From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Mathias Nyman <mathias.nyman@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Felipe Balbi <balbi@ti.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Roger Quadros <rogerq@ti.com>, <linux-usb@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>
Subject: [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 8 Jul 2015 17:41:07 +0800 [thread overview]
Message-ID: <1436348468-4126-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1436348468-4126-1-git-send-email-chunfeng.yun@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 +++++++++++++++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..cb63dc3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
@@ -32,6 +33,15 @@
};
chosen { };
+
+ usb_p1_vbus: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&pwrap {
@@ -211,3 +221,8 @@
&uart0 {
status = "okay";
};
+
+&usb {
+ reg-vusb33-supply = <&mt6397_vusb_reg>;
+ reg-vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..452bd0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/mt8173-resets.h>
+#include <dt-bindings/power/mt8173-power.h>
#include "mt8173-pinfunc.h"
/ {
@@ -393,6 +394,32 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb: usb30@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ usb-phy = <&u3phy>;
+ usb3-lpm-capable;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>;
+ clock-names = "sys_mac";
+ };
+
+ u3phy: usb-phy@11271000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0 0x11271000 0 0x3000>,
+ <0 0x11280000 0 0x20000>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ usb-wakeup-ctrl = <&pericfg>;
+ wakeup-src = <1>;
+ u2port-num = <2>;
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>,
+ <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "wakeup_deb_p0",
+ "wakeup_deb_p1",
+ "u3phya_ref";
+ };
};
};
--
1.8.1.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Mathias Nyman <mathias.nyman-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>,
Chunfeng Yun
<chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
Subject: [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 8 Jul 2015 17:41:07 +0800 [thread overview]
Message-ID: <1436348468-4126-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1436348468-4126-1-git-send-email-chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 +++++++++++++++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..cb63dc3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
@@ -32,6 +33,15 @@
};
chosen { };
+
+ usb_p1_vbus: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&pwrap {
@@ -211,3 +221,8 @@
&uart0 {
status = "okay";
};
+
+&usb {
+ reg-vusb33-supply = <&mt6397_vusb_reg>;
+ reg-vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..452bd0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/mt8173-resets.h>
+#include <dt-bindings/power/mt8173-power.h>
#include "mt8173-pinfunc.h"
/ {
@@ -393,6 +394,32 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb: usb30@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ usb-phy = <&u3phy>;
+ usb3-lpm-capable;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>;
+ clock-names = "sys_mac";
+ };
+
+ u3phy: usb-phy@11271000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0 0x11271000 0 0x3000>,
+ <0 0x11280000 0 0x20000>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ usb-wakeup-ctrl = <&pericfg>;
+ wakeup-src = <1>;
+ u2port-num = <2>;
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>,
+ <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "wakeup_deb_p0",
+ "wakeup_deb_p1",
+ "u3phya_ref";
+ };
};
};
--
1.8.1.1.dirty
WARNING: multiple messages have this Message-ID (diff)
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173
Date: Wed, 8 Jul 2015 17:41:07 +0800 [thread overview]
Message-ID: <1436348468-4126-6-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1436348468-4126-1-git-send-email-chunfeng.yun@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 15 +++++++++++++++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..cb63dc3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
@@ -32,6 +33,15 @@
};
chosen { };
+
+ usb_p1_vbus: fixedregulator at 0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&pwrap {
@@ -211,3 +221,8 @@
&uart0 {
status = "okay";
};
+
+&usb {
+ reg-vusb33-supply = <&mt6397_vusb_reg>;
+ reg-vbus-supply = <&usb_p1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..452bd0a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/mt8173-resets.h>
+#include <dt-bindings/power/mt8173-power.h>
#include "mt8173-pinfunc.h"
/ {
@@ -393,6 +394,32 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb: usb30 at 11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ usb-phy = <&u3phy>;
+ usb3-lpm-capable;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>;
+ clock-names = "sys_mac";
+ };
+
+ u3phy: usb-phy at 11271000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0 0x11271000 0 0x3000>,
+ <0 0x11280000 0 0x20000>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ usb-wakeup-ctrl = <&pericfg>;
+ wakeup-src = <1>;
+ u2port-num = <2>;
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>,
+ <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "wakeup_deb_p0",
+ "wakeup_deb_p1",
+ "u3phya_ref";
+ };
};
};
--
1.8.1.1.dirty
next prev parent reply other threads:[~2015-07-08 9:42 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 9:41 [PATCH v2 0/5] Mediatek xHCI support Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-08 9:41 ` [PATCH v2 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-10 5:10 ` Sascha Hauer
2015-07-10 5:10 ` Sascha Hauer
2015-07-10 5:10 ` Sascha Hauer
2015-07-14 6:19 ` chunfeng yun
2015-07-14 6:19 ` chunfeng yun
2015-07-14 6:19 ` chunfeng yun
2015-07-14 7:45 ` Sascha Hauer
2015-07-14 7:45 ` Sascha Hauer
2015-07-14 7:45 ` Sascha Hauer
2015-07-15 12:33 ` chunfeng yun
2015-07-15 12:33 ` chunfeng yun
2015-07-15 12:33 ` chunfeng yun
2015-07-08 9:41 ` [PATCH v2 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-10 8:31 ` Roger Quadros
2015-07-10 8:31 ` Roger Quadros
2015-07-10 8:31 ` Roger Quadros
2015-07-14 2:36 ` chunfeng yun
2015-07-14 2:36 ` chunfeng yun
2015-07-14 2:36 ` chunfeng yun
2015-07-14 2:50 ` chunfeng yun
2015-07-14 2:50 ` chunfeng yun
2015-07-14 2:50 ` chunfeng yun
2015-07-20 14:24 ` chunfeng yun
2015-07-20 14:24 ` chunfeng yun
2015-07-20 14:24 ` chunfeng yun
2015-07-08 9:41 ` [PATCH v2 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-10 6:42 ` Sascha Hauer
2015-07-10 6:42 ` Sascha Hauer
2015-07-10 6:42 ` Sascha Hauer
2015-07-20 15:41 ` chunfeng yun
2015-07-20 15:41 ` chunfeng yun
2015-07-20 15:41 ` chunfeng yun
2015-07-08 9:41 ` [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-13 14:52 ` John Crispin
2015-07-13 14:52 ` John Crispin
2015-07-13 14:52 ` John Crispin
2015-07-20 14:51 ` chunfeng yun
2015-07-20 14:51 ` chunfeng yun
2015-07-20 14:51 ` chunfeng yun
2015-07-08 9:41 ` Chunfeng Yun [this message]
2015-07-08 9:41 ` [PATCH v2 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Chunfeng Yun
2015-07-08 9:41 ` Chunfeng Yun
2015-07-14 10:12 ` Daniel Kurtz
2015-07-14 10:12 ` Daniel Kurtz
2015-07-20 14:39 ` chunfeng yun
2015-07-20 14:39 ` chunfeng yun
2015-07-20 14:39 ` chunfeng yun
2015-07-20 14:51 ` Yingjoe Chen
2015-07-20 14:51 ` Yingjoe Chen
2015-07-20 14:51 ` Yingjoe Chen
2015-07-20 14:59 ` Daniel Kurtz
2015-07-20 14:59 ` Daniel Kurtz
2015-07-20 14:59 ` Daniel Kurtz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436348468-4126-6-git-send-email-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathias.nyman@intel.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=rogerq@ti.com \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.