From: Bhuvanchandra <bhuvanchandradv@gmail.com>
To: Richard Weinberger <richard@nod.at>,
Bhuvanchandra <bhuvanchandradv@gmail.com>
Cc: linux-mtd@lists.infradead.org, Stefan Agner <stefan@agner.ch>
Subject: Re: UBIFS errors when file-system is full
Date: Sun, 13 Sep 2015 10:15:10 +0530 [thread overview]
Message-ID: <55F4FF56.7000107@gmail.com> (raw)
In-Reply-To: <55F3F2BE.8090207@nod.at>
On 09/12/2015 03:09 PM, Richard Weinberger wrote:
> Hi!
>
> Am 11.09.2015 um 06:03 schrieb Bhuvanchandra:
>>> Running mkvol_bad /dev/ubi0
>>> [ 99.630756] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 99.637579] Volume creation request dump:
>>> [ 99.641987] vol_id -2
>>> [ 99.644784] alignment 1
>>> [ 99.647466] bytes 124690432
>>> [ 99.650994] vol_type 3
>>> [ 99.653696] name_len 22
>>> [ 99.656464] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 99.669464] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 99.676292] Volume creation request dump:
>>> [ 99.680674] vol_id 128
>>> [ 99.683558] alignment 1
>>> [ 99.686240] bytes 124690432
>>> [ 99.694911] vol_type 3
>>> [ 99.702852] name_len 22
>>> [ 99.710786] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 99.728668] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 99.740962] Volume creation request dump:
>>> [ 99.750630] vol_id 0
>>> [ 99.758537] alignment 0
>>> [ 99.766352] bytes 124690432
>>> [ 99.774804] vol_type 3
>>> [ 99.782409] name_len 22
>>> [ 99.789923] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 99.808480] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 99.820028] Volume creation request dump:
>>> [ 99.828796] vol_id 0
>>> [ 99.835879] alignment -1
>>> [ 99.842859] bytes 124690432
>>> [ 99.850335] vol_type 3
>>> [ 99.856849] name_len 22
>>> [ 99.863395] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 99.880157] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 99.891064] Volume creation request dump:
>>> [ 99.899440] vol_id 0
>>> [ 99.906182] alignment 126977
>>> [ 99.913456] bytes 124690432
>>> [ 99.920926] vol_type 3
>>> [ 99.927467] name_len 22
>>> [ 99.934058] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 99.950732] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 99.961655] Volume creation request dump:
>>> [ 99.970057] vol_id 0
>>> [ 99.976826] alignment 2049
>>> [ 99.983931] bytes 124690432
>>> [ 99.991412] vol_type 3
>>> [ 99.997959] name_len 22
>>> [ 100.004551] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 100.021254] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 100.032201] Volume creation request dump:
>>> [ 100.040649] vol_id 0
>>> [ 100.047441] alignment 1
>>> [ 100.054334] bytes -1
>>> [ 100.061191] vol_type 3
>>> [ 100.067708] name_len 22
>>> [ 100.074250] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 100.090929] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 100.101834] Volume creation request dump:
>>> [ 100.110223] vol_id 0
>>> [ 100.116969] alignment 1
>>> [ 100.123783] bytes 0
>>> [ 100.130505] vol_type 3
>>> [ 100.136980] name_len 22
>>> [ 100.143502] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 100.160274] ubi0 error: ubi_create_volume: not enough PEBs, only 982 available
>>> [ 100.175970] ubi0 error: ubi_create_volume: cannot create volume 0, error -28
>>> [ 100.189501] ubi0 error: ubi_create_volume: not enough PEBs, only 982 available
>>> [ 100.205998] ubi0 error: ubi_create_volume: cannot create volume 0, error -28
>>> [ 100.222091] ubi0 error: verify_mkvol_req: bad volume creation request
>>> [ 100.233529] Volume creation request dump:
>>> [ 100.242409] vol_id 0
>>> [ 100.249771] alignment 1
>>> [ 100.256993] bytes 126976
>>> [ 100.264716] vol_type 7
>>> [ 100.272035] name_len 22
>>> [ 100.279316] 1st 16 characters of name: mkvol_bad:test_m
>>> [ 100.416661] ubi0 error: ubi_create_volume: volume 0 already exists
>>> [ 100.427776] ubi0 error: ubi_create_volume: cannot create volume 0, error -17
>>> [ 100.441410] ubi0 error: ubi_create_volume: volume "mkvol_bad:test_mkvol()" exists (ID 0)
>>> [ 100.459295] ubi0 error: ubi_create_volume: cannot create volume 1, error -17
>>> [ 100.711027] ubi0 error: ubi_create_volume: volume "mkvol_bad:test_mkvol()" exists (ID 0)
>>> [ 100.729733] ubi0 error: ubi_create_volume: cannot create volume 1, error -17
>>> [ 131.225291] ubi0 error: ubi_open_volume: cannot open device 0, volume 128, error -22
>>> [ 131.244295] ubi0 error: ubi_open_volume: cannot open device 0, volume -1, error -22
>>> [ 131.269510] ubi0 error: ubi_open_volume: cannot open device 0, volume 128, error -22
>>> [ 131.290092] ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -19
>>> [ 131.551660] ubi0 error: ubi_open_volume: cannot open device 0, volume 0, error -19
>> With the recent fixes by Stefan to vf610_nfc driver the io_paral test passed, but the
>> above error's with the volume creation are still reproducible. Are these erros need to
>> be taken into consideration ?
> No. These logs are fine. mkvol_bad does negative testing.
Thanks! for the confirmation.
Best regards,
Bhuvan
>
> Thanks,
> //richard
next prev parent reply other threads:[~2015-09-13 4:45 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 13:55 UBIFS errors when file-system is full Bhuvanchandra DV
2015-07-13 14:09 ` Richard Weinberger
2015-07-14 4:23 ` Bhuvanchandra DV
2015-07-14 6:13 ` Richard Weinberger
2015-07-14 6:30 ` Bhuvanchandra DV
2015-07-14 6:32 ` Richard Weinberger
2015-07-14 8:29 ` Bhuvanchandra DV
2015-07-14 8:42 ` Richard Weinberger
2015-07-14 10:08 ` Bhuvanchandra DV
2015-07-14 11:06 ` Richard Weinberger
[not found] ` <55A74812.2020906@gmail.com>
[not found] ` <55A74AA1.2000000@nod.at>
[not found] ` <55A7540C.3050900@nod.at>
[not found] ` <55A7592D.6010906@gmail.com>
[not found] ` <55A75A05.7040603@nod.at>
2015-07-16 7:33 ` Bhuvanchandra DV
2015-07-21 6:04 ` Bhuvanchandra DV
2015-07-21 6:14 ` Richard Weinberger
2015-07-22 7:10 ` Bhuvanchandra DV
2015-07-22 7:20 ` Richard Weinberger
2015-07-24 14:43 ` Bhuvanchandra DV
2015-07-24 16:51 ` Richard Weinberger
2015-07-31 16:47 ` Bhuvanchandra DV
2015-08-01 6:36 ` Richard Weinberger
2015-08-06 10:31 ` Bhuvanchandra DV
2015-08-07 12:37 ` Richard Weinberger
2015-08-12 7:01 ` Stefan Agner
2015-08-12 7:27 ` Richard Weinberger
2015-09-01 0:45 ` Stefan Agner
2015-09-01 1:43 ` Brian Norris
2015-09-01 2:20 ` Stefan Agner
2015-09-02 19:58 ` Stefan Agner
2015-09-02 20:13 ` Brian Norris
2015-09-02 20:41 ` Stefan Agner
2015-09-07 13:47 ` Bhuvanchandra
2015-09-11 4:03 ` Bhuvanchandra
2015-09-12 9:39 ` Richard Weinberger
2015-09-13 4:45 ` Bhuvanchandra [this message]
2015-07-16 7:35 ` Fwd: " Bhuvanchandra DV
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55F4FF56.7000107@gmail.com \
--to=bhuvanchandradv@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.