From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Anand Moon <linux.amoon@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFCv1 8/8] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
Date: Fri, 18 Jun 2021 00:26:51 +0200 [thread overview]
Message-ID: <CAFBinCCS6mzukqgnJijn2khaaOAPb_mg+zAqYxpUb57297C6Tg@mail.gmail.com> (raw)
In-Reply-To: <20210617194154.2397-9-linux.amoon@gmail.com>
On Thu, Jun 17, 2021 at 9:44 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> devm_phy_create can return -EPROBE_DEFER if the phy-supply is not ready
> yet. Silence this warning as the driver framework will re-attempt
> registering the PHY. Use dev_err_probe() for phy resources to indicate
> the deferral reason when waiting for the resource to come up.
This is a good improvement - thank you!
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Anand Moon <linux.amoon@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFCv1 8/8] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
Date: Fri, 18 Jun 2021 00:26:51 +0200 [thread overview]
Message-ID: <CAFBinCCS6mzukqgnJijn2khaaOAPb_mg+zAqYxpUb57297C6Tg@mail.gmail.com> (raw)
In-Reply-To: <20210617194154.2397-9-linux.amoon@gmail.com>
On Thu, Jun 17, 2021 at 9:44 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> devm_phy_create can return -EPROBE_DEFER if the phy-supply is not ready
> yet. Silence this warning as the driver framework will re-attempt
> registering the PHY. Use dev_err_probe() for phy resources to indicate
> the deferral reason when waiting for the resource to come up.
This is a good improvement - thank you!
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Anand Moon <linux.amoon@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFCv1 8/8] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
Date: Fri, 18 Jun 2021 00:26:51 +0200 [thread overview]
Message-ID: <CAFBinCCS6mzukqgnJijn2khaaOAPb_mg+zAqYxpUb57297C6Tg@mail.gmail.com> (raw)
In-Reply-To: <20210617194154.2397-9-linux.amoon@gmail.com>
On Thu, Jun 17, 2021 at 9:44 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> devm_phy_create can return -EPROBE_DEFER if the phy-supply is not ready
> yet. Silence this warning as the driver framework will re-attempt
> registering the PHY. Use dev_err_probe() for phy resources to indicate
> the deferral reason when waiting for the resource to come up.
This is a good improvement - thank you!
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: Anand Moon <linux.amoon@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFCv1 8/8] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
Date: Fri, 18 Jun 2021 00:26:51 +0200 [thread overview]
Message-ID: <CAFBinCCS6mzukqgnJijn2khaaOAPb_mg+zAqYxpUb57297C6Tg@mail.gmail.com> (raw)
In-Reply-To: <20210617194154.2397-9-linux.amoon@gmail.com>
On Thu, Jun 17, 2021 at 9:44 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> devm_phy_create can return -EPROBE_DEFER if the phy-supply is not ready
> yet. Silence this warning as the driver framework will re-attempt
> registering the PHY. Use dev_err_probe() for phy resources to indicate
> the deferral reason when waiting for the resource to come up.
This is a good improvement - thank you!
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-17 22:27 UTC|newest]
Thread overview: 149+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-17 19:41 [RFCv1 0/8] Meson-8b and Meson-gxbb USB phy code re-structure Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` [RFCv1 1/8] phy: amlogic: meson8b-usb2: Use clock bulk to get clocks for phy Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 22:33 ` Martin Blumenstingl
2021-06-17 22:33 ` Martin Blumenstingl
2021-06-17 22:33 ` Martin Blumenstingl
2021-06-17 22:33 ` Martin Blumenstingl
2021-06-18 15:32 ` Anand Moon
2021-06-18 15:32 ` Anand Moon
2021-06-18 15:32 ` Anand Moon
2021-06-18 15:32 ` Anand Moon
2021-06-17 19:41 ` [RFCv1 2/8] phy: amlogic: meson8b-usb2: Use phy init callback function Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-18 12:26 ` Martin Blumenstingl
2021-06-18 12:26 ` Martin Blumenstingl
2021-06-18 12:26 ` Martin Blumenstingl
2021-06-18 12:26 ` Martin Blumenstingl
2021-06-18 13:17 ` Anand Moon
2021-06-18 13:17 ` Anand Moon
2021-06-18 13:17 ` Anand Moon
2021-06-18 13:17 ` Anand Moon
2021-06-17 19:41 ` [RFCv1 3/8] phy: amlogic: meson8b-usb2: Use phy exit " Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` [RFCv1 4/8] phy: amlogic: meson8b-usb2: Use phy set_mode " Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-18 13:19 ` Anand Moon
2021-06-18 13:19 ` Anand Moon
2021-06-18 13:19 ` Anand Moon
2021-06-18 13:19 ` Anand Moon
2021-06-18 20:01 ` Martin Blumenstingl
2021-06-18 20:01 ` Martin Blumenstingl
2021-06-18 20:01 ` Martin Blumenstingl
2021-06-18 20:01 ` Martin Blumenstingl
2021-06-21 7:20 ` Anand Moon
2021-06-21 7:20 ` Anand Moon
2021-06-21 7:20 ` Anand Moon
2021-06-21 7:20 ` Anand Moon
2021-06-22 20:27 ` Martin Blumenstingl
2021-06-22 20:27 ` Martin Blumenstingl
2021-06-22 20:27 ` Martin Blumenstingl
2021-06-22 20:27 ` Martin Blumenstingl
2021-06-17 19:41 ` [RFCv1 5/8] phy: amlogic: meson8b-usb2: Reorder phy poweroff " Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-17 22:16 ` Martin Blumenstingl
2021-06-18 15:33 ` Anand Moon
2021-06-18 15:33 ` Anand Moon
2021-06-18 15:33 ` Anand Moon
2021-06-18 15:33 ` Anand Moon
2021-06-18 0:34 ` kernel test robot
2021-06-17 19:41 ` [RFCv1 6/8] phy: amlogic: meson8b-usb2: Use phy reset " Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 22:24 ` Martin Blumenstingl
2021-06-17 22:24 ` Martin Blumenstingl
2021-06-17 22:24 ` Martin Blumenstingl
2021-06-17 22:24 ` Martin Blumenstingl
2021-06-18 15:33 ` Anand Moon
2021-06-18 15:33 ` Anand Moon
2021-06-18 15:33 ` Anand Moon
2021-06-18 15:33 ` Anand Moon
2021-06-18 20:06 ` Martin Blumenstingl
2021-06-18 20:06 ` Martin Blumenstingl
2021-06-18 20:06 ` Martin Blumenstingl
2021-06-18 20:06 ` Martin Blumenstingl
2021-06-21 7:15 ` Anand Moon
2021-06-21 7:15 ` Anand Moon
2021-06-21 7:15 ` Anand Moon
2021-06-21 7:15 ` Anand Moon
2021-06-22 20:11 ` Martin Blumenstingl
2021-06-22 20:11 ` Martin Blumenstingl
2021-06-22 20:11 ` Martin Blumenstingl
2021-06-22 20:11 ` Martin Blumenstingl
2021-06-24 14:54 ` Anand Moon
2021-06-24 14:54 ` Anand Moon
2021-06-24 14:54 ` Anand Moon
2021-06-24 14:54 ` Anand Moon
2021-06-27 20:07 ` Anand Moon
2021-06-27 20:07 ` Anand Moon
2021-06-27 20:07 ` Anand Moon
2021-06-27 20:07 ` Anand Moon
2021-06-27 20:25 ` Martin Blumenstingl
2021-06-27 20:25 ` Martin Blumenstingl
2021-06-27 20:25 ` Martin Blumenstingl
2021-06-27 20:25 ` Martin Blumenstingl
2021-07-02 19:13 ` Anand Moon
2021-07-02 19:13 ` Anand Moon
2021-07-02 19:13 ` Anand Moon
2021-07-02 19:13 ` Anand Moon
2021-06-17 19:41 ` [RFCv1 7/8] phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 22:37 ` Martin Blumenstingl
2021-06-17 22:37 ` Martin Blumenstingl
2021-06-17 22:37 ` Martin Blumenstingl
2021-06-17 22:37 ` Martin Blumenstingl
2021-06-21 7:15 ` Anand Moon
2021-06-21 7:15 ` Anand Moon
2021-06-21 7:15 ` Anand Moon
2021-06-21 7:15 ` Anand Moon
2021-06-22 20:00 ` Martin Blumenstingl
2021-06-22 20:00 ` Martin Blumenstingl
2021-06-22 20:00 ` Martin Blumenstingl
2021-06-22 20:00 ` Martin Blumenstingl
2021-06-17 19:41 ` [RFCv1 8/8] phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 19:41 ` Anand Moon
2021-06-17 22:26 ` Martin Blumenstingl [this message]
2021-06-17 22:26 ` Martin Blumenstingl
2021-06-17 22:26 ` Martin Blumenstingl
2021-06-17 22:26 ` Martin Blumenstingl
2021-06-17 22:11 ` [RFCv1 0/8] Meson-8b and Meson-gxbb USB phy code re-structure Martin Blumenstingl
2021-06-17 22:11 ` Martin Blumenstingl
2021-06-17 22:11 ` Martin Blumenstingl
2021-06-17 22:11 ` Martin Blumenstingl
2021-06-18 13:20 ` Anand Moon
2021-06-18 13:20 ` Anand Moon
2021-06-18 13:20 ` Anand Moon
2021-06-18 13:20 ` Anand Moon
2021-06-18 20:16 ` Martin Blumenstingl
2021-06-18 20:16 ` Martin Blumenstingl
2021-06-18 20:16 ` Martin Blumenstingl
2021-06-18 20:16 ` Martin Blumenstingl
2021-06-21 7:21 ` Anand Moon
2021-06-21 7:21 ` Anand Moon
2021-06-21 7:21 ` Anand Moon
2021-06-21 7:21 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAFBinCCS6mzukqgnJijn2khaaOAPb_mg+zAqYxpUb57297C6Tg@mail.gmail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=kishon@ti.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux.amoon@gmail.com \
--cc=narmstrong@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.