From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support
Date: Fri, 03 Jul 2015 23:47:10 +0530 [thread overview]
Message-ID: <5596D1A6.7030600@linaro.org> (raw)
In-Reply-To: <87vbe1b6ra.fsf@belgarion.home>
On Friday 03 July 2015 08:58 PM, Robert Jarzmik wrote:
> Vaibhav Hiremath <vaibhav.hiremath@linaro.org> writes:
>
>> + i2c->clk = devm_clk_get(&dev->dev, NULL);
>> + if (IS_ERR(i2c->clk)) {
>> + dev_err(&dev->dev, "failed to get the clk\n");
>> + dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk));
>
>> + return PTR_ERR(i2c->clk);
>> + }
> Why is this block moving up ? I can't find the reason in the commit message or
> in the code.
>
Because of obvious reason :)
The clk_rate is being used in i2c_pxa_probe_dt() function.
Although I did not mention in commit description as I felt it is
evident from the patch.
Probably should have been more descriptive here, sorry for that.
I will take care of it in next version.
Thanks,
Vaibhav
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Robert Jarzmik <robert.jarzmik-GANU6spQydw@public.gmane.org>
Cc: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
"Jett.Zhou" <jtzhou-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
Yi Zhang <yizhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
Subject: Re: [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support
Date: Fri, 03 Jul 2015 23:47:10 +0530 [thread overview]
Message-ID: <5596D1A6.7030600@linaro.org> (raw)
In-Reply-To: <87vbe1b6ra.fsf-4ty26DBLk+jEm7gnYqmdkQ@public.gmane.org>
On Friday 03 July 2015 08:58 PM, Robert Jarzmik wrote:
> Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> writes:
>
>> + i2c->clk = devm_clk_get(&dev->dev, NULL);
>> + if (IS_ERR(i2c->clk)) {
>> + dev_err(&dev->dev, "failed to get the clk\n");
>> + dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk));
>
>> + return PTR_ERR(i2c->clk);
>> + }
> Why is this block moving up ? I can't find the reason in the commit message or
> in the code.
>
Because of obvious reason :)
The clk_rate is being used in i2c_pxa_probe_dt() function.
Although I did not mention in commit description as I felt it is
evident from the patch.
Probably should have been more descriptive here, sorry for that.
I will take care of it in next version.
Thanks,
Vaibhav
next prev parent reply other threads:[~2015-07-03 18:17 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <vaibhav.hiremath@linaro.org>
2015-06-02 18:45 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 1/3] i2c: core: append hardware lock with bus lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 2/3] i2c: pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 3/3] i2c: pxa: Add pin ctrl support for CP core access Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-16 8:28 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-16 8:28 ` Vaibhav Hiremath
2015-07-07 6:43 ` Vaibhav Hiremath
2015-07-07 6:43 ` Vaibhav Hiremath
2015-10-25 9:52 ` Wolfram Sang
2015-10-25 9:52 ` Wolfram Sang
2015-06-15 15:49 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 01/12] i2c: pxa: keep i2c irq ON in suspend Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 20:58 ` Robert Jarzmik
2015-07-03 20:58 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-16 5:31 ` Shubhrajyoti Datta
2015-06-16 5:31 ` Shubhrajyoti Datta
2015-06-16 7:41 ` Vaibhav Hiremath
2015-06-16 7:41 ` Vaibhav Hiremath
2015-07-03 21:07 ` Robert Jarzmik
2015-07-03 21:07 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and " Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:27 ` Robert Jarzmik
2015-07-03 15:27 ` Robert Jarzmik
2015-07-03 18:13 ` Vaibhav Hiremath
2015-07-03 18:13 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 05/12] i2c: pxa: Remove compile warnning in 64bit mode Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 06/12] i2c: pxa: Update debug function to dump more info on error Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:14 ` Vaibhav Hiremath
2015-07-03 18:14 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:23 ` Vaibhav Hiremath
2015-07-03 18:23 ` Vaibhav Hiremath
2015-07-03 18:48 ` Vaibhav Hiremath
2015-07-03 18:48 ` Vaibhav Hiremath
2015-07-03 19:44 ` Robert Jarzmik
2015-07-03 19:44 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 10/12] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:17 ` Vaibhav Hiremath [this message]
2015-07-03 18:17 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-16 13:22 ` Rob Herring
2015-06-16 13:22 ` Rob Herring
2015-06-16 14:25 ` Vaibhav Hiremath
2015-06-16 14:25 ` Vaibhav Hiremath
2015-06-29 8:52 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-06-29 8:52 ` Vaibhav Hiremath
2015-07-02 16:54 ` Vaibhav Hiremath
2015-07-02 16:54 ` Vaibhav Hiremath
2015-06-17 18:58 [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 1/3] mfd: 88pm800: Add device " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2] rtc: 88pm80x: add " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-23 15:37 ` Rob Herring
2015-06-23 15:37 ` Rob Herring
2015-06-23 15:37 ` [rtc-linux] " Rob Herring
2015-06-23 15:37 ` Rob Herring
2015-06-23 17:02 ` Vaibhav Hiremath
2015-06-23 17:02 ` Vaibhav Hiremath
2015-06-23 17:02 ` [rtc-linux] " Vaibhav Hiremath
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 0:29 ` [rtc-linux] " Krzysztof Kozlowski
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-24 5:19 ` [rtc-linux] " Vaibhav Hiremath
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-23 5:07 ` [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath
2015-06-23 5:07 ` Vaibhav Hiremath
2015-06-23 5:07 ` [rtc-linux] " Vaibhav Hiremath
2015-06-23 5:07 ` Vaibhav Hiremath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5596D1A6.7030600@linaro.org \
--to=vaibhav.hiremath@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.