From: Bhuvanchandra DV <bhuvanchandradv@gmail.com>
To: Richard Weinberger <richard@nod.at>
Cc: "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>
Subject: Re: UBIFS errors when file-system is full
Date: Tue, 14 Jul 2015 13:59:26 +0530 [thread overview]
Message-ID: <55A4C866.2010400@gmail.com> (raw)
In-Reply-To: <55A4ACEF.20307@nod.at>
On 07/14/2015 12:02 PM, Richard Weinberger wrote:
> Am 14.07.2015 um 08:30 schrieb Bhuvanchandra DV:
>> Reproduced the issue with a clean UBI image.
> On 4.1?
> How can you reproduce?
Flashed a clean UBI image with 4.1.
I can reproduce it by amost filling up the flash and doing a power resets for around ~200 cycles.
During some point U-Boot cannot mount the ubifs partition and fails with:
"Error reading superblock on volume 'ubi0:rootfs' errno=-22!"
Tried to mount the same ubifs partition via tftp, got stack trace when trying to mount the ubifs.
Complete debug log when booting with tftp:
Colibri VFxx # setenv bootargs ${defargs} ${ubiargs} ${mtdparts} ${setupargs} ${vidargs}
Colibri VFxx # dhcp ${kernel_addr_r} && tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && bootz ${kernel_addr_r} - ${fdt_addr_r}
BOOTP broadcast 1
DHCP client bound to address 10.18.0.144 (3 ms)
Using FEC device
TFTP from server 10.18.0.132; our IP address is 10.18.0.144
Filename 'zImage'.
Load address: 0x82000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
##########################################
760.7 KiB/s
done
Bytes transferred = 4431512 (439e98 hex)
Using FEC device
TFTP from server 10.18.0.132; our IP address is 10.18.0.144
Filename 'vf500-colibri-eval-v3.dtb'.
Load address: 0x84000000
Loading: ##
256.8 KiB/s
done
Bytes transferred = 20846 (516e hex)
Kernel image @ 0x82000000 [ 0x000000 - 0x439e98 ]
## Flattened Device Tree blob at 84000000
Booting using the fdt blob at 0x84000000
Loading Device Tree to 876ff000, end 8770716d ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.1.1-00245-g4a73219 (dvb@dev) (gcc version 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #2 Tue Jul 14 13:01:16 I5
[ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Toradex Colibri VF50 on Colibri Evaluation Board
[ 0.000000] cma: Reserved 16 MiB at 0x86400000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32004
[ 0.000000] Kernel command line: ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs ubi.fm_autoconvert=1 mtdparts=vf610_nfc:128k(vf-bcb)ro,1408k(u-boo0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 103176K/129024K available (5715K kernel code, 201K rwdata, 1840K rodata, 216K init, 171K bss, 9464K reserved, 16384K cma-rese)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x88000000 - 0xff000000 (1904 MB)
[ 0.000000] lowmem : 0x80000000 - 0x87e00000 ( 126 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x8076904c (7557 kB)
[ 0.000000] .init : 0x8076a000 - 0x807a0000 ( 216 kB)
[ 0.000000] .data : 0x807a0000 - 0x807d24a0 ( 202 kB)
[ 0.000000] .bss : 0x807d24a0 - 0x807fd0d0 ( 172 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: failed to init: -19
[ 0.000054] sched_clock: 64 bits at 132MHz, resolution 7ns, wraps every 2199023255551ns
[ 0.000125] clocksource arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1e7178659b, max_idle_ns: 440795204301 ns
[ 0.000849] Console: colour dummy device 80x30
[ 0.002020] console [tty1] enabled
[ 0.002121] Calibrating delay loop... 262.96 BogoMIPS (lpj=1314816)
[ 0.070303] pid_max: default: 32768 minimum: 301
[ 0.070668] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070779] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.072749] CPU: Testing write buffer coherency: ok
[ 0.073687] Setting up static identity map for 0x80008200 - 0x80008258
[ 0.077538] devtmpfs: initialized
[ 0.090865] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
[ 0.091928] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.095527] pinctrl core: initialized pinctrl subsystem
[ 0.098746] NET: Registered protocol family 16
[ 0.102859] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105728] cpuidle: using governor menu
[ 0.134103] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.134261] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.135299] vf610-pinctrl 40048000.iomuxc: initialized IMX pinctrl driver
[ 0.171433] SCSI subsystem initialized
[ 0.172626] usbcore: registered new interface driver usbfs
[ 0.172993] usbcore: registered new interface driver hub
[ 0.173374] usbcore: registered new device driver usb
[ 0.175965] i2c i2c-0: IMX I2C adapter registered
[ 0.176207] i2c i2c-0: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[ 0.176666] Linux video capture interface: v2.00
[ 0.177092] pps_core: LinuxPPS API ver. 1 registered
[ 0.177173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.177397] PTP clock support registered
[ 0.178934] Advanced Linux Sound Architecture Driver Initialized.
[ 0.182091] Switched to clocksource arm_global_timer
[ 0.220933] NET: Registered protocol family 2
[ 0.223441] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.223620] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.223734] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.224144] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.224276] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.224870] NET: Registered protocol family 1
[ 0.225936] RPC: Registered named UNIX socket transport module.
[ 0.226064] RPC: Registered udp transport module.
[ 0.226135] RPC: Registered tcp transport module.
[ 0.226199] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.230980] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.255535] NFS: Registering the id_resolver key type
[ 0.255804] Key type id_resolver registered
[ 0.255890] Key type id_legacy registered
[ 0.256040] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.257822] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.259474] fuse init (API version 7.23)
[ 0.268197] io scheduler noop registered
[ 0.268343] io scheduler deadline registered
[ 0.268620] io scheduler cfq registered (default)
[ 0.280233] backlight supply power not found, using dummy regulator
[ 0.301896] Console: switching to colour frame buffer device 80x30
[ 0.313909] fb0: fb device registered successfully.
[ 0.319322] fb1: fb device registered successfully.
[ 0.324671] fb2: fb device registered successfully.
[ 0.329643] fb3: fb device registered successfully.
[ 0.334724] fb4: fb device registered successfully.
[ 0.339378] fb5: fb device registered successfully.
[ 0.344996] 40027000.serial: ttyLP0 at MMIO 0x40027000 (irq = 19, base_baud = 4125000) is a FSL_LPUART
[ 0.888645] console [ttyLP0] enabled
[ 0.897621] 40028000.serial: ttyLP1 at MMIO 0x40028000 (irq = 20, base_baud = 4125000) is a FSL_LPUART
[ 0.916706] 40029000.serial: ttyLP2 at MMIO 0x40029000 (irq = 21, base_baud = 4125000) is a FSL_LPUART
[ 0.955586] loop: module loaded
[ 0.966803] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 0.977644] nand: Macronix NAND 128MiB 3,3V 8-bit
[ 0.986782] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.003429] Bad block table found at page 65472, version 0x01
[ 1.014062] Bad block table found at page 65408, version 0x01
[ 1.024768] 4 cmdlinepart partitions found on MTD device vf610_nfc
[ 1.035640] Creating 4 MTD partitions on "vf610_nfc":
[ 1.045408] 0x000000000000-0x000000020000 : "vf-bcb"
[ 1.056418] 0x000000020000-0x000000180000 : "u-boot"
[ 1.067310] 0x000000180000-0x000000200000 : "u-boot-env"
[ 1.078436] 0x000000200000-0x000008000000 : "ubi"
[ 1.095947] 400d1000.ethernet supply phy not found, using dummy regulator
[ 1.117728] libphy: fec_enet_mii_bus: probed
[ 1.128873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.141625] usbcore: registered new interface driver usb-storage
[ 1.153688] usbcore: registered new interface driver usbserial
[ 1.164859] usbcore: registered new interface driver usbserial_generic
[ 1.176470] usbserial: USB Serial support registered for generic
[ 1.187664] usbcore: registered new interface driver ftdi_sio
[ 1.198481] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.215340] usbcore: registered new interface driver pl2303
[ 1.225866] usbserial: USB Serial support registered for pl2303
[ 1.246498] imx_usb 400b4000.usb: Can't register ci_hdrc platform device, err=-517
[ 1.265515] mousedev: PS/2 mouse device common for all mice
[ 1.277903] rtc-ds1307: probe of 0-0068 failed with error -5
[ 1.290355] snvs_rtc 400a7034.snvs-rtc-lp: rtc core: registered 400a7034.snvs-rtc-l as rtc0
[ 1.308688] i2c /dev entries driver
[ 1.321359] imx2-wdt 4003e000.wdog: timeout 60 sec (nowayout=0)
[ 1.333032] sdhci: Secure Digital Host Controller Interface driver
[ 1.344317] sdhci: Copyright(c) Pierre Ossman
[ 1.353809] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.366082] /soc/aips-bus@40080000/esdhc@400b2000: voltage-ranges unspecified
[ 1.378925] sdhci-esdhc-imx 400b2000.esdhc: Got CD GPIO
[ 1.389963] sdhci-esdhc-imx 400b2000.esdhc: No vmmc regulator found
[ 1.401634] sdhci-esdhc-imx 400b2000.esdhc: No vqmmc regulator found
[ 1.452220] mmc0: SDHCI controller on 400b2000.esdhc [400b2000.esdhc] using ADMA
[ 1.475559] usbcore: registered new interface driver usbhid
[ 1.486806] usbhid: USB HID core driver
[ 1.497384] 4003b000.adc supply vref not found, using dummy regulator
[ 1.514460] 400bb000.adc supply vref not found, using dummy regulator
[ 1.531429] Netfilter messages via NETLINK v0.30.
[ 1.542908] nfnl_acct: registering with nfnetlink.
[ 1.553034] nf_conntrack version 0.5.0 (1868 buckets, 7472 max)
[ 1.569452] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 1.583336] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.596707] NET: Registered protocol family 10
[ 1.610419] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.621187] sit: IPv6 over IPv4 tunneling driver
[ 1.634053] NET: Registered protocol family 17
[ 1.643852] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.666816] Bridge firewalling registered
[ 1.677391] 8021q: 802.1Q VLAN Support v1.8
[ 1.689062] Key type dns_resolver registered
[ 1.698929] Registering SWP/SWPB emulation handler
[ 1.712281] registered taskstats version 1
[ 1.728415] usbh_vbus: supplied by 5v0
[ 1.741823] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.752957] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[ 1.782224] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.795354] hub 1-0:1.0: USB hub found
[ 1.804157] hub 1-0:1.0: 1 port detected
[ 1.816698] input: colibri-vf50-ts as /devices/platform/vf50_touchctrl/input/input0
[ 1.836924] toradex,vf50_touchctrl vf50_touchctrl: Attached colibri-vf50-ts driver successfully
[ 1.856553] ubi0: default fastmap pool size: 50
[ 1.866179] ubi0: default fastmap WL pool size: 25
[ 1.875836] ubi0: attaching mtd3
[ 1.975937] ubi0: attached by fastmap
[ 1.984411] ubi0: fastmap pool size: 50
[ 1.992859] ubi0: fastmap WL pool size: 25
[ 2.012913] ubi0: attached mtd3 (name "ubi", size 126 MiB)
[ 2.023140] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.034658] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.046015] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.057546] ubi0: good PEBs: 1004, bad PEBs: 4, corrupted PEBs: 0
[ 2.068348] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 2.084771] ubi0: max/mean erase counter: 29/6, WL threshold: 4096, image sequence number: 0
[ 2.102911] ubi0: available PEBs: 0, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 16
[ 2.122563] ubi0: background thread "ubi_bgt0d" started, PID 50
[ 2.135081] snvs_rtc 400a7034.snvs-rtc-lp: setting system clock to 2015-07-14 08:17:11 UTC (1436861831)
[ 2.170929] ALSA device list:
[ 2.179354] No soundcards found.
[ 2.192343] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 2.227211] UBIFS (ubi0:0): recovery needed
[ 2.355517] hub 1-1:1.0: USB hub found
[ 2.365430] hub 1-1:1.0: 4 ports detected
[ 2.410558] UBIFS error (ubi0:0 pid 1): ubifs_read_node: bad node type (10 but expected 3)
[ 2.429359] UBIFS error (ubi0:0 pid 1): ubifs_read_node: bad node at LEB 908:29408, LEB mapping status 1
[ 2.450012] Not a node, first 24 bytes:
[ 2.453975] 00000000: dc 06 05 48 11 b3 9a 28 d9 b4 f1 90 1a 70 00 de 05 98 d2 bc 0a 68 02 6c ...H...(.....p.......h.l
[ 2.483992] CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.1-00245-g4a73219 #2
[ 2.496932] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 2.509317] Backtrace:
[ 2.517656] [<80012ab8>] (dump_backtrace) from [<80012cd8>] (show_stack+0x18/0x1c)
[ 2.536748] r7:00000000 r6:00000000 r5:0000038c r4:000072e0
[ 2.548497] [<80012cc0>] (show_stack) from [<80597828>] (dump_stack+0x24/0x28)
[ 2.567075] [<80597804>] (dump_stack) from [<8022dbe8>] (ubifs_read_node+0x294/0x310)
[ 2.586390] [<8022d954>] (ubifs_read_node) from [<8022dd0c>] (ubifs_read_node_wbuf+0xa8/0x2fc)
[ 2.606659] r10:0000038c r9:00000049 r8:87be6380 r7:00000003 r6:87b53000 r5:87b4db20
[ 2.626990] r4:000072e0
[ 2.635632] [<8022dc64>] (ubifs_read_node_wbuf) from [<8024b39c>] (ubifs_tnc_read_node+0x50/0x140)
[ 2.657072] r10:87bd7a00 r9:87be6380 r8:87bd7a00 r7:00000003 r6:87be6380 r5:87b53000
[ 2.677875] r4:87bd7a30
[ 2.686669] [<8024b34c>] (ubifs_tnc_read_node) from [<8022ec3c>] (tnc_read_node_nm+0xcc/0x1e4)
[ 2.707690] r8:87bd7a00 r7:87b531c0 r6:87b53000 r5:87be6380 r4:87bd7a30
[ 2.721103] [<8022eb70>] (tnc_read_node_nm) from [<80232784>] (ubifs_tnc_next_ent+0x140/0x1a4)
[ 2.742233] r7:87b531c0 r6:87b53000 r5:87849c38 r4:00000030
[ 2.754489] [<80232644>] (ubifs_tnc_next_ent) from [<8023289c>] (ubifs_tnc_remove_ino+0xb4/0x144)
[ 2.775956] r10:87b53000 r9:00003ee1 r8:ffffffff r7:00000000 r6:000003b3 r5:87b53000
[ 2.796730] r4:87bddde0
[ 2.805546] [<802327e8>] (ubifs_tnc_remove_ino) from [<80235468>] (ubifs_replay_journal+0xe9c/0x1490)
[ 2.827195] r10:87b53000 r9:87849d08 r8:87bdddc0 r7:87b53930 r6:000003b3 r5:00000000
[ 2.847754] r4:87bddde0
[ 2.856397] [<802345cc>] (ubifs_replay_journal) from [<8022a01c>] (ubifs_mount+0x10f8/0x1740)
[ 2.876909] r10:87b53190 r9:00000000 r8:0001e5a0 r7:87b47c00 r6:87b53000 r5:00000000
[ 2.897398] r4:00000000
[ 2.906044] [<80228f24>] (ubifs_mount) from [<800c47c0>] (mount_fs+0x1c/0xac)
[ 2.919382] r10:00008001 r9:00000060 r8:807b13e8 r7:807b13e8 r6:00008001 r5:87b58a00
[ 2.939597] r4:87b0a600
[ 2.948224] [<800c47a4>] (mount_fs) from [<800dba54>] (vfs_kern_mount+0x50/0xfc)
[ 2.967514] r8:00000000 r7:807b13e8 r6:00008001 r5:87b58a00 r4:87b0a600
[ 2.980635] [<800dba04>] (vfs_kern_mount) from [<800de720>] (do_mount+0x19c/0x9b4)
[ 3.000129] r9:00000060 r8:87b589c0 r7:87b58a00 r6:807a9658 r5:00000000 r4:807b13e8
[ 3.020237] [<800de584>] (do_mount) from [<800df274>] (SyS_mount+0x7c/0xa8)
[ 3.033423] r10:87ba7000 r9:807962b8 r8:00008001 r7:806c83f0 r6:00000000 r5:87b58a00
[ 3.053626] r4:87b589c0
[ 3.062280] [<800df1f8>] (SyS_mount) from [<8076b1f4>] (mount_block_root+0x144/0x270)
[ 3.082062] r8:87de94e0 r7:87ba7000 r6:807962a8 r5:87ba7000 r4:00008001
[ 3.095233] [<8076b0b0>] (mount_block_root) from [<8076b4e8>] (prepare_namespace+0xb0/0x1a4)
[ 3.115944] r10:80796284 r9:8076a5ec r8:00000097 r7:807d24c0 r6:807d24c0 r5:807962b8
[ 3.136353] r4:807962a8
[ 3.144950] [<8076b438>] (prepare_namespace) from [<8076ae9c>] (kernel_init_freeable+0x1bc/0x1d0)
[ 3.166110] r5:00000008 r4:8079ec3c
[ 3.175907] [<8076ace0>] (kernel_init_freeable) from [<80594f30>] (kernel_init+0x18/0xf0)
[ 3.196270] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80594f18
[ 3.216825] r4:807d24c0
[ 3.225507] [<80594f18>] (kernel_init) from [<8000f668>] (ret_from_fork+0x14/0x2c)
[ 3.245180] r5:80594f18 r4:00000000
[ 3.258206] List of all partitions:
[ 3.267753] No filesystem could mount root, tried: ubifs
[ 3.279225] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 3.298764] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
>
> Thanks,
> //richard
>
Best regards,
Bhuvan
next prev parent reply other threads:[~2015-07-14 8:29 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 13:55 UBIFS errors when file-system is full Bhuvanchandra DV
2015-07-13 14:09 ` Richard Weinberger
2015-07-14 4:23 ` Bhuvanchandra DV
2015-07-14 6:13 ` Richard Weinberger
2015-07-14 6:30 ` Bhuvanchandra DV
2015-07-14 6:32 ` Richard Weinberger
2015-07-14 8:29 ` Bhuvanchandra DV [this message]
2015-07-14 8:42 ` Richard Weinberger
2015-07-14 10:08 ` Bhuvanchandra DV
2015-07-14 11:06 ` Richard Weinberger
[not found] ` <55A74812.2020906@gmail.com>
2015-07-16 7:35 ` Fwd: " Bhuvanchandra DV
[not found] ` <55A74AA1.2000000@nod.at>
[not found] ` <55A7540C.3050900@nod.at>
[not found] ` <55A7592D.6010906@gmail.com>
[not found] ` <55A75A05.7040603@nod.at>
2015-07-16 7:33 ` Bhuvanchandra DV
2015-07-21 6:04 ` Bhuvanchandra DV
2015-07-21 6:14 ` Richard Weinberger
2015-07-22 7:10 ` Bhuvanchandra DV
2015-07-22 7:20 ` Richard Weinberger
2015-07-24 14:43 ` Bhuvanchandra DV
2015-07-24 16:51 ` Richard Weinberger
2015-07-31 16:47 ` Bhuvanchandra DV
2015-08-01 6:36 ` Richard Weinberger
2015-08-06 10:31 ` Bhuvanchandra DV
2015-08-07 12:37 ` Richard Weinberger
2015-08-12 7:01 ` Stefan Agner
2015-08-12 7:27 ` Richard Weinberger
2015-09-01 0:45 ` Stefan Agner
2015-09-01 1:43 ` Brian Norris
2015-09-01 2:20 ` Stefan Agner
2015-09-02 19:58 ` Stefan Agner
2015-09-02 20:13 ` Brian Norris
2015-09-02 20:41 ` Stefan Agner
2015-09-07 13:47 ` Bhuvanchandra
2015-09-11 4:03 ` Bhuvanchandra
2015-09-12 9:39 ` Richard Weinberger
2015-09-13 4:45 ` Bhuvanchandra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55A4C866.2010400@gmail.com \
--to=bhuvanchandradv@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.