Re: [PATCH 0/2] Set PHY address of MT7531 switch to 0x1f on MediaTek arm64 boards

From: arinc.unal@arinc9.com
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>
Cc: mithat.guner@xeront.com, erkin.bozoglu@xeront.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: Re: [PATCH 0/2] Set PHY address of MT7531 switch to 0x1f on MediaTek arm64 boards
Date: Sun, 31 Mar 2024 12:28:08 +0300	[thread overview]
Message-ID: <ff196055-ecd8-4563-bc01-ff2533a07109@arinc9.com> (raw)
In-Reply-To: <20240314-for-mediatek-mt7531-phy-address-v1-0-52f58db01acd@arinc9.com>

On 14.03.2024 15:20, Arınç ÜNAL via B4 Relay wrote:
> Hello.
> 
> This is a small patch series setting the PHY address of MT7531 to 0x1f 
> on
> all boards that have the switch.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
> Arınç ÜNAL (2):
>        arm64: dts: mediatek: mt7622: set PHY address of MT7531 switch 
> to 0x1f
>        arm64: dts: mediatek: mt7986: set PHY address of MT7531 switch 
> to 0x1f
> 
>   arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts             | 4 ++--
>   arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts             | 4 ++--
>   5 files changed, 10 insertions(+), 10 deletions(-)
> ---
> base-commit: ba90af39ba57b3fe3ecfdba0c87a80d20c7b788d
> change-id: 20240314-for-mediatek-mt7531-phy-address-9d0b4cfeca21
> 
> Best regards,

Reminder that this patch series is waiting.

Arınç