From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Date: Mon, 15 Jun 2015 21:19:56 +0530 [thread overview] Message-ID: <1434383399-2370-10-git-send-email-vaibhav.hiremath@linaro.org> (raw) In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath@linaro.org> Driver now supports enable/disable across msg xfer, which user can control it by new DT property - i2c-disable-after-xfer : If set, driver will disable I2C module after msg xfer and enable it back before xfer. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> --- Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt index 12b78ac..9657db5 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt @@ -18,6 +18,11 @@ Recommended properties : status register of i2c controller instead. - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. +Optional properties : + + - i2c-disable-after-xfer : If set, driver will disable I2C module + after msg xfer and enable it again before xfer. + Examples: twsi1: i2c at d4011000 { compatible = "mrvl,mmp-twsi"; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org, robert.jarzmik-GANU6spQydw@public.gmane.org, Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Subject: [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Date: Mon, 15 Jun 2015 21:19:56 +0530 [thread overview] Message-ID: <1434383399-2370-10-git-send-email-vaibhav.hiremath@linaro.org> (raw) In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Driver now supports enable/disable across msg xfer, which user can control it by new DT property - i2c-disable-after-xfer : If set, driver will disable I2C module after msg xfer and enable it back before xfer. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt index 12b78ac..9657db5 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-pxa.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.txt @@ -18,6 +18,11 @@ Recommended properties : status register of i2c controller instead. - mrvl,i2c-fast-mode : Enable fast mode of i2c controller. +Optional properties : + + - i2c-disable-after-xfer : If set, driver will disable I2C module + after msg xfer and enable it again before xfer. + Examples: twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi"; -- 1.9.1
next prev parent reply other threads:[~2015-06-15 15:49 UTC|newest] Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <vaibhav.hiremath@linaro.org> 2015-06-02 18:45 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-02 18:45 ` [PATCH-RESEND 1/3] i2c: core: append hardware lock with bus lock Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-02 18:45 ` [PATCH-RESEND 2/3] i2c: pxa: Add support for hardware lock Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-02 18:45 ` [PATCH-RESEND 3/3] i2c: pxa: Add pin ctrl support for CP core access Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-16 8:28 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath 2015-06-16 8:28 ` Vaibhav Hiremath 2015-07-07 6:43 ` Vaibhav Hiremath 2015-07-07 6:43 ` Vaibhav Hiremath 2015-10-25 9:52 ` Wolfram Sang 2015-10-25 9:52 ` Wolfram Sang 2015-06-15 15:49 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 01/12] i2c: pxa: keep i2c irq ON in suspend Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 20:58 ` Robert Jarzmik 2015-07-03 20:58 ` Robert Jarzmik 2015-06-15 15:49 ` [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-16 5:31 ` Shubhrajyoti Datta 2015-06-16 5:31 ` Shubhrajyoti Datta 2015-06-16 7:41 ` Vaibhav Hiremath 2015-06-16 7:41 ` Vaibhav Hiremath 2015-07-03 21:07 ` Robert Jarzmik 2015-07-03 21:07 ` Robert Jarzmik 2015-06-15 15:49 ` [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and " Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 15:27 ` Robert Jarzmik 2015-07-03 15:27 ` Robert Jarzmik 2015-07-03 18:13 ` Vaibhav Hiremath 2015-07-03 18:13 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 05/12] i2c: pxa: Remove compile warnning in 64bit mode Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 06/12] i2c: pxa: Update debug function to dump more info on error Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 18:14 ` Vaibhav Hiremath 2015-07-03 18:14 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 18:23 ` Vaibhav Hiremath 2015-07-03 18:23 ` Vaibhav Hiremath 2015-07-03 18:48 ` Vaibhav Hiremath 2015-07-03 18:48 ` Vaibhav Hiremath 2015-07-03 19:44 ` Robert Jarzmik 2015-07-03 19:44 ` Robert Jarzmik 2015-06-15 15:49 ` Vaibhav Hiremath [this message] 2015-06-15 15:49 ` [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 10/12] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 18:17 ` Vaibhav Hiremath 2015-07-03 18:17 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-16 13:22 ` Rob Herring 2015-06-16 13:22 ` Rob Herring 2015-06-16 14:25 ` Vaibhav Hiremath 2015-06-16 14:25 ` Vaibhav Hiremath 2015-06-29 8:52 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath 2015-06-29 8:52 ` Vaibhav Hiremath 2015-07-02 16:54 ` Vaibhav Hiremath 2015-07-02 16:54 ` Vaibhav Hiremath 2015-06-17 18:58 [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2 1/3] mfd: 88pm800: Add device " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2] rtc: 88pm80x: add " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-20 0:43 ` Alexandre Belloni 2015-06-20 0:43 ` Alexandre Belloni 2015-06-20 0:43 ` Alexandre Belloni 2015-06-20 0:43 ` Alexandre Belloni 2015-06-25 7:46 ` Vaibhav Hiremath 2015-06-25 7:46 ` Vaibhav Hiremath 2015-06-25 7:46 ` Vaibhav Hiremath 2015-06-25 7:46 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-23 15:37 ` Rob Herring 2015-06-23 15:37 ` Rob Herring 2015-06-23 15:37 ` [rtc-linux] " Rob Herring 2015-06-23 15:37 ` Rob Herring 2015-06-23 17:02 ` Vaibhav Hiremath 2015-06-23 17:02 ` Vaibhav Hiremath 2015-06-23 17:02 ` [rtc-linux] " Vaibhav Hiremath 2015-06-24 0:29 ` Krzysztof Kozlowski 2015-06-24 0:29 ` Krzysztof Kozlowski 2015-06-24 0:29 ` [rtc-linux] " Krzysztof Kozlowski 2015-06-24 0:29 ` Krzysztof Kozlowski 2015-06-24 5:19 ` Vaibhav Hiremath 2015-06-24 5:19 ` Vaibhav Hiremath 2015-06-24 5:19 ` [rtc-linux] " Vaibhav Hiremath 2015-06-24 5:19 ` Vaibhav Hiremath 2015-06-23 5:07 ` [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath 2015-06-23 5:07 ` Vaibhav Hiremath 2015-06-23 5:07 ` [rtc-linux] " Vaibhav Hiremath 2015-06-23 5:07 ` Vaibhav Hiremath
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1434383399-2370-10-git-send-email-vaibhav.hiremath@linaro.org \ --to=vaibhav.hiremath@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.