From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Date: Mon, 15 Jun 2015 21:19:54 +0530 [thread overview] Message-ID: <1434383399-2370-8-git-send-email-vaibhav.hiremath@linaro.org> (raw) In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath@linaro.org> This patch cleans up i2c_pxa_probe() function, - Use devm_ variants wherever This will clean both probe exit and i2c_pxa_remove() functions - Check platform resource before parsing any other data from DT/platform - Use dev_err on failure from i2c_add_numbered_adapter() - Use pr_info instead of printk for KERN_INFO Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> --- drivers/i2c/busses/i2c-pxa.c | 81 ++++++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 48 deletions(-) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index b8b3856..0a8b3bb 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1166,10 +1166,22 @@ static int i2c_pxa_probe(struct platform_device *dev) struct resource *res = NULL; int ret, irq; - i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); + i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL); if (!i2c) { - ret = -ENOMEM; - goto emalloc; + dev_err(&dev->dev, "memory allocation failed\n"); + return -ENOMEM; + } + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&dev->dev, "no mem resource\n"); + return -ENODEV; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "no irq resource: %d\n", irq); + return irq; } /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ @@ -1179,19 +1191,7 @@ static int i2c_pxa_probe(struct platform_device *dev) if (ret > 0) ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); if (ret < 0) - goto eclk; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - irq = platform_get_irq(dev, 0); - if (res == NULL || irq < 0) { - ret = -ENODEV; - goto eclk; - } - - if (!request_mem_region(res->start, resource_size(res), res->name)) { - ret = -ENOMEM; - goto eclk; - } + return ret; i2c->adap.owner = THIS_MODULE; i2c->adap.retries = 5; @@ -1201,16 +1201,17 @@ static int i2c_pxa_probe(struct platform_device *dev) strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name)); - i2c->clk = clk_get(&dev->dev, NULL); + i2c->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(i2c->clk)) { - ret = PTR_ERR(i2c->clk); - goto eclk; + dev_err(&dev->dev, "failed to get the clk\n"); + return PTR_ERR(i2c->clk); } - i2c->reg_base = ioremap(res->start, resource_size(res)); - if (!i2c->reg_base) { - ret = -EIO; - goto eremap; + i2c->reg_base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(i2c->reg_base)) { + dev_err(&dev->dev, "failed to map resource: %ld\n", + PTR_ERR(i2c->reg_base)); + return PTR_ERR(i2c->reg_base); } i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; @@ -1252,11 +1253,13 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { i2c->adap.algo = &i2c_pxa_algorithm; - ret = request_irq(irq, i2c_pxa_handler, + ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler, IRQF_SHARED | IRQF_NO_SUSPEND, dev_name(&dev->dev), i2c); - if (ret) + if (ret) { + dev_err(&dev->dev, "failed to request irq: %d\n", ret); goto ereqirq; + } } i2c_pxa_reset(i2c); @@ -1269,33 +1272,22 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { - printk(KERN_INFO "I2C: Failed to add bus\n"); - goto eadapt; + dev_err(&dev->dev, "failed to add bus: %d\n", ret); + goto ereqirq; } platform_set_drvdata(dev, i2c); #ifdef CONFIG_I2C_PXA_SLAVE - printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n", - dev_name(&i2c->adap.dev), i2c->slave_addr); + dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n", + i2c->slave_addr); #else - printk(KERN_INFO "I2C: %s: PXA I2C adapter\n", - dev_name(&i2c->adap.dev)); + dev_info(&i2c->adap.dev, " PXA I2C adapter\n"); #endif return 0; -eadapt: - if (!i2c->use_pio) - free_irq(irq, i2c); ereqirq: clk_disable_unprepare(i2c->clk); - iounmap(i2c->reg_base); -eremap: - clk_put(i2c->clk); -eclk: - kfree(i2c); -emalloc: - release_mem_region(res->start, resource_size(res)); return ret; } @@ -1304,15 +1296,8 @@ static int i2c_pxa_remove(struct platform_device *dev) struct pxa_i2c *i2c = platform_get_drvdata(dev); i2c_del_adapter(&i2c->adap); - if (!i2c->use_pio) - free_irq(i2c->irq, i2c); clk_disable_unprepare(i2c->clk); - clk_put(i2c->clk); - - iounmap(i2c->reg_base); - release_mem_region(i2c->iobase, i2c->iosize); - kfree(i2c); return 0; } -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org, robert.jarzmik-GANU6spQydw@public.gmane.org, Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Subject: [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Date: Mon, 15 Jun 2015 21:19:54 +0530 [thread overview] Message-ID: <1434383399-2370-8-git-send-email-vaibhav.hiremath@linaro.org> (raw) In-Reply-To: <1434383399-2370-1-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> This patch cleans up i2c_pxa_probe() function, - Use devm_ variants wherever This will clean both probe exit and i2c_pxa_remove() functions - Check platform resource before parsing any other data from DT/platform - Use dev_err on failure from i2c_add_numbered_adapter() - Use pr_info instead of printk for KERN_INFO Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- drivers/i2c/busses/i2c-pxa.c | 81 ++++++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 48 deletions(-) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index b8b3856..0a8b3bb 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1166,10 +1166,22 @@ static int i2c_pxa_probe(struct platform_device *dev) struct resource *res = NULL; int ret, irq; - i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); + i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL); if (!i2c) { - ret = -ENOMEM; - goto emalloc; + dev_err(&dev->dev, "memory allocation failed\n"); + return -ENOMEM; + } + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&dev->dev, "no mem resource\n"); + return -ENODEV; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "no irq resource: %d\n", irq); + return irq; } /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ @@ -1179,19 +1191,7 @@ static int i2c_pxa_probe(struct platform_device *dev) if (ret > 0) ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); if (ret < 0) - goto eclk; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - irq = platform_get_irq(dev, 0); - if (res == NULL || irq < 0) { - ret = -ENODEV; - goto eclk; - } - - if (!request_mem_region(res->start, resource_size(res), res->name)) { - ret = -ENOMEM; - goto eclk; - } + return ret; i2c->adap.owner = THIS_MODULE; i2c->adap.retries = 5; @@ -1201,16 +1201,17 @@ static int i2c_pxa_probe(struct platform_device *dev) strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name)); - i2c->clk = clk_get(&dev->dev, NULL); + i2c->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(i2c->clk)) { - ret = PTR_ERR(i2c->clk); - goto eclk; + dev_err(&dev->dev, "failed to get the clk\n"); + return PTR_ERR(i2c->clk); } - i2c->reg_base = ioremap(res->start, resource_size(res)); - if (!i2c->reg_base) { - ret = -EIO; - goto eremap; + i2c->reg_base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(i2c->reg_base)) { + dev_err(&dev->dev, "failed to map resource: %ld\n", + PTR_ERR(i2c->reg_base)); + return PTR_ERR(i2c->reg_base); } i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; @@ -1252,11 +1253,13 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { i2c->adap.algo = &i2c_pxa_algorithm; - ret = request_irq(irq, i2c_pxa_handler, + ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler, IRQF_SHARED | IRQF_NO_SUSPEND, dev_name(&dev->dev), i2c); - if (ret) + if (ret) { + dev_err(&dev->dev, "failed to request irq: %d\n", ret); goto ereqirq; + } } i2c_pxa_reset(i2c); @@ -1269,33 +1272,22 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { - printk(KERN_INFO "I2C: Failed to add bus\n"); - goto eadapt; + dev_err(&dev->dev, "failed to add bus: %d\n", ret); + goto ereqirq; } platform_set_drvdata(dev, i2c); #ifdef CONFIG_I2C_PXA_SLAVE - printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n", - dev_name(&i2c->adap.dev), i2c->slave_addr); + dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n", + i2c->slave_addr); #else - printk(KERN_INFO "I2C: %s: PXA I2C adapter\n", - dev_name(&i2c->adap.dev)); + dev_info(&i2c->adap.dev, " PXA I2C adapter\n"); #endif return 0; -eadapt: - if (!i2c->use_pio) - free_irq(irq, i2c); ereqirq: clk_disable_unprepare(i2c->clk); - iounmap(i2c->reg_base); -eremap: - clk_put(i2c->clk); -eclk: - kfree(i2c); -emalloc: - release_mem_region(res->start, resource_size(res)); return ret; } @@ -1304,15 +1296,8 @@ static int i2c_pxa_remove(struct platform_device *dev) struct pxa_i2c *i2c = platform_get_drvdata(dev); i2c_del_adapter(&i2c->adap); - if (!i2c->use_pio) - free_irq(i2c->irq, i2c); clk_disable_unprepare(i2c->clk); - clk_put(i2c->clk); - - iounmap(i2c->reg_base); - release_mem_region(i2c->iobase, i2c->iosize); - kfree(i2c); return 0; } -- 1.9.1
next prev parent reply other threads:[~2015-06-15 15:49 UTC|newest] Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <vaibhav.hiremath@linaro.org> 2015-06-02 18:45 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-02 18:45 ` [PATCH-RESEND 1/3] i2c: core: append hardware lock with bus lock Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-02 18:45 ` [PATCH-RESEND 2/3] i2c: pxa: Add support for hardware lock Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-02 18:45 ` [PATCH-RESEND 3/3] i2c: pxa: Add pin ctrl support for CP core access Vaibhav Hiremath 2015-06-02 18:45 ` Vaibhav Hiremath 2015-06-16 8:28 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath 2015-06-16 8:28 ` Vaibhav Hiremath 2015-07-07 6:43 ` Vaibhav Hiremath 2015-07-07 6:43 ` Vaibhav Hiremath 2015-10-25 9:52 ` Wolfram Sang 2015-10-25 9:52 ` Wolfram Sang 2015-06-15 15:49 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 01/12] i2c: pxa: keep i2c irq ON in suspend Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 20:58 ` Robert Jarzmik 2015-07-03 20:58 ` Robert Jarzmik 2015-06-15 15:49 ` [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-16 5:31 ` Shubhrajyoti Datta 2015-06-16 5:31 ` Shubhrajyoti Datta 2015-06-16 7:41 ` Vaibhav Hiremath 2015-06-16 7:41 ` Vaibhav Hiremath 2015-07-03 21:07 ` Robert Jarzmik 2015-07-03 21:07 ` Robert Jarzmik 2015-06-15 15:49 ` [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and " Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 15:27 ` Robert Jarzmik 2015-07-03 15:27 ` Robert Jarzmik 2015-07-03 18:13 ` Vaibhav Hiremath 2015-07-03 18:13 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 05/12] i2c: pxa: Remove compile warnning in 64bit mode Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 06/12] i2c: pxa: Update debug function to dump more info on error Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath [this message] 2015-06-15 15:49 ` [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Vaibhav Hiremath 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 18:14 ` Vaibhav Hiremath 2015-07-03 18:14 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 18:23 ` Vaibhav Hiremath 2015-07-03 18:23 ` Vaibhav Hiremath 2015-07-03 18:48 ` Vaibhav Hiremath 2015-07-03 18:48 ` Vaibhav Hiremath 2015-07-03 19:44 ` Robert Jarzmik 2015-07-03 19:44 ` Robert Jarzmik 2015-06-15 15:49 ` [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 10/12] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 15:28 ` Robert Jarzmik 2015-07-03 18:17 ` Vaibhav Hiremath 2015-07-03 18:17 ` Vaibhav Hiremath 2015-06-15 15:49 ` [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath 2015-06-15 15:49 ` Vaibhav Hiremath 2015-06-16 13:22 ` Rob Herring 2015-06-16 13:22 ` Rob Herring 2015-06-16 14:25 ` Vaibhav Hiremath 2015-06-16 14:25 ` Vaibhav Hiremath 2015-06-29 8:52 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath 2015-06-29 8:52 ` Vaibhav Hiremath 2015-07-02 16:54 ` Vaibhav Hiremath 2015-07-02 16:54 ` Vaibhav Hiremath 2015-06-17 18:58 [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2 1/3] mfd: 88pm800: Add device " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2] rtc: 88pm80x: add " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-20 0:43 ` Alexandre Belloni 2015-06-20 0:43 ` Alexandre Belloni 2015-06-20 0:43 ` Alexandre Belloni 2015-06-20 0:43 ` Alexandre Belloni 2015-06-25 7:46 ` Vaibhav Hiremath 2015-06-25 7:46 ` Vaibhav Hiremath 2015-06-25 7:46 ` Vaibhav Hiremath 2015-06-25 7:46 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-07-07 6:37 ` Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [PATCH-v2 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath 2015-06-17 18:58 ` Vaibhav Hiremath 2015-06-23 15:37 ` Rob Herring 2015-06-23 15:37 ` Rob Herring 2015-06-23 15:37 ` [rtc-linux] " Rob Herring 2015-06-23 15:37 ` Rob Herring 2015-06-23 17:02 ` Vaibhav Hiremath 2015-06-23 17:02 ` Vaibhav Hiremath 2015-06-23 17:02 ` [rtc-linux] " Vaibhav Hiremath 2015-06-24 0:29 ` Krzysztof Kozlowski 2015-06-24 0:29 ` Krzysztof Kozlowski 2015-06-24 0:29 ` [rtc-linux] " Krzysztof Kozlowski 2015-06-24 0:29 ` Krzysztof Kozlowski 2015-06-24 5:19 ` Vaibhav Hiremath 2015-06-24 5:19 ` Vaibhav Hiremath 2015-06-24 5:19 ` [rtc-linux] " Vaibhav Hiremath 2015-06-24 5:19 ` Vaibhav Hiremath 2015-06-23 5:07 ` [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath 2015-06-23 5:07 ` Vaibhav Hiremath 2015-06-23 5:07 ` [rtc-linux] " Vaibhav Hiremath 2015-06-23 5:07 ` Vaibhav Hiremath
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1434383399-2370-8-git-send-email-vaibhav.hiremath@linaro.org \ --to=vaibhav.hiremath@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.