6/18/847
>>>>
>>>>
>>>> Debug log during UBIFS mounting from U-Boot:
>>>>
>>>> U-Boot 2015.04 (May 18 2015 - 15:37:34)
>>>>
>>>> CPU: Freescale Vybrid VF500 at 396 MHz
>>>> Reset cause: POWER ON RESET
>>>> DRAM: 128 MiB
>>>> NAND: 128 MiB
>>>> MMC: FSL_SDHC: 0
>>>> *** Warning - bad CRC, using default environment
>>>>
>>>> In: serial
>>>> Out: serial
>>>> Err: serial
>>>> Model: Toradex Colibri VF50 128MB V1.1A, Serial# 04815679
>>>> Net: FEC
>>>> Hit any key to stop autoboot: 0
>>>> Booting from NAND...
>>>> UBI: default fastmap pool size: 50
>>>> UBI: default fastmap WL pool size: 25
>>>> UBI: attaching mtd1 to ubi0
>>>> UBI: attached by fastmap
>>> Is this a recent kernel with all fastmap fixes applied?
>> I'm sorry! I didn't mention about the kernel version before.
>>
>> Tested with 4.0.5 kernel[1]. I think your fastmap fixes[2] are not available with
>> this kernel version.
>>
>> Lately also tested on 4.1.1 kernel[3], observed the same issues.
> I'm confused. Does this mean that you can _reproduce_ the issue from a clean
> working UBI image also with 4.1.1?
> Or does it mean that the already broken image does also not work with 4.1.1?
Reproduced the issue with a clean UBI image.
>
> Thanks,
> //richard
>
Best regards,
Bhuvan
next prev parent reply other threads:[~2015-07-14 6:30 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 13:55 UBIFS errors when file-system is full Bhuvanchandra DV
2015-07-13 14:09 ` Richard Weinberger
2015-07-14 4:23 ` Bhuvanchandra DV
2015-07-14 6:13 ` Richard Weinberger
2015-07-14 6:30 ` Bhuvanchandra DV [this message]
2015-07-14 6:32 ` Richard Weinberger
2015-07-14 8:29 ` Bhuvanchandra DV
2015-07-14 8:42 ` Richard Weinberger
2015-07-14 10:08 ` Bhuvanchandra DV
2015-07-14 11:06 ` Richard Weinberger
[not found] ` <55A74812.2020906@gmail.com>
2015-07-16 7:35 ` Fwd: " Bhuvanchandra DV
[not found] ` <55A74AA1.2000000@nod.at>
[not found] ` <55A7540C.3050900@nod.at>
[not found] ` <55A7592D.6010906@gmail.com>
[not found] ` <55A75A05.7040603@nod.at>
2015-07-16 7:33 ` Bhuvanchandra DV
2015-07-21 6:04 ` Bhuvanchandra DV
2015-07-21 6:14 ` Richard Weinberger
2015-07-22 7:10 ` Bhuvanchandra DV
2015-07-22 7:20 ` Richard Weinberger
2015-07-24 14:43 ` Bhuvanchandra DV
2015-07-24 16:51 ` Richard Weinberger
2015-07-31 16:47 ` Bhuvanchandra DV
2015-08-01 6:36 ` Richard Weinberger
2015-08-06 10:31 ` Bhuvanchandra DV
2015-08-07 12:37 ` Richard Weinberger
2015-08-12 7:01 ` Stefan Agner
2015-08-12 7:27 ` Richard Weinberger
2015-09-01 0:45 ` Stefan Agner
2015-09-01 1:43 ` Brian Norris
2015-09-01 2:20 ` Stefan Agner
2015-09-02 19:58 ` Stefan Agner
2015-09-02 20:13 ` Brian Norris
2015-09-02 20:41 ` Stefan Agner
2015-09-07 13:47 ` Bhuvanchandra
2015-09-11 4:03 ` Bhuvanchandra
2015-09-12 9:39 ` Richard Weinberger
2015-09-13 4:45 ` Bhuvanchandra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A4AC7A.1020203@gmail.com \
--to=bhuvanchandradv@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.