From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family
Date: Mon, 29 Jun 2015 14:22:17 +0530 [thread overview]
Message-ID: <55910741.9020106@linaro.org> (raw)
In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath@linaro.org>
On Monday 15 June 2015 09:19 PM, Vaibhav Hiremath wrote:
> This patch series fixes bugs/warnings, cleans up the code and adds
> support for PXA910 family of devices to PXA I2C bus driver.
>
> There has been one attempt made sometime back in 2012 to upstream
> some of the patches from below list, but did not get follow up later.
> I have consolidated all the patches, cleaned them up, splited into
> logical changes, added new patches and submitting it now.
>
> I tried to maintain authorship & Signoff except where I did some
> significant changes to the code/logic.
>
> Link to previous post:
> http://permalink.gmane.org/gmane.linux.drivers.i2c/13557
>
> Testing:
> - Basic testing on PMIC device on I2C-0 interface
> - Boot tested on platform based on PXA1928
> - Probe is successfully passing
> - Read few registers of PMIC (RTC, ID, etc...) during boot
>
>
> V1 => V2:
> ========
Ping !!!
Thanks,
Vaibhav
> Link to V1 - http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/347012.html
>
> - Fixed all comments from "Robert Jarzmik" and "Wolfram Sang"
> - Dropped Patch
> 05/12: using core bus reset implementation - under work.
> Will submit shortly.
> 08/12: NAKed and dropped
> - Seperated DT binding patch from driver changes, for easy merge
>
>
> Leilei Shang (1):
> i2c: pxa: keep i2c irq ON in suspend
>
> Shouming Wang (1):
> i2c: pxa: Return I2C_RETRY when timeout in pio mode
>
> Vaibhav Hiremath (8):
> i2c: pxa: No need to set slave addr for i2c master mode reset
> i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
> i2c: pxa: Update debug function to dump more info on error
> i2c:pxa: Use devm_ variants in probe function
> Documentation: binding: add new property 'disable_after_xfer' to
> i2c-pxa
> i2c: pxa: Add support for pxa910/988 & new configuration features
> i2c: pxa: Add ILCR (tLow & tHigh) configuration support
> Documentation: binding: add sclk adjustment properties to i2c-pxa
>
> Yi Zhang (1):
> i2c: pxa: enable/disable i2c module across msg xfer
>
> Yipeng Yao (1):
> i2c: pxa: Remove compile warnning in 64bit mode
>
> Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 18 ++
> drivers/i2c/busses/i2c-pxa.c | 267 ++++++++++++++++------
> 2 files changed, 220 insertions(+), 65 deletions(-)
>
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
robert.jarzmik-GANU6spQydw@public.gmane.org
Subject: Re: [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family
Date: Mon, 29 Jun 2015 14:22:17 +0530 [thread overview]
Message-ID: <55910741.9020106@linaro.org> (raw)
In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Monday 15 June 2015 09:19 PM, Vaibhav Hiremath wrote:
> This patch series fixes bugs/warnings, cleans up the code and adds
> support for PXA910 family of devices to PXA I2C bus driver.
>
> There has been one attempt made sometime back in 2012 to upstream
> some of the patches from below list, but did not get follow up later.
> I have consolidated all the patches, cleaned them up, splited into
> logical changes, added new patches and submitting it now.
>
> I tried to maintain authorship & Signoff except where I did some
> significant changes to the code/logic.
>
> Link to previous post:
> http://permalink.gmane.org/gmane.linux.drivers.i2c/13557
>
> Testing:
> - Basic testing on PMIC device on I2C-0 interface
> - Boot tested on platform based on PXA1928
> - Probe is successfully passing
> - Read few registers of PMIC (RTC, ID, etc...) during boot
>
>
> V1 => V2:
> ========
Ping !!!
Thanks,
Vaibhav
> Link to V1 - http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/347012.html
>
> - Fixed all comments from "Robert Jarzmik" and "Wolfram Sang"
> - Dropped Patch
> 05/12: using core bus reset implementation - under work.
> Will submit shortly.
> 08/12: NAKed and dropped
> - Seperated DT binding patch from driver changes, for easy merge
>
>
> Leilei Shang (1):
> i2c: pxa: keep i2c irq ON in suspend
>
> Shouming Wang (1):
> i2c: pxa: Return I2C_RETRY when timeout in pio mode
>
> Vaibhav Hiremath (8):
> i2c: pxa: No need to set slave addr for i2c master mode reset
> i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
> i2c: pxa: Update debug function to dump more info on error
> i2c:pxa: Use devm_ variants in probe function
> Documentation: binding: add new property 'disable_after_xfer' to
> i2c-pxa
> i2c: pxa: Add support for pxa910/988 & new configuration features
> i2c: pxa: Add ILCR (tLow & tHigh) configuration support
> Documentation: binding: add sclk adjustment properties to i2c-pxa
>
> Yi Zhang (1):
> i2c: pxa: enable/disable i2c module across msg xfer
>
> Yipeng Yao (1):
> i2c: pxa: Remove compile warnning in 64bit mode
>
> Documentation/devicetree/bindings/i2c/i2c-pxa.txt | 18 ++
> drivers/i2c/busses/i2c-pxa.c | 267 ++++++++++++++++------
> 2 files changed, 220 insertions(+), 65 deletions(-)
>
next prev parent reply other threads:[~2015-06-29 8:52 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <vaibhav.hiremath@linaro.org>
2015-06-02 18:45 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 1/3] i2c: core: append hardware lock with bus lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 2/3] i2c: pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 3/3] i2c: pxa: Add pin ctrl support for CP core access Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-16 8:28 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-16 8:28 ` Vaibhav Hiremath
2015-07-07 6:43 ` Vaibhav Hiremath
2015-07-07 6:43 ` Vaibhav Hiremath
2015-10-25 9:52 ` Wolfram Sang
2015-10-25 9:52 ` Wolfram Sang
2015-06-15 15:49 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 01/12] i2c: pxa: keep i2c irq ON in suspend Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 20:58 ` Robert Jarzmik
2015-07-03 20:58 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-16 5:31 ` Shubhrajyoti Datta
2015-06-16 5:31 ` Shubhrajyoti Datta
2015-06-16 7:41 ` Vaibhav Hiremath
2015-06-16 7:41 ` Vaibhav Hiremath
2015-07-03 21:07 ` Robert Jarzmik
2015-07-03 21:07 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and " Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:27 ` Robert Jarzmik
2015-07-03 15:27 ` Robert Jarzmik
2015-07-03 18:13 ` Vaibhav Hiremath
2015-07-03 18:13 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 05/12] i2c: pxa: Remove compile warnning in 64bit mode Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 06/12] i2c: pxa: Update debug function to dump more info on error Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:14 ` Vaibhav Hiremath
2015-07-03 18:14 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:23 ` Vaibhav Hiremath
2015-07-03 18:23 ` Vaibhav Hiremath
2015-07-03 18:48 ` Vaibhav Hiremath
2015-07-03 18:48 ` Vaibhav Hiremath
2015-07-03 19:44 ` Robert Jarzmik
2015-07-03 19:44 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 10/12] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:17 ` Vaibhav Hiremath
2015-07-03 18:17 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-16 13:22 ` Rob Herring
2015-06-16 13:22 ` Rob Herring
2015-06-16 14:25 ` Vaibhav Hiremath
2015-06-16 14:25 ` Vaibhav Hiremath
2015-06-29 8:52 ` Vaibhav Hiremath [this message]
2015-06-29 8:52 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-07-02 16:54 ` Vaibhav Hiremath
2015-07-02 16:54 ` Vaibhav Hiremath
2015-06-17 18:58 [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 1/3] mfd: 88pm800: Add device " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2] rtc: 88pm80x: add " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-23 15:37 ` Rob Herring
2015-06-23 15:37 ` Rob Herring
2015-06-23 15:37 ` [rtc-linux] " Rob Herring
2015-06-23 15:37 ` Rob Herring
2015-06-23 17:02 ` Vaibhav Hiremath
2015-06-23 17:02 ` Vaibhav Hiremath
2015-06-23 17:02 ` [rtc-linux] " Vaibhav Hiremath
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 0:29 ` [rtc-linux] " Krzysztof Kozlowski
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-24 5:19 ` [rtc-linux] " Vaibhav Hiremath
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-23 5:07 ` [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath
2015-06-23 5:07 ` Vaibhav Hiremath
2015-06-23 5:07 ` [rtc-linux] " Vaibhav Hiremath
2015-06-23 5:07 ` Vaibhav Hiremath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55910741.9020106@linaro.org \
--to=vaibhav.hiremath@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.