From: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
To: linux-arm-kernel@lists.infradead.org
Cc: robh+dt@kernel.org, lee.jones@linaro.org,
devicetree@vger.kernel.org, rtc-linux@googlegroups.com,
linux-kernel@vger.kernel.org,
Vaibhav Hiremath <vaibhav.hiremath@linaro.org>,
Zhao Ye <zhaoy@marvell.com>
Subject: [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method
Date: Thu, 18 Jun 2015 00:28:07 +0530 [thread overview]
Message-ID: <1434567488-6477-4-git-send-email-vaibhav.hiremath@linaro.org> (raw)
In-Reply-To: <1434567488-6477-1-git-send-email-vaibhav.hiremath@linaro.org>
As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
(page 0) controls the method of clearing interrupt
status of 88pm800 family of devices;
0: clear on read
1: clear on write
This patch allows to configure this field, through DT.
Also, as suggested by "Lee Jones" renaming DT property and variable
field to appropriate name.
Signed-off-by: Zhao Ye <zhaoy@marvell.com>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
drivers/mfd/88pm800.c | 15 ++++++++++-----
include/linux/mfd/88pm80x.h | 6 ++++--
2 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 059f01a..c1a6306 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -376,7 +376,7 @@ static int device_irq_init_800(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_ONESHOT;
- int data, mask, ret = -EINVAL;
+ int irq_clr_mode, mask, ret = -EINVAL;
if (!map || !chip->irq) {
dev_err(chip->dev, "incorrect parameters\n");
@@ -384,15 +384,16 @@ static int device_irq_init_800(struct pm80x_chip *chip)
}
/*
- * irq_mode defines the way of clearing interrupt. it's read-clear by
- * default.
+ * irq_clr_on_wr defines the way of clearing interrupt by
+ * read/write(0/1). It's read-clear by default.
*/
mask =
PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
PM800_WAKEUP2_INT_MASK;
- data = PM800_WAKEUP2_INT_CLEAR;
- ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
+ irq_clr_mode = (chip->irq_clr_on_wr) ?
+ PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
+ ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode);
if (ret < 0)
goto out;
@@ -514,6 +515,7 @@ static int device_800_init(struct pm80x_chip *chip,
}
chip->regmap_irq_chip = &pm800_irq_chip;
+ chip->irq_clr_on_wr = pdata->irq_clr_on_wr;
ret = device_irq_init_800(chip);
if (ret < 0) {
@@ -568,6 +570,9 @@ static int pm800_probe(struct i2c_client *client,
dev_err(&client->dev, "failed to allocaate memory\n");
return -ENOMEM;
}
+
+ pdata->irq_clr_on_wr = of_property_read_bool(np,
+ "marvell,irq-clr-on-write");
}
ret = pm80x_init(client);
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 97cb283..94b3dcd 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -77,6 +77,8 @@ enum {
#define PM800_WAKEUP2 (0x0E)
#define PM800_WAKEUP2_INV_INT (1 << 0)
#define PM800_WAKEUP2_INT_CLEAR (1 << 1)
+#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1)
+#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1)
#define PM800_WAKEUP2_INT_MASK (1 << 2)
#define PM800_POWER_UP_LOG (0x10)
@@ -300,7 +302,7 @@ struct pm80x_chip {
struct regmap_irq_chip_data *irq_data;
int type;
int irq;
- int irq_mode;
+ int irq_clr_on_wr; /* '1': Clear on write, '0': Clear on read*/
unsigned long wu_flag;
spinlock_t lock;
};
@@ -315,7 +317,7 @@ struct pm80x_platform_data {
*/
struct regulator_init_data *regulators[PM800_ID_RG_MAX];
unsigned int num_regulators;
- int irq_mode; /* Clear interrupt by read/write(0/1) */
+ int irq_clr_on_wr; /* Clear interrupt by read/write(0/1) */
int batt_det; /* enable/disable */
int (*plat_config)(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata);
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Vaibhav Hiremath
<vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Zhao Ye <zhaoy-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
Subject: [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method
Date: Thu, 18 Jun 2015 00:28:07 +0530 [thread overview]
Message-ID: <1434567488-6477-4-git-send-email-vaibhav.hiremath@linaro.org> (raw)
In-Reply-To: <1434567488-6477-1-git-send-email-vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
(page 0) controls the method of clearing interrupt
status of 88pm800 family of devices;
0: clear on read
1: clear on write
This patch allows to configure this field, through DT.
Also, as suggested by "Lee Jones" renaming DT property and variable
field to appropriate name.
Signed-off-by: Zhao Ye <zhaoy-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/mfd/88pm800.c | 15 ++++++++++-----
include/linux/mfd/88pm80x.h | 6 ++++--
2 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 059f01a..c1a6306 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -376,7 +376,7 @@ static int device_irq_init_800(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_ONESHOT;
- int data, mask, ret = -EINVAL;
+ int irq_clr_mode, mask, ret = -EINVAL;
if (!map || !chip->irq) {
dev_err(chip->dev, "incorrect parameters\n");
@@ -384,15 +384,16 @@ static int device_irq_init_800(struct pm80x_chip *chip)
}
/*
- * irq_mode defines the way of clearing interrupt. it's read-clear by
- * default.
+ * irq_clr_on_wr defines the way of clearing interrupt by
+ * read/write(0/1). It's read-clear by default.
*/
mask =
PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
PM800_WAKEUP2_INT_MASK;
- data = PM800_WAKEUP2_INT_CLEAR;
- ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
+ irq_clr_mode = (chip->irq_clr_on_wr) ?
+ PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
+ ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode);
if (ret < 0)
goto out;
@@ -514,6 +515,7 @@ static int device_800_init(struct pm80x_chip *chip,
}
chip->regmap_irq_chip = &pm800_irq_chip;
+ chip->irq_clr_on_wr = pdata->irq_clr_on_wr;
ret = device_irq_init_800(chip);
if (ret < 0) {
@@ -568,6 +570,9 @@ static int pm800_probe(struct i2c_client *client,
dev_err(&client->dev, "failed to allocaate memory\n");
return -ENOMEM;
}
+
+ pdata->irq_clr_on_wr = of_property_read_bool(np,
+ "marvell,irq-clr-on-write");
}
ret = pm80x_init(client);
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 97cb283..94b3dcd 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -77,6 +77,8 @@ enum {
#define PM800_WAKEUP2 (0x0E)
#define PM800_WAKEUP2_INV_INT (1 << 0)
#define PM800_WAKEUP2_INT_CLEAR (1 << 1)
+#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1)
+#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1)
#define PM800_WAKEUP2_INT_MASK (1 << 2)
#define PM800_POWER_UP_LOG (0x10)
@@ -300,7 +302,7 @@ struct pm80x_chip {
struct regmap_irq_chip_data *irq_data;
int type;
int irq;
- int irq_mode;
+ int irq_clr_on_wr; /* '1': Clear on write, '0': Clear on read*/
unsigned long wu_flag;
spinlock_t lock;
};
@@ -315,7 +317,7 @@ struct pm80x_platform_data {
*/
struct regulator_init_data *regulators[PM800_ID_RG_MAX];
unsigned int num_regulators;
- int irq_mode; /* Clear interrupt by read/write(0/1) */
+ int irq_clr_on_wr; /* Clear interrupt by read/write(0/1) */
int batt_det; /* enable/disable */
int (*plat_config)(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
To: linux-arm-kernel@lists.infradead.org
Cc: robh+dt@kernel.org, lee.jones@linaro.org,
devicetree@vger.kernel.org, rtc-linux@googlegroups.com,
linux-kernel@vger.kernel.org,
Vaibhav Hiremath <vaibhav.hiremath@linaro.org>,
Zhao Ye <zhaoy@marvell.com>
Subject: [rtc-linux] [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method
Date: Thu, 18 Jun 2015 00:28:07 +0530 [thread overview]
Message-ID: <1434567488-6477-4-git-send-email-vaibhav.hiremath@linaro.org> (raw)
In-Reply-To: <1434567488-6477-1-git-send-email-vaibhav.hiremath@linaro.org>
As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
(page 0) controls the method of clearing interrupt
status of 88pm800 family of devices;
0: clear on read
1: clear on write
This patch allows to configure this field, through DT.
Also, as suggested by "Lee Jones" renaming DT property and variable
field to appropriate name.
Signed-off-by: Zhao Ye <zhaoy@marvell.com>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
drivers/mfd/88pm800.c | 15 ++++++++++-----
include/linux/mfd/88pm80x.h | 6 ++++--
2 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 059f01a..c1a6306 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -376,7 +376,7 @@ static int device_irq_init_800(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_ONESHOT;
- int data, mask, ret = -EINVAL;
+ int irq_clr_mode, mask, ret = -EINVAL;
if (!map || !chip->irq) {
dev_err(chip->dev, "incorrect parameters\n");
@@ -384,15 +384,16 @@ static int device_irq_init_800(struct pm80x_chip *chip)
}
/*
- * irq_mode defines the way of clearing interrupt. it's read-clear by
- * default.
+ * irq_clr_on_wr defines the way of clearing interrupt by
+ * read/write(0/1). It's read-clear by default.
*/
mask =
PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
PM800_WAKEUP2_INT_MASK;
- data = PM800_WAKEUP2_INT_CLEAR;
- ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
+ irq_clr_mode = (chip->irq_clr_on_wr) ?
+ PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
+ ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode);
if (ret < 0)
goto out;
@@ -514,6 +515,7 @@ static int device_800_init(struct pm80x_chip *chip,
}
chip->regmap_irq_chip = &pm800_irq_chip;
+ chip->irq_clr_on_wr = pdata->irq_clr_on_wr;
ret = device_irq_init_800(chip);
if (ret < 0) {
@@ -568,6 +570,9 @@ static int pm800_probe(struct i2c_client *client,
dev_err(&client->dev, "failed to allocaate memory\n");
return -ENOMEM;
}
+
+ pdata->irq_clr_on_wr = of_property_read_bool(np,
+ "marvell,irq-clr-on-write");
}
ret = pm80x_init(client);
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 97cb283..94b3dcd 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -77,6 +77,8 @@ enum {
#define PM800_WAKEUP2 (0x0E)
#define PM800_WAKEUP2_INV_INT (1 << 0)
#define PM800_WAKEUP2_INT_CLEAR (1 << 1)
+#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1)
+#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1)
#define PM800_WAKEUP2_INT_MASK (1 << 2)
#define PM800_POWER_UP_LOG (0x10)
@@ -300,7 +302,7 @@ struct pm80x_chip {
struct regmap_irq_chip_data *irq_data;
int type;
int irq;
- int irq_mode;
+ int irq_clr_on_wr; /* '1': Clear on write, '0': Clear on read*/
unsigned long wu_flag;
spinlock_t lock;
};
@@ -315,7 +317,7 @@ struct pm80x_platform_data {
*/
struct regulator_init_data *regulators[PM800_ID_RG_MAX];
unsigned int num_regulators;
- int irq_mode; /* Clear interrupt by read/write(0/1) */
+ int irq_clr_on_wr; /* Clear interrupt by read/write(0/1) */
int batt_det; /* enable/disable */
int (*plat_config)(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata);
--
1.9.1
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method
Date: Thu, 18 Jun 2015 00:28:07 +0530 [thread overview]
Message-ID: <1434567488-6477-4-git-send-email-vaibhav.hiremath@linaro.org> (raw)
In-Reply-To: <1434567488-6477-1-git-send-email-vaibhav.hiremath@linaro.org>
As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
(page 0) controls the method of clearing interrupt
status of 88pm800 family of devices;
0: clear on read
1: clear on write
This patch allows to configure this field, through DT.
Also, as suggested by "Lee Jones" renaming DT property and variable
field to appropriate name.
Signed-off-by: Zhao Ye <zhaoy@marvell.com>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
drivers/mfd/88pm800.c | 15 ++++++++++-----
include/linux/mfd/88pm80x.h | 6 ++++--
2 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 059f01a..c1a6306 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -376,7 +376,7 @@ static int device_irq_init_800(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_ONESHOT;
- int data, mask, ret = -EINVAL;
+ int irq_clr_mode, mask, ret = -EINVAL;
if (!map || !chip->irq) {
dev_err(chip->dev, "incorrect parameters\n");
@@ -384,15 +384,16 @@ static int device_irq_init_800(struct pm80x_chip *chip)
}
/*
- * irq_mode defines the way of clearing interrupt. it's read-clear by
- * default.
+ * irq_clr_on_wr defines the way of clearing interrupt by
+ * read/write(0/1). It's read-clear by default.
*/
mask =
PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
PM800_WAKEUP2_INT_MASK;
- data = PM800_WAKEUP2_INT_CLEAR;
- ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
+ irq_clr_mode = (chip->irq_clr_on_wr) ?
+ PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
+ ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode);
if (ret < 0)
goto out;
@@ -514,6 +515,7 @@ static int device_800_init(struct pm80x_chip *chip,
}
chip->regmap_irq_chip = &pm800_irq_chip;
+ chip->irq_clr_on_wr = pdata->irq_clr_on_wr;
ret = device_irq_init_800(chip);
if (ret < 0) {
@@ -568,6 +570,9 @@ static int pm800_probe(struct i2c_client *client,
dev_err(&client->dev, "failed to allocaate memory\n");
return -ENOMEM;
}
+
+ pdata->irq_clr_on_wr = of_property_read_bool(np,
+ "marvell,irq-clr-on-write");
}
ret = pm80x_init(client);
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 97cb283..94b3dcd 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -77,6 +77,8 @@ enum {
#define PM800_WAKEUP2 (0x0E)
#define PM800_WAKEUP2_INV_INT (1 << 0)
#define PM800_WAKEUP2_INT_CLEAR (1 << 1)
+#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1)
+#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1)
#define PM800_WAKEUP2_INT_MASK (1 << 2)
#define PM800_POWER_UP_LOG (0x10)
@@ -300,7 +302,7 @@ struct pm80x_chip {
struct regmap_irq_chip_data *irq_data;
int type;
int irq;
- int irq_mode;
+ int irq_clr_on_wr; /* '1': Clear on write, '0': Clear on read*/
unsigned long wu_flag;
spinlock_t lock;
};
@@ -315,7 +317,7 @@ struct pm80x_platform_data {
*/
struct regulator_init_data *regulators[PM800_ID_RG_MAX];
unsigned int num_regulators;
- int irq_mode; /* Clear interrupt by read/write(0/1) */
+ int irq_clr_on_wr; /* Clear interrupt by read/write(0/1) */
int batt_det; /* enable/disable */
int (*plat_config)(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata);
--
1.9.1
next prev parent reply other threads:[~2015-06-17 19:02 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 18:58 [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 1/3] mfd: 88pm800: Add device " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2] rtc: 88pm80x: add " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-20 0:43 ` Alexandre Belloni
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-06-25 7:46 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-07-07 6:37 ` Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath [this message]
2015-06-17 18:58 ` [PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [PATCH-v2 3/3] mfd: devicetree: bindings: Add new 88pm800 mfd binding Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-17 18:58 ` [rtc-linux] " Vaibhav Hiremath
2015-06-17 18:58 ` Vaibhav Hiremath
2015-06-23 15:37 ` Rob Herring
2015-06-23 15:37 ` Rob Herring
2015-06-23 15:37 ` [rtc-linux] " Rob Herring
2015-06-23 15:37 ` Rob Herring
2015-06-23 17:02 ` Vaibhav Hiremath
2015-06-23 17:02 ` Vaibhav Hiremath
2015-06-23 17:02 ` [rtc-linux] " Vaibhav Hiremath
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 0:29 ` [rtc-linux] " Krzysztof Kozlowski
2015-06-24 0:29 ` Krzysztof Kozlowski
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-24 5:19 ` [rtc-linux] " Vaibhav Hiremath
2015-06-24 5:19 ` Vaibhav Hiremath
2015-06-23 5:07 ` [PATCH-v2 0/3] mfd: 88pm800: Add Device tree support Vaibhav Hiremath
2015-06-23 5:07 ` Vaibhav Hiremath
2015-06-23 5:07 ` [rtc-linux] " Vaibhav Hiremath
2015-06-23 5:07 ` Vaibhav Hiremath
[not found] <vaibhav.hiremath@linaro.org>
2015-06-02 18:45 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 1/3] i2c: core: append hardware lock with bus lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 2/3] i2c: pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-02 18:45 ` [PATCH-RESEND 3/3] i2c: pxa: Add pin ctrl support for CP core access Vaibhav Hiremath
2015-06-02 18:45 ` Vaibhav Hiremath
2015-06-16 8:28 ` [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock Vaibhav Hiremath
2015-06-16 8:28 ` Vaibhav Hiremath
2015-07-07 6:43 ` Vaibhav Hiremath
2015-07-07 6:43 ` Vaibhav Hiremath
2015-10-25 9:52 ` Wolfram Sang
2015-10-25 9:52 ` Wolfram Sang
2015-06-15 15:49 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 01/12] i2c: pxa: keep i2c irq ON in suspend Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 20:58 ` Robert Jarzmik
2015-07-03 20:58 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-16 5:31 ` Shubhrajyoti Datta
2015-06-16 5:31 ` Shubhrajyoti Datta
2015-06-16 7:41 ` Vaibhav Hiremath
2015-06-16 7:41 ` Vaibhav Hiremath
2015-07-03 21:07 ` Robert Jarzmik
2015-07-03 21:07 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and " Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:27 ` Robert Jarzmik
2015-07-03 15:27 ` Robert Jarzmik
2015-07-03 18:13 ` Vaibhav Hiremath
2015-07-03 18:13 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 05/12] i2c: pxa: Remove compile warnning in 64bit mode Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 06/12] i2c: pxa: Update debug function to dump more info on error Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:14 ` Vaibhav Hiremath
2015-07-03 18:14 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:23 ` Vaibhav Hiremath
2015-07-03 18:23 ` Vaibhav Hiremath
2015-07-03 18:48 ` Vaibhav Hiremath
2015-07-03 18:48 ` Vaibhav Hiremath
2015-07-03 19:44 ` Robert Jarzmik
2015-07-03 19:44 ` Robert Jarzmik
2015-06-15 15:49 ` [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 10/12] i2c: pxa: Add support for pxa910/988 & new configuration features Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 15:28 ` Robert Jarzmik
2015-07-03 18:17 ` Vaibhav Hiremath
2015-07-03 18:17 ` Vaibhav Hiremath
2015-06-15 15:49 ` [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa Vaibhav Hiremath
2015-06-15 15:49 ` Vaibhav Hiremath
2015-06-16 13:22 ` Rob Herring
2015-06-16 13:22 ` Rob Herring
2015-06-16 14:25 ` Vaibhav Hiremath
2015-06-16 14:25 ` Vaibhav Hiremath
2015-06-29 8:52 ` [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family Vaibhav Hiremath
2015-06-29 8:52 ` Vaibhav Hiremath
2015-07-02 16:54 ` Vaibhav Hiremath
2015-07-02 16:54 ` Vaibhav Hiremath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434567488-6477-4-git-send-email-vaibhav.hiremath@linaro.org \
--to=vaibhav.hiremath@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=zhaoy@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.